FUJI错误代码查询.pdf - 第1536页

Code: 1D210004 Display: Used by: Cause: Unable to find the lead. Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not stuck to the parts. ------------------------------ Code…

100%1 / 5282
------------------------------
Code: 1D204004
Display: 1D204004
Used by:
Cause: The corner of the part cannot be found.
Remedy: Check the image acquisition conditions. Check the part shape.
------------------------------
Code: 1D204005
Display: 1D204005
Used by:
Cause: The x dimension of the part is more than 20% longer than the input value.
Remedy: Check the length of the part's x dimension.
------------------------------
Code: 1D204006
Display: 1D204006
Used by:
Cause: The x dimension of the part is more than 20% shorter than the input value.
Remedy: Check the length of the part's x dimension.
------------------------------
Code: 1D204007
Display: 1D204007
Used by:
Cause: The y dimension of the part is more than 20% longer than the input value.
Remedy: Check the length of the part's y dimension.
------------------------------
Code: 1D204008
Display: 1D204008
Used by:
Cause: The y dimension of the part is more than 20% shorter than the input value.
Remedy: Check the length of the part's y dimension.
------------------------------
Code: 1D210001
Display:
Used by:
Cause: Part data is set incorrectly.
Remedy: Set Part data correctly.
------------------------------
Code: 1D210002
Display:
Used by:
Cause: There are no parts.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D210003
Display:
Used by:
Cause: Unable to find the left and right edges.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
第 1535 页
Code: 1D210004
Display:
Used by:
Cause: Unable to find the lead.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D210005
Display:
Used by:
Cause: The X direction is too long. The separation between 2 of the left/ right lead ends exceeds the
value input in Part data by over 20%.
Remedy: Check the lead width, the part shape, and the conditions under which the image is taken.
------------------------------
Code: 1D210006
Display: 1D210006
Used by:
Cause: The length in the x direction is too short.
Remedy: Check the length of the part.
------------------------------
Code: 1D210010
Display: 1D210010(CP2,3)
Used by:
Cause: The leads are too long.
Remedy: Check the lead length.
------------------------------
Code: 1D210018
Display: 1D210018(CP2,3)
Used by:
Cause: The width of the lead is more than 50% wider than the input value.
Remedy: Check the lead width.
------------------------------
Code: 1D210019
Display: 1D210019(CP2,3)
Used by:
Cause: The width of the lead is more than 50% narrower than the input value.
Remedy: Check the lead width.
------------------------------
Code: 1D214001
Display: 1D214001
Used by:
Cause: This is a part data error.
Remedy: Check that the part data is correct.
------------------------------
Code: 1D214002
Display: 1D214002
Used by:
Cause: There are no parts.
Remedy: Check the camera, the camera focus, the vision processing board and the cables. Remove any
foreign objects which may be present.
------------------------------
第 1536 页
Code: 1D214003
Display: 1D214003
Used by:
Cause: Coarse location of the part was not successful.
Remedy: Check the camera, the camera focus, the vision processing board and the cables. Remove any
foreign objects which may be present.
------------------------------
Code: 1D214004
Display: 1D214004
Used by:
Cause: The leads cannot be found.
Remedy: Check the camera, the camera focus, the vision processing board and the cables. Remove any
foreign objects which may be present.
------------------------------
Code: 1D214005
Display: 1D214005
Used by:
Cause: The x dimension of the part is more than 20% longer than the input value.
Remedy: Check the length of the part's x dimension.
------------------------------
Code: 1D214006
Display: 1D214006
Used by:
Cause: The x dimension of the part is more than 20% shorter than the input value.
Remedy: Check the length of the part's x dimension.
------------------------------
Code: 1D214010
Display: 1D214010
Used by:
Cause: The leads are too long.
Remedy: Check the lead length.
------------------------------
Code: 1D214018
Display: 1D214018
Used by:
Cause: The width of the lead is more than 50% wider than the input value.
Remedy: Check the lead width.
------------------------------
Code: 1D214019
Display: 1D214019
Used by:
Cause: The width of the lead is more than 50% narrower than the input value.
Remedy: Check the lead width.
------------------------------
Code: 1D218002
Display:
Used by:
Cause: The part was not picked. The nozzle used with this part is too large. Vision processing could not
detect any part.
Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower
the CCD level so that parts can be detected.
第 1537 页