FUJI错误代码查询.pdf - 第692页

Code: 12068C30 Display: MCHECK <mode> data error! Used by: QP3,NP2 Cause: Remedy: Check if the <mode> for the MCHECK command falls outside the 0-5 range. ------------------------------ Code: 12068C31 Display:…

Code: 12068A10

Display: Feedback position errorqeTY-axis.

Used by: QP3,NP2

Cause:

Remedy: Specify a new zero point for the TY-axis.

------------------------------

Code: 12068A11

Display: Feedback position errorqeTZ-axis.

Used by: QP3,NP2

Cause:

Remedy: Specify a new zero point for the TZ-axis.

------------------------------

Code: 12068A12

Display: Feedback position errorqeTY and TZ?axis.

Used by: QP3,NP2

Cause:

Remedy: Specify a new zero point for the TY and TZ-axis.

------------------------------

Code: 12068A13

Display: Escape Y Position out of range error.

Used by: QP3,NP2

Cause: The "Escape Y Position" value is not within the range specified by"Original Position YFW" and

"Original Position YBW".

Remedy: Correct the "Escape Y Position" in the Proper data, or remeasure the"Original Position YBW"

value.

------------------------------

Code: 12068C00

Display: MAUTO_ <operation flag> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <operation flag> for the MAUTO command has been set to a value other than 0x00

or 0x01.

------------------------------

Code: 12068C10

Display: MDEVIC <slot number> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <slot number> for the MDq惴IC command exceeds the available number of slots.

------------------------------

Code: 12068C12

Display: MDEVIC <offset> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <offset> for the MDEVIC command exceeds the travel limits for the TY-axis.

------------------------------

Code: 12068C20

Display: MREMOV <mode> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <mode> for the MREMOV command falls outside the 0-5 range.

------------------------------

第 691 页

Code: 12068C30

Display: MCHECK <mode> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <mode> for the MCHECK command falls outside the 0-5 range.

------------------------------

Code: 12068C31

Display: MCHECK <timer> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <timer> for the MCHECK command falls outside the 0-10000 range.

------------------------------

Code: 12068C40

Display: MINCHC <mode> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <mode> for the MINCH command has been set to a value other than 0 or 1.

------------------------------

Code: 12068C50

Display: MIOCNT <request content> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <request content> for the MIOCNT command has been set to a value other than 0 or

------------------------------

Code: 12068C51

Display: MICONT <interval> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <interval> for the MIOCNT command falls outside the 50-10000 range.

------------------------------

Code: 12068C60

Display: MSVCNT <interval> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <interval> for the MSVCNT command falls outside the 50-10000 range.

------------------------------

Code: 12068C61

Display: MSVCNT <Coordinate mode> data error.

Used by: QP3,NP2

Cause:

Remedy: Check whether a value other than 0 or 1 has been set for the MSVCNT <Coordinate mode>.

------------------------------

Code: 12068C70

Display: MPOSIT <operation mode> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <operation mode> for the MPOSIT command falls outside the 0-6 range.

------------------------------

Code: 12068C71

Display: MPOSIT <slot number> data error!

第 692 页

Used by: QP3,NP2

Cause:

Remedy: Check if the <slot number> for the MPOSIT command exceeds the number of available slots.

------------------------------

Code: 12068C72

Display: MPOSIT <sub-slot> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <sub-slot> for the MPOSIT command has been set to a value other than 1 or 2.

------------------------------

Code: 12068C73

Display: MPOSIT <offset> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <offset> for the MPOSIT command exceeds the travel limits for the TY-axis.

------------------------------

Code: 12068C80

Display: MPRXY1 <input method> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <input method> for the MPRXY1 command falls outside the 0-2 range.

------------------------------

Code: 12068C81

Display: MPRXY1 <slot number> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <slot number> for the MPRXY1 command falls outside the 1-10 range.

------------------------------

Code: 12068C82

Display: MPRXY1 <sub-slot number> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <sub-slot number> for the MPRXY1 command falls outside the 1-2 range.

------------------------------

Code: 12068C83

Display: MPRXY1 <axis> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <axis> for the MPRXY1 command falls outside the 0-1 range.

------------------------------

Code: 12068C84

Display: MPRXY2 <input method> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <input method> for the MPRXY2 command falls outside the 0-2 range.

------------------------------

Code: 12068C85

Display: MPRXY2 <slot number> data error!

Used by: QP3,NP2

Cause:

Remedy: Check if the <slot number> for the MPRXY2 command falls outside the 11-20 range.

第 693 页