FUJI错误代码查询.pdf - 第1537页

Code: 1D214003 Display: 1D214003 Used by: Cause: Coarse location of the part was not successful. Remedy: Check the camera, the camera focus, the vision processing board and the cables. Remove any foreign objects which ma…

100%1 / 5282
Code: 1D210004
Display:
Used by:
Cause: Unable to find the lead.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D210005
Display:
Used by:
Cause: The X direction is too long. The separation between 2 of the left/ right lead ends exceeds the
value input in Part data by over 20%.
Remedy: Check the lead width, the part shape, and the conditions under which the image is taken.
------------------------------
Code: 1D210006
Display: 1D210006
Used by:
Cause: The length in the x direction is too short.
Remedy: Check the length of the part.
------------------------------
Code: 1D210010
Display: 1D210010(CP2,3)
Used by:
Cause: The leads are too long.
Remedy: Check the lead length.
------------------------------
Code: 1D210018
Display: 1D210018(CP2,3)
Used by:
Cause: The width of the lead is more than 50% wider than the input value.
Remedy: Check the lead width.
------------------------------
Code: 1D210019
Display: 1D210019(CP2,3)
Used by:
Cause: The width of the lead is more than 50% narrower than the input value.
Remedy: Check the lead width.
------------------------------
Code: 1D214001
Display: 1D214001
Used by:
Cause: This is a part data error.
Remedy: Check that the part data is correct.
------------------------------
Code: 1D214002
Display: 1D214002
Used by:
Cause: There are no parts.
Remedy: Check the camera, the camera focus, the vision processing board and the cables. Remove any
foreign objects which may be present.
------------------------------
第 1536 页
Code: 1D214003
Display: 1D214003
Used by:
Cause: Coarse location of the part was not successful.
Remedy: Check the camera, the camera focus, the vision processing board and the cables. Remove any
foreign objects which may be present.
------------------------------
Code: 1D214004
Display: 1D214004
Used by:
Cause: The leads cannot be found.
Remedy: Check the camera, the camera focus, the vision processing board and the cables. Remove any
foreign objects which may be present.
------------------------------
Code: 1D214005
Display: 1D214005
Used by:
Cause: The x dimension of the part is more than 20% longer than the input value.
Remedy: Check the length of the part's x dimension.
------------------------------
Code: 1D214006
Display: 1D214006
Used by:
Cause: The x dimension of the part is more than 20% shorter than the input value.
Remedy: Check the length of the part's x dimension.
------------------------------
Code: 1D214010
Display: 1D214010
Used by:
Cause: The leads are too long.
Remedy: Check the lead length.
------------------------------
Code: 1D214018
Display: 1D214018
Used by:
Cause: The width of the lead is more than 50% wider than the input value.
Remedy: Check the lead width.
------------------------------
Code: 1D214019
Display: 1D214019
Used by:
Cause: The width of the lead is more than 50% narrower than the input value.
Remedy: Check the lead width.
------------------------------
Code: 1D218002
Display:
Used by:
Cause: The part was not picked. The nozzle used with this part is too large. Vision processing could not
detect any part.
Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower
the CCD level so that parts can be detected.
第 1537 页
------------------------------
Code: 1D218100
Display:
Used by:
Cause: This Computer Vision No. is not supported.
Remedy: Check the Computer Vision No. in Part Data.
------------------------------
Code: 1D218110
Display:
Used by:
Cause: Lead_pitch (pitch between the lead spaces) in Part data has not been specified.
Remedy: Specify Lead_pitch in Part data.
------------------------------
Code: 1D218111
Display:
Used by:
Cause: Lead_width in Part data has not been specified.
Remedy: Specify Lead_width in Part data.
------------------------------
Code: 1D218112
Display:
Used by:
Cause: Lead_length_x in Part data has not been specified.
Remedy: Specify Lead_length_x in Part data.
------------------------------
Code: 1D218113
Display:
Used by:
Cause: Lead_length_y in Part data has not been specified.
Remedy: Specify Lead_length_y in Part data.
------------------------------
Code: 1D218114
Display:
Used by:
Cause: Body_size_1 (body length in the X direction) in Part data has not been specified.
Remedy: Specify Body_size_1 in Part data.
------------------------------
Code: 1D218115
Display:
Used by:
Cause: Body_size_0 (body length in the Y direction) in Part data has not been specified.
Remedy: Specify Body_size_0 in Part data.
------------------------------
Code: 1D218120
Display:
Used by:
Cause: Qty_0 (the number of leads on the left side) in Part data has not been specified.
Remedy: Specify Qty_0.
------------------------------
Code: 1D218121
Display:
第 1538 页