FUJI错误代码查询.pdf - 第1575页

Display: Used by: Cause: An edge could not be detected on the upper side of the part. Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device data. --------------------------…

Used by:

Cause: A lead could not be detected on the left side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D26C1??

Display:

Used by:

Cause: A lead could not be detected on the lower side of the part. The two final digits indicate the lead

number.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D26C2??

Display:

Used by:

Cause: A lead could not be detected on the right side of the part. The two final digits indicate the lead

number.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D26C3??

Display:

Used by:

Cause: A lead could not be detected on the upper side of the part. The two final digits indicate the lead

number.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D26C4??

Display:

Used by:

Cause: An edge could not be detected on the left side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D26C5??

Display:

Used by:

Cause: An edge could not be detected on the lower side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D26C6??

Display:

Used by:

Cause: An edge could not be detected on the right side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D26C7??

第 1574 页

Display:

Used by:

Cause: An edge could not be detected on the upper side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D26D000

Display:

Used by:

Cause: The part pickup slippage was too large (X direction).

Remedy: Check how the parts are being supplied.

------------------------------

Code: 1D26D080

Display:

Used by:

Cause: The part pickup slippage was too large (Y direction).

Remedy: Check how the parts are being supplied.

------------------------------

Code: 1D26E???

Display:

Used by:

Cause: The image in vision processing is not correct so operation was canceled.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D26F???

Display:

Used by:

Cause: There was a logical error in the management program.

Remedy: Check Part data.

------------------------------

Code: 1D290002

Display: Same as code.

Used by:

Cause: The machine failed to pick up a part. The nozzle being used is too large for the part. The part

cannot be identified in the vision processing image.

Remedy: Supply the part. If this error occurs even though a part has been picked up, use a smaller

nozzle for the part. Reduce the CCD level so that the part image becomes visible.

------------------------------

Code: 1D298002

Display: Same as code.

Used by:

Cause: The machine failed to pick up a part. The nozzle being used is to large for the part. The part

cannot be identified in the vision processing image.

Remedy: Supply the part. If this error occurs even though a part has been picked up, use a smaller

nozzle for the part. Reduce the CCD level so that the part image becomes visible.

------------------------------

Code: 1D298100

Display: Same as code.

Used by:

Cause: This Computer Vision No. is not supported.

第 1575 页

Remedy: Check the Computer Vision No. setting in the Part data.

------------------------------

Code: 1D298110

Display: Same as code

Used by:

Cause: No value has been set for the "Lead_pitch" parameter in the Part data.

Remedy: Set a value for the "Lead_pitch" parameter.

------------------------------

Code: 1D298111

Display: Same as code

Used by:

Cause: No value has been set for the "Lead_width" parameter in the Part data.

Remedy: Set a value for the "Lead_width" parameter.

------------------------------

Code: 1D298112

Display: Same as code

Used by:

Cause: No value has been set for the "Lead_length_x" parameter (the length of leads in the X direction) in

the Part data.

Remedy: Set a value for the "Lead_length_x" parameter.

------------------------------

Code: 1D298113

Display: Same as code

Used by:

Cause: No value has been set for the "Lead_length_y" parameter (the length of leads in the Y direction) in

the Part data.

Remedy: Set a value for the "Lead_length_y" parameter.

------------------------------

Code: 1D298114

Display: Same as code

Used by:

Cause: No value has been set for the "Body_size 1" parameter (the body length in the X direction) in the

Part data.

Remedy: Set a value for the "Body_size 1" parameter.

------------------------------

Code: 1D298115

Display: Same as code

Used by:

Cause: No value has been set for the "Body_size 0" parameter (the body length in the X direction) in the

Part data.

Remedy: Set a value for the "Body_size 0" parameter.

------------------------------

Code: 1D298120

Display: Same as code

Used by:

Cause: No value has been set for the "Qty 0" parameter (the quantity of leads on the left side) in the Part

data.

Remedy: Set a value for the "Qty 0" parameter.

------------------------------

Code: 1D298121

Display: Same as code

第 1576 页