FUJI错误代码查询.pdf - 第182页
Remedy: Delete programs 1~9 at the machine. ------------------------------ Code: 11060005 Display: Used by: Cause: Syntax error. An unregistered command has been sent to the machine. Remedy: Press the [Reset] button. Reb…
Remedy: Check the Recovery_count setting in Status data.
------------------------------
Code: 11032002
Display:
Used by: GL2,GL5,GL541,GSP2,GSP3,GSP5,GP2,GP3,GP551,GP6,IP1,IP3
Cause: Status data's Production_report setting is out of range.
Remedy: Check the Production_report setting in Status data.
------------------------------
Code: 11032003
Display: 11032003
Used by: GSP5,GP551,GP6
Cause: The error setting in status data is inappropriate.
Remedy: Check the error setting in status data. Auto_recovery cannot be used on the GSP series.
Therefore, enable Error_stop or Error_pass and retransmit the status data to the machine.
------------------------------
Code: 11050001
Display: Program Check NG
Pallet ID is not specified (FCP651C)
Used by: CP652C
Cause: The ID of the pallet to be used in production has not been specified.
Remedy: Use the [PROGRAM] -> [DEVICE] -> [PALLET ID] command sequence at the machine to specify
the pallet ID. Edit the pallet ID table, then retransmit (FCP651C).
------------------------------
Code: 11050002
Display: 11050002
Used by: CP652C
Cause: Overlapping pallet ID numbers have been set in the pallet ID table.
Remedy: Edit the pallet ID table, then retransmit.
------------------------------
Code: 11060001
Display:
Used by:
Cause: The specified module number is less than 1
Remedy: None.
------------------------------
Code: 11060002
Display:
Used by:
Cause: The specified module number has not been transmitted.
Remedy: None.
------------------------------
Code: 11060003
Display:
Used by:
Cause: There is no empty module block
Remedy: Delete programs 1~9 at the machine.
------------------------------
Code: 11060004
Display:
Used by:
Cause: There is no empty data area
第 181 页
Remedy: Delete programs 1~9 at the machine.
------------------------------
Code: 11060005
Display:
Used by:
Cause: Syntax error. An unregistered command has been sent to the machine.
Remedy: Press the [Reset] button. Reboot MCS.
------------------------------
Code: 11060006
Display:
Used by:
Cause: There is no data name.
Remedy: None.
------------------------------
Code: 11060007
Display:
Used by:
Cause: There was a program with the same data name used previously.
Remedy: None.
------------------------------
Code: 11060008
Display:
Used by:
Cause: The program was transmitted prior to the DVH.
Remedy: Re-transmit the program.
------------------------------
Code: 11060009
Display:
Used by:
Cause: The program was transmitted prior to the DQ.
Remedy: None.
------------------------------
Code: 1106000A
Display:
Used by:
Cause: The initialize non-permission flag setting is finished.
Remedy: None.
------------------------------
Code: 1106000B
Display:
Used by:
Cause: The specified address is outside the data perimeters.
Remedy: None.
------------------------------
Code: 1106000C
Display:
Used by:
Cause: The specified ID was not transmitted.
Remedy: None.
------------------------------
Code: 1106000D
第 182 页
Display:
Used by:
Cause: The Proper transmit permission flag setting is finished.
Remedy: None.
------------------------------
Code: 1106000E
Display:
Used by:
Cause: KQ has not been received.
Remedy: None.
------------------------------
Code: 1106000F
Display:
Used by:
Cause: The line number is set outside the range 0~Z.
Remedy: None.
------------------------------
Code: 11060011
Display:
Used by:
Cause: The Proper transmit non-permission flag setting is finished.
Remedy: None.
------------------------------
Code: 11060012
Display:
Used by:
Cause: KQ has not been received.
Remedy: None.
------------------------------
Code: 11060013
Display:
Used by:
Cause: The line number is set outside the range 0~Z.
Remedy: None.
------------------------------
Code: 11060014
Display:
Used by:
Cause: The transmitted data was longer than specified.
Remedy: None.
------------------------------
Code: 11060015
Display:
Used by:
Cause: The Status transmit non-permission flag setting is finished.
Remedy: None.
------------------------------
Code: 11060016
Display:
Used by:
Cause: SQ has not been received.
第 183 页