FUJI错误代码查询.pdf - 第2279页
Remedy: Check the data settings under"BLOCK","SEQUENCE+"of"UNIT","PROGRAM". The number of lines where item"GSQST"can be set to'S'or'E'are limited. Del…
Used by:
Cause: In "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" in the specified production program, the reported
device line is not referred to in "BLOCK", "SEQUENCE+".
Remedy: Check the data setting in "UNIT", "PROGRAM" - "BLOCK", "SEQUENCE+" in the production
program. Also check the data setting in "UNIT", "PROGRAM" - "BLOCK", "DEVICE+".
------------------------------
Code: 52??1111
Display: Out of range device data.
Used by:
Cause: In "BLOCK", "DEVICE+" in "UNIT", "PROGRAM" there are device lines with "GUTSTN", "GUTSLTN"
values or "GUTDN" values which are invalid for the applicable machine type.
Remedy: Check the data settings for "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" in the production
program.
------------------------------
Code: 52??1112
Display: Multiply defined device data.
Used by:
Cause: In "BLOCK", "DEVICE+" in "UNIT", "PROGRAM" the data lines for the reported device are multiply
defined.
Remedy: Check the data settings for "UNIT", "PROGRAM" - "BLOCK", "DEVICE+" in the production
program.
------------------------------
Code: 52??1120
Display: The"GSQGSS"value is out of range.
Used by:
Cause: The value for item"GSQGSS"has been detected as out of range at the data reading of
"BLOCK","SEQUENCE+"when"UNIT","PROGRAM"of the specified production program was read.
Remedy: Check the data settings under"BLOCK","SEQUENCE+"of"UNIT","PROGRAM". Since the sequence
number where the error occurs is generally recorded in supplemental data,check the corresponding
sequence data line.
------------------------------
Code: 52??1121
Display: The data values for the item"GSQGSS"are the same for the lines where the item"GSQST"are set
to'S'and'E'.
Used by:
Cause: In the lines where'S'and'E'are set for the item"GSQST",the values set,in the
corresponding"GSQGSS"item,are the same. This was determined at the data reading
of"BLOCK","SEQUENCE+"when"UNIT","PROGRAM"of the specified production program was read.
Remedy: Check the data settings under"BLOCK","SEQUENCE+"of"UNIT","PROGRAM". The value for
item"GSQGSS",of the line where item"GSQST"is set to'S',cannot be the same as the value for
the"GSQGSS"item of the line where item"GSQST"is set to'E'.If the values for item"GSQST"are the same,no
error occurs even if more than one line containing the same value for item"GSQGSS"exists.Since the
sequence number where the error occurs is generally recorded in supplemental data,check the
corresponding sequence data line as well as the lines before it.
------------------------------
Code: 52??1122
Display: Too many"GSQGSS"entries.
Used by:
Cause: There are too many lines which are set to'S'and'E'in item"GSQST". This was determined at the
data reading of"BLOCK","SEQUENCE+"when"UNIT","PROGRAM"of the specified production program was
read.
第 2278 页
Remedy: Check the data settings under"BLOCK","SEQUENCE+"of"UNIT","PROGRAM". The number of
lines where item"GSQST"can be set to'S'or'E'are limited. Delete lines where the'S'or'E'settings for
item"GSQST"are not needed or check that the settings for item"GSQST"are not mistaken.Since the
sequence number where the error occurs is generally recorded in supplemental data,check the
corresponding sequence data line.
------------------------------
Code: 52??1125
Display: The GSS data"ELEMENT"value is out of range.
Used by:
Cause: The value for item"ELEMENT"has been detected as out of range at the data reading of
"BLOCK","SOLDER"or"BLOCK","SOLCO"when"UNIT","PROGRAM"of the specified production program was
read.
Remedy: Check the setting for
item"ELEMENT"under"BLOCK","SOLDER"or"BLOCK","SOLCO"of"UNIT","PROGRAM". Since the name of
the block("SOLDER"or"SOLCO")and the"ELEMENT"value where the error occurs is generally recorded in
supplemental data,check there.
------------------------------
Code: 52??1126
Display: The GSS data item"ELEMENT"is the same under both SOLDER and SOLCO.
Used by:
Cause: The value for item"ELEMENT"in"BLOCK","SOLDER"and"BLOCK","SOLCO" are the same.This was
determined at the data reading of"BLOCK","SEQUENCE+"when"UNIT","PROGRAM"of the specified
production program was read.
