FUJI错误代码查询.pdf - 第2186页
Code: 51??0031 Display: No "UNIT', "STRUCT". Used by: Cause: There is no "UNIT", "STRUCT" in the specified file. "UNIT", "STRUCT" is necessary at the head of th…
perform the operation again.
------------------------------
Code: 51??0023
Display: File does not exist.
Used by:
Cause: The specified file does not exist.
Remedy: Check the specified file name. Alternatively copy or create the file in the directory.
------------------------------
Code: 51??0024
Display: File in exclusive hold.
Used by:
Cause: The specified file is being used exclusively.
Remedy: Wait until exclusive use of the file has ended and then re-execute the command.
------------------------------
Code: 51??0025
Display: File is not held.
Used by:
Cause: The specified file is not held or it has already been released.
Remedy: Check the setting made for the "release" file name.
------------------------------
Code: 51??0026
Display: File hold time-out error has occurred.
Used by:
Cause: The specified file is being used exclusively and a time-out error occurred while waiting to acquire
it.
Remedy: Wait until exclusive use of the file has ended and then re-execute the command.
------------------------------
Code: 51??0027
Display: File cannot be accessed.
Used by:
Cause: Accessing the specified file is not permitted.
Remedy:
------------------------------
Code: 51??0028
Display: File cannot be opened.
Used by:
Cause: The specified file cannot be opened.
Remedy:
------------------------------
Code: 51??0029
Display: File cannot be read.
Used by:
Cause: An error occurred when the specified file was read. This is believed to be an I/O error.
Remedy:
------------------------------
Code: 51??0030
Display: File cannot be written to.
Used by:
Cause: An error occurred when the specified file was written to. This is believed to be an I/O error.
Remedy:
------------------------------
第 2185 页
Code: 51??0031
Display: No "UNIT', "STRUCT".
Used by:
Cause: There is no "UNIT", "STRUCT" in the specified file. "UNIT", "STRUCT" is necessary at the head of
the file.
Remedy: Input "UNIT", "STRUCT" in the relevant file.
------------------------------
Code: 51??0032
Display: "UNIT", "STRUCT' entry is incorrect.
Used by:
Cause: The content of "UNIT", "STRUCT" in the specified file is incorrect.
Remedy: Check that "BLOCK", "HEADER-" is in "UNIT", "STRUCT" and that the entry for "FILETYPE",
"FILESTRUCT" is correct.
------------------------------
Code: 51??0033
Display: No entry for "FILETYPE".
Used by:
Cause: There is no entry for "FILETYPE" in the specified production program's "UNIT", "STRUCT" -
"BLOCK", "HEADER-".
Remedy: "FILETYPE" is a mandatory item.
------------------------------
Code: 51??0034
Display: No entry for "FILESTRUCT".
Used by:
Cause: There is no entry for "FILESTRUCT" in the specified production program's "UNIT", "STRUCT" -
""BLOCK", 'HEADER-".
Remedy: "FILESTRUCT" is a mandatory item.
------------------------------
Code: 51??0035
Display: Transmission image data file.
Used by:
Cause: The specified production program, partial data, Proper data and status data files are transmission
image format files.
Remedy:
------------------------------
Code: 51??0036
Display: Specified file for different machine type.
Used by:
Cause: The data in the specified file is for a different machine type. For Proper data, the machine type
specified at "MCTYPE" is checked.
Remedy: Specify the correct file or check the file's machine-type definition.
------------------------------
Code: 51??0037
Display: Machine type not defined in specified file.
Used by:
Cause: The machine type is not specified in the header data of the specified file.
Remedy: Enter the "MCTYPE" item.
------------------------------
Code: 51??0038
Display: Name not defined in specified file.
Used by:
第 2186 页
Cause: The name is not specified in the header information of the specified file. The name for a
transmission image format production program is taken to be the same as the program name.
Remedy: Input the "NAME" item.
------------------------------
Code: 51??0039
Display: Too many part data entries.
Used by:
Cause: There are too many part data unit entries in the specified production program. This error occurs
when the production program and part data are in one file and the part data unit entries which are not
referred to exceed a fixed limit.
Remedy: Delete unused part data.
------------------------------
Code: 51??0040
Display: Image data transmission revision is different.
Used by:
Cause: The specified production program is a transmission image data file but the transmission data
revision entered in the program does not match the present machine transmission revision. For this
reason the specified production program cannot be downloaded.
Remedy: A transmission image format production program can only be downloaded if the machine's
transmission revision at the time the image format file was created and the present transmission revision
are the same.
------------------------------
Code: 51??0041
Display: Image data program name is different.
Used by:
Cause: The specified partial data is a transmission image data file, but the program name recorded in the
program does not agree with the program name specified in the command line. For this reason the
specified partial data cannot be downloaded.
Remedy: Transmission image format partial data can only be downloaded to the same program as
specified at the time of image format file creation.
------------------------------
Code: 51??0050
Display: Information reported from default check/file existence check.
Used by:
Cause: Information from the default check/file existence check has been reported. This is output as
supplementary information.
Remedy: Following the supplementary information, edit the files as necessary.
------------------------------
Code: 51??0051
Display: Not production program data.
Used by:
Cause: The specified file is not a production program.
Remedy: Check the "FILETYPE