FUJI错误代码查询.pdf - 第2075页

Used by: Cause: The system monitor could not be started up. Remedy: Re-boot MCS. ------------------------------ Code: 2100E50F Display: RS-232C memory allocation error Used by: Cause: Sufficient memory area could not be …

100%1 / 5282
------------------------------
Code: 2100E506
Display: active drive disk not found
Used by:
Cause: The active disk is not stored in the environment variables file.
Remedy: Set the active disk in the environment variables file.
------------------------------
Code: 2100E507
Display: printer stop error
Used by:
Cause: The printer output could not be stopped. (Ctrl + X)
Remedy: Re-boot MCS.
------------------------------
Code: 2100E508
Display: RS-232C event link error
Used by:
Cause: An RS-232C event could not be linked.
Remedy: Re-boot MCS.
------------------------------
Code: 2100E509
Display: RS-232C event post error
Used by:
Cause: An RS-232C event could not be posted.
Remedy: Re-boot MCS.
------------------------------
Code: 2100E50A
Display: Line descriptor load error
Used by:
Cause: The Line Descriptor could not be loaded.
Remedy: Check the line descriptor.
------------------------------
Code: 2100E50B
Display: pipe cannot occupy
Used by:
Cause: The named pipe for the production monitor could not be occupied.
Remedy: Re-execute the function after waiting a while.
------------------------------
Code: 2100E50C
Display: Print file create error
Used by:
Cause: The print output file could not be created.
Remedy: Re-boot MCS.
------------------------------
Code: 2100E50D
Display: Printer output error
Used by:
Cause: Printer output is not possible.
Remedy: Check the printer cable connector, and check that the machine is in on-line mode.
------------------------------
Code: 2100E50E
Display: system monitor start error
第 2074 页
Used by:
Cause: The system monitor could not be started up.
Remedy: Re-boot MCS.
------------------------------
Code: 2100E50F
Display: RS-232C memory allocation error
Used by:
Cause: Sufficient memory area could not be allocated to test all the RS-232C ports.
Remedy: Re-boot MCS.
------------------------------
Code: 2100E510
Display: loop-back test request pipe create error
Used by:
Cause: The request pipe to test all the RS-232C ports could not be created.
Remedy: Re-boot MCS.
------------------------------
Code: 2100E511
Display: prod monitor write pipe open error
Used by:
Cause: The write pipe for the production monitor could not be opened.
Remedy: Re-boot MCS.
------------------------------
Code: 2100E512
Display: prod monitor read pipe open error
Used by:
Cause: The read pipe for the production monitor could not be opened.
Remedy: Re-boot MCS.
------------------------------
Code: 2100E513
Display: prod monitor pipe write error
Used by:
Cause: Data could not be written to the production monitor pipe.
Remedy: Re-boot MCS.
------------------------------
Code: 2100E514
Display: prod monitor pipe read error
Used by:
Cause: The production monitor pipe could not be read.
Remedy: Re-boot MCS.
------------------------------
Code: 2100E515
Display: 'LQ' data transmit error
Used by:
Cause: The LQ signal could not be transmitted.
Remedy: Re-boot MCS. If the error recurs, re-boot MCS. If the error continues to recur, re-install the
software.
------------------------------
Code: 2100E516
Display: 'LA' data receive error
Used by:
Cause: The LA signal could not be received within the fixed time.
第 2075 页
Remedy: Check that the machine is turned on. Check the settings on the line descriptor.
------------------------------
Code: 2100E517
Display: 'LA' signal read error
Used by:
Cause: The LA signal could not be read.
Remedy: Re-boot MCS. If the error recurs, re-boot MCS. If the error continues to recur, re-install the
software.
------------------------------
Code: 2100E518
Display: main terminal semaphore link error
Used by:
Cause: The main terminal semaphore link could not be made.
Remedy: Re-boot MCS.
------------------------------
Code: 2100E519
Display: subl terminal semaphore link error
Used by:
Cause: The sub-terminal semaphore link could not be made.
Remedy: Re-boot MCS.
------------------------------
Code: 2100E51A
Display: strings scan error
Used by:
Cause: A string could not be referenced.
Remedy: Re-boot MCS. If the error recurs, re-install the software.
------------------------------
Code: 2100E51B
Display: install list read error
Used by:
Cause: The install list could not be read.
Remedy: Re-install the software.
------------------------------
Code: 2100E51C
Display: illegal install list format
Used by:
Cause: The install list contained a syntax error.
Remedy: Re-install the software.
------------------------------
Code: 2100E51D
Display: command module open error
Used by:
Cause: The command module could not be opened.
Remedy: Re-install the software.
------------------------------
Code: 2100E51E
Display: command module load error
Used by:
Cause: The command module could not be loaded.
Remedy: Re-install the software.
------------------------------
第 2076 页