FUJI错误代码查询.pdf - 第771页

------------------------------ Code: 12074?11 Display: "PMC?(ICM,SCU?) Error Code:********" (QP2) "NMI(PMC)" (QP2) PM?? ERROR Code:******** (QP132) Used by: QP242,QP201,QP202,QP203,QP132 Cause: NMI (a…

100%1 / 5282
Code: 12074?0B
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"CPU err (triggered pstn'g)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion CPU error response (triggered positioning).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?0C
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"CPU err (nzzl check start)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion CPU error response (nozzle check start command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?0D
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"CPU err (feeder chk start)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion CPU error response (feeder check start command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?0E
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"CPU err (changed gain)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Motion CPU error response (gain change command).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?10
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Emergency Stop(PMC)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: This reports an emergency stop from the PMC.
This is a secondary error report from a sudden stoppage cause by the opening of a safety cover or use of
the EMERGENCY STOP button.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Check the cause of the error, and use the RESET button to return to operation.
第 770 页
------------------------------
Code: 12074?11
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"NMI(PMC)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: NMI (axis common error data).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?12
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"0 Divide" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Zero division (axis common error data).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?13
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Overflow(PMC)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Overflow (axis common error data).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?14
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"INT_XX(PMC)" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: INT_XX (axis common error data).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?15
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"2-Port RAM Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: 2-port RAM interrupt error (axis common error data).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
第 771 页
Code: 12074?16
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"RAM Check Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: RAM check error (axis common error data).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?17
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"2-Port RAM Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: 2-port RAM error (axis common error data).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?18
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Total Check" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Total check (axis common error data).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Turn the PMC off and on again, then restart from zero setting.
------------------------------
Code: 12074?19
Display: "PM?? ERROR [Code:12074?19]" (value replacing "??" is module number;value replacing "?" is
module number.
PM?? ERROR Code:******** (QP132)
"Z-axis sensor error"(QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: Z-axis Sensor alarm(Discrepency in Z-axis conditions).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Ensure that the Z-axis'air cylinder as well as the raised and lowered position sensors are
operating normally.
------------------------------
Code: 12074?1A
Display: "PMC?(ICM,SCU?) Error Code:********" (QP2)
"Position NG (Z not up-end)" (QP2)
PM?? ERROR Code:******** (QP132)
"Nozzle upper limit error"(QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: There is a Z-axis position error (the Z-axis is not at the raised position).
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
第 772 页