FUJI错误代码查询.pdf - 第2091页
Used by: Cause: The temporary file for translation could not be read. Remedy: Re-execute the function. If the error recurs, re-boot MCS. ------------------------------ Code: 2100ED1A Display: Used by: Cause: The input fi…
------------------------------
Code: 2100ED11
Display:
Used by:
Cause: The MCS/1 Part Sort table could not be opened.
Remedy: Check that the file exists.
------------------------------
Code: 2100ED12
Display:
Used by:
Cause: The printer output event could not be linked.
Remedy: Re-boot MCS.
------------------------------
Code: 2100ED13
Display:
Used by:
Cause: A stop command could not be set to the printer output event.
Remedy: Re-execute the function.
------------------------------
Code: 2100ED14
Display:
Used by:
Cause: The name of the input file has not been specified.
Remedy: Specify the name of the file.
------------------------------
Code: 2100ED15
Display:
Used by:
Cause: The name of the output file has not been specified.
Remedy: Specify the name of the file.
------------------------------
Code: 2100ED16
Display:
Used by:
Cause: The temporary file for translation could not be created.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED17
Display:
Used by:
Cause: Data could not be written to the temporary file for translation.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED18
Display:
Used by:
Cause: The temporary file for translation could not be opened.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED19
Display:
第 2090 页
Used by:
Cause: The temporary file for translation could not be read.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED1A
Display:
Used by:
Cause: The input file for translation could not be opened.
Remedy: Check the file, and then re-execute the function.
------------------------------
Code: 2100ED1B
Display:
Used by:
Cause: The input file directory for translation is not correct.
Remedy: Check the file directory with the Directory function.
------------------------------
Code: 2100ED1C
Display:
Used by:
Cause: The floppy disk drive cannot operate.
Remedy: Make sure that the floppy disk drive lock lever is fully closed.
------------------------------
Code: 2100ED1D
Display:
Used by:
Cause: The system command (Dir) could not be used.
Remedy: Re-install the OS-9.
------------------------------
Code: 2100ED1E
Display:
Used by:
Cause: A module does not exist.
Remedy: Re-install the software.
------------------------------
Code: 2100ED1F
Display:
Used by:
Cause: The temporary translate file could not copy.
Remedy: Re-execute the function. If the error recurs, re-install the software.
------------------------------
Code: 2100ED20
Display:
Used by:
Cause: The input filename is not formatted correctly.
Remedy: Input a correct filename.
------------------------------
Code: 2100ED21
Display:
Used by:
Cause: The output filename is not formatted properly.
Remedy: Correct the output filename.
第 2091 页
------------------------------
Code: 2100ED22
Display:
Used by:
Cause: The output filename must be specified in the directory.
Remedy: Correct the output filename.
------------------------------
Code: 2100ED23
Display:
Used by:
Cause: The Part data display file could not be created.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED24
Display:
Used by:
Cause: The Part data display file could not be opened.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED25
Display:
Used by:
Cause: The Part data display file could not read.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED26
Display:
Used by:
Cause: The part sort table (/D0/DATA/part) could not be found.
Remedy: Check the file.
------------------------------
Code: 2100ED27
Display:
Used by:
Cause: The part sort table (/D0/DATA/part) could not copy.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100ED50
Display:
Used by:
Cause: The start-up parameters are incorrect.
Remedy: Correct the input command if this error occurred due to a direct command.
------------------------------
Code: 2100ED51
Display:
Used by:
Cause: The MCS/1 input file does not exist.
Remedy: The Translator cannot run as the Part data object file does not exist.
------------------------------
Code: 2100ED52
Display:
第 2092 页