FUJI错误代码查询.pdf - 第2003页
Display: Proper Data receive transmission error Used by: Cause: A file related to receiving the Proper Data could not be opened. Remedy: Use the directory function in the file services menu to check the file. -----------…
Code: 2100A219
Display: status data open error
Used by:
Cause: A file related to the Status data could not be opened.
Remedy: Re-boot MCS. If the error continues to occur, re-install the system.
------------------------------
Code: 2100A21A
Display: stat descriptor open error
Used by:
Cause: A file required to transmit the Status data could not be opened.
Remedy: Re-boot MCS. If the error continues to occur, re-install the system.
------------------------------
Code: 2100A21B
Display: transmit program open error
Used by:
Cause: A production program could not be opened for transmission.
Remedy: Use the directory function in the file services menu to check the file.
------------------------------
Code: 2100A21C
Display: transmit descriptor open error
Used by:
Cause: A file required to transmit the production programs could not be opened.
Remedy: Re-boot MCS. If the error continues to occur, re-install the system.
------------------------------
Code: 2100A21D
Display: packt transmit error
Used by:
Cause: The transmit packet could not be written (vQ, dQ, dF, dVH, dVF, dVN, dVD, etc.).
Remedy: Re-execute the function. If the error recurs, re-install the system.
------------------------------
Code: 2100A21E
Display: transmit error
Used by:
Cause: During transmission an error was made by the machine.
Remedy: Select the [Ctrl] and [E] keys from the UCI menu to get a display of errors. Refer to the errors
from the machine for more details.
------------------------------
Code: 2100A21F
Display: /pipe/transmit_prcs time over
Used by:
Cause: The machine did not respond within the fixed time.
Remedy: Make sure that the machine is switched on and operating. Also, check the line descriptor. If the
error still occurs, perform the communication in Off_line mode.
------------------------------
Code: 2100A220
Display: proc filename open error
Used by:
Cause: A file related to the Proper Data could not be opened.
Remedy: Use the directory function in the file services menu to check the file.
------------------------------
Code: 2100A221
第 2002 页
Display: Proper Data receive transmission error
Used by:
Cause: A file related to receiving the Proper Data could not be opened.
Remedy: Use the directory function in the file services menu to check the file.
------------------------------
Code: 2100A223
Display: pck fork error
Used by:
Cause: The program checker cannot operate.
Remedy: Re-execute the function. If the error still occurs, re-install the system.
------------------------------
Code: 2100A224
Display: stat. tmp file open error
Used by:
Cause: The temporary Status file could not be opened.
Remedy: Re-execute the function. If the error still occurs, re-install the system.
------------------------------
Code: 2100A225
Display: SVX error
Used by:
Cause: Check information error.
Remedy: Refer to the error information on the machine. Refer to error codes 1102**** for details on these
codes.
------------------------------
Code: 2100A226
Display: machine name error
Used by:
Cause: In HOST's start-up format, an incorrect or illegal machine name was input.
Remedy: Re-check the HOST start-up format.
------------------------------
Code: 2100A227
Display: File already exist error
Used by:
Cause: A file with the same name as the file specified as the transmission destination file already exists.
Remedy: Set the Overwrite Mode to YES and run the Transmit command again.
------------------------------
Code: 2100A228
Display: M/C filename full error
Used by:
Cause: The free machine memory space is insufficient to store the transmitted program.
Remedy: Delete one or more unnecessary production programs from the machine memory and transmit
the program again.
------------------------------
Code: 2100A229
Display: M/C filename foreground error
Used by:
Cause: Foreground transmission cannot be carried out while the machine is operating.
Remedy: Stop the machine operation and transmit the program again.
------------------------------
Code: 2100A22A
Display: Justify error
第 2003 页
Used by:
Cause: The program check has discovered that there is at least one error in the program.
Remedy: Check the program.
------------------------------
Code: 2100A22B
Display: Machine type mismatch
Used by:
Cause: The specified machine types do not match.
Remedy: Check the transmission file (Program, Proper) machine types and compare them with the
machine types.
------------------------------
Code: 2100A22C
Display: not nickname
Used by:
Cause: There was no line nickname found.
Remedy: Check the line descriptor.
------------------------------
Code: 2100A22D
Display: DTX750B error
Used by:
Cause: There is no transmit descriptor.
Remedy: Re-execute the function. If the error continues to occur, re-install the system.
------------------------------
Code: 2100A22E
Display: DTX7511 error
Used by:
Cause: The program for which a download request was issued could not be opened.
Remedy: The requested program does not exist in MCS. Use the error file directory to check the file.
------------------------------
Code: 2100A22F
Display: DTX7514 error
Used by:
Cause: The machine type is wrong.
Remedy: Check the transmission file (Program, Proper) machine types and compare them with the
previously transmitted machine types.
------------------------------
Code: 2100A230
Display: DTX7515 error
Used by:
Cause: The program check discovered an error in the requested program.
Remedy: Request the program again. Check that there are no errors in the program.
------------------------------
Code: 2100A231
Display: transmit error
Used by:
Cause: Unable to read the description at the transmission descriptor.
Remedy: Re-execute the function. If the error still occurs, re-install the system.
------------------------------
Code: 2100A232
Display: NO Module create error
Used by:
第 2004 页