Remedy: Check the data settings under"BLOCK","SOLDER"or"BLOCK","SOLCO"of"UNIT","PROGRAM". The
value for item"ELEMENT"under"BLOCK","SOLDER"cannot be the same as the value for
item"ELEMENT"under"BLOCK","SOLCO"line where item"GSQST"is set to'E'. If the values for
item"ELEMENT"are the same within the same block,no error occurs even if there is more than
one"ELEMENT"item. Since the name of block("SOLDER"or"SOLCO")and the "ELEMENT"value where the
error occurs is generally recorded in supplemental data,check the "ELEMENT"item of the block that was
not specified.
------------------------------
Code: 52??1127
Display: Too many GSS data "ELEMENT"entries.
Used by:
Cause: The GSS data"ELEMENT"entries specified under"BLOCK","SOLDER"and"BLOCK","SOLCO". This
was determined when"UNIT","PROGRAM"of the specified production program was read.
Remedy: Check the data settings under"BLOCK","SOLDER"or"BLOCK","SOLCO"of"UNIT","PROGRAM". The
number of individual"ELEMENT"values which can be set under"BLOCK","SOLDER"or"BLOCK","SOLCO"are
limited.Since the name of the block("SOLDER"or"SOLCO")and the "ELEMENT"value where the error occurs
is generally recorded in supplemental data,check there.
------------------------------
Code: 52??1140
Display: No"BLOCK","SOLDER"under"UNIT","PROGRAM"
Used by:
Cause: "BLOCK","SOLDER"was not found under"UNIT","PROGRAM"of the specified production program.
Remedy: Check the settings made for"BLOCK","SOLDER"under"UNIT","PROGRAM"of the production
program.
------------------------------
Code: 52??1141
Display: Multiple"BLOCK","SOLDER"sections.
Used by:
第 2279 页
Cause: Multiple"BLOCK","SOLDER"sections are defined under"UNIT","PROGRAM"of the specified
production program. This is reported only at the default check.
Remedy: Check the settings made for"BLOCK","SOLDER"under"UNIT","PROGRAM"of the production
program.
------------------------------
Code: 52??1142
Display: "ELEMENT"is not found under"BLOCK","SOLDER"
Used by:
Cause: The item"ELEMENT"under"BLOCK","SOLDER"does not exist. This was determined
when"UNIT","PROGRAM"of the specified production program was read.
Remedy: Check the settings under"BLOCK","SOLDER"of"UNIT","PROGRAM"in the production program.
------------------------------
Code: 52??1143
Display: Multiple"ELEMENT"under"BLOCK","SOLDER".
Used by:
Cause: The values within the specified item"ELEMENT"under"BLOCK","SOLDER"are the same. This was
determined when"UNIT","PROGRAM"of the specified production program was read. This is reported only at
the default check.
Remedy: Check the settings for item"ELEMENT"under"BLOCK","SOLDER"of"UNIT","PROGRAM"of the
production program. Since the name of the block("SOLDER")of the specified"ELEMENT"item and the value
of the item"ELEMENT"where the error occurs is generally recorded in supplemental data,check there.
------------------------------
Code: 52??1150
Display: The corresponding"SOLDER"data is not found.
Used by:
Cause: The data to be referenced by the sequence data specified in the
item"ELEMENT"under"BLOCK","SOLDER"does not exist. This was determined when"UNIT","PROGRAM"of
the specified production program was read.
Remedy: Check the settings for the item"ELEMENT"under"BLOCK","SOLDER"of"UNIT","PROGRAM"in the
production program. Since the name of the block("SOLDER")and the value of the item"ELEMENT"which is
referenced by the sequence data is generally recorded in supplemental data,check there.
Additionally,check the relating references of the"SOLDER"data
under"BLOCK","SEQUENCE+"of"UNIT","PROGRAM".
------------------------------
Code: 52??1151
Display: No item definition lines in item"ELEMENT"under"BLOCK","SOLDER".
Used by:
Cause: There are no item definition lines in the specified item "ELEMENT"under"BLOCK","SOLDER". This
was determined when"UNIT","PROGRAM"of the specified production program was read.
Remedy: Check the settings for the item"ELEMENT"under"BLOCK","SOLDER"of"UNIT","PROGRAM"in the
production program. Since the name of the block("SOLDER")and the value of the item"ELEMENT"are
generally reported in supplemental data,check there.
------------------------------
Code: 52??1152
Display: "ELEMENT"item definition format error under"BLOCK","SOLDER".
Used by:
Cause: A format error was discovered in the"ELEMENT"item definition lines
under"BLOCK","SOLDER"when"UNIT","PROGRAM"of the specified production program was read.
Remedy: Check the"ELEMENT"item definition line settings
under"BLOCK","SOLDER"of"UNIT","PROGRAM"in the production program. Since the name of the
block("SOLDER")and the value of the item"ELEMENT"are generally reported in supplemental data,check
第 2280 页