FUJI错误代码查询.pdf - 第1215页

Cause: Failed to wait for MELF nozzle's mark image processing response. Remedy: An error occurred at ffGetSMD3InspectMelfNozzleRsp(). This is not a common error. There could be a visionsystem abnormality. Restart th…

100%1 / 5282
Display: 1CFF001A
Used by:
Cause: A waiting period time-up condition occurred for reception of the abort command.
Remedy: A "reception completed" status was not reported from the VP within the prescribed period. At
present, the VA has no wait period (unlimited wait), so this error does not occur.
This is not a common error. There could be a visionsystem abnormality. Restart the system. Obtain the
trace data and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF001B
Display: 1CFF001B
Used by:
Cause: Failed to wait for the brightness measurement response.
Remedy: An error occurred at ffGetSMD3BrightCheckRsp(). This is not a common error. There could be
a visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error
occurs multiple times.
------------------------------
Code: 1CFF001C
Display: 1CFF001C
Used by:
Cause: Failed to wait for the bad mark vision processing response.
Remedy: An error occurred at ffGetSMD3BlockSkipRsp(). This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF001D
Display: 1CFF001D
Used by:
Cause: Failed to wait for the calibration measurement response.
Remedy: An error occurred at ffGetSMD3CalCheckRsp(). This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF001E
Display: 1CFF001E
Used by:
Cause: Failed to wait for the part vision processing response.
Remedy: An error occurred at ffGetSMD3InspectDeviceRsp(). This is not a common error. There could be
a visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error
occurs multiple times.
------------------------------
Code: 1CFF001F
Display: 1CFF001F
Used by:
Cause: Failed to wait for the fiducial mark measurement response.
Remedy: An error occurred at ffGetSMD3InspectFiducialRsp(). This is not a common error. There could
be a visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error
occurs multiple times.
------------------------------
Code: 1CFF0020
Display: 1CFF0020
Used by:
第 1214 页
Cause: Failed to wait for MELF nozzle's mark image processing response.
Remedy: An error occurred at ffGetSMD3InspectMelfNozzleRsp(). This is not a common error. There
could be a visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this
error occurs multiple times.
------------------------------
Code: 1CFF0022
Display: 1CFF0022
Used by:
Cause: The video capture acquisition command failed.
Remedy: An error occurred at EdCapUlStartCapture() or at EdLsUlStartCapture(). Check for errors in the
machine data.
------------------------------
Code: 1CFF0023
Display: 1CFF0023
Used by:
Cause: Confirmation of the image acquisition results failed.
Remedy: An error occurred at EdCapUlFrameValid(). The vision processing board may be defective.
Replace the vision processing board.
------------------------------
Code: 1CFF0024
Display: 1CFF0024
Used by:
Cause: A "0" reply was received from EdCapUlCountDevice().
Remedy: The vision processing board may be disconnected. Insert the vision processing board correctly,
then restart the system.
------------------------------
Code: 1CFF0025
Display: 1CFF0025
Used by:
Cause: Failed to start the initializing process.
Remedy: Either there is no VDFInitProc.exe, or the file has been corrupted. Check these items.
------------------------------
Code: 1CFF0026
Display: 1CFF0026
Used by:
Cause: Failed to start the END process.
Remedy: Either there is no VDFDownProc.exe, or the file has been corrupted. Check these items.
------------------------------
Code: 1CFF0027
Display: 1CFF0027
Used by:
Cause: Failed to start the RTX main process.
Remedy: Either there is no VDFMainProc.rtss (or VDFMainProcQp3.rtss), or the file has been corrupted.
Check these items.
------------------------------
Code: 1CFF0028
Display: 1CFF0028
Used by:
Cause: Failed to start the NT execution process.
Remedy: Either there is no VDFNTProc.exe (or VDFNTProcQP3.exe), or the file has been corrupted. Check
these items.
第 1215 页
------------------------------
Code: 1CFF0029
Display: 1CFF0029
Used by:
Cause: An unsupported machine model was specified.
Remedy: A machine model other than NP1, NP2, CP7, or QP3 was specified when vision processing was
started. Check the "machine type" setting.
------------------------------
Code: 1CFF002A
Display: 1CFF002A
Used by:
Cause: Failed to start the RTX execution process.
Remedy: Either there is no VDFRtxProcQP3.rtss, or the file has been corrupted. Check these items.
------------------------------
Code: 1CFF002B
Display: 1CFF002B
Used by:
Cause: Cannot connect to the shared memory where the start status is saved.
Remedy: An error occurred at RtOpenSharedMemory(). This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF002C
Display: 1CFF002C
Used by:
Cause: Failed to wait for the shutter control response.
Remedy: An error occurred at ffGetShutterControlRsp(). This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF002D
Display: 1CFF002D
Used by:
Cause: The specified camera either does not exist, or it is not a CCD camera.
Remedy: A nonexistent camera ID was specified for the camera which can change the shutter speed. Or,
a line scan camera was specified.
------------------------------
Code: 1CFF002E
Display: 1CFF002E
Used by:
Cause: A waiting period time-up occurred for the "vision processing results" response from simultaneous
2-mark processing.
Remedy: The mark vision processing result was not reported from the VP within the prescribed period of
time. At present, the VA has no wait period (unlimited wait), so this error does not occur. This is not a
common error. There could be a visionsystem abnormality. Restart the system. Obtain the trace data
and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF002F
Display: 1CFF002F
Used by:
Cause: Exception processing occurred during vision processing.
第 1216 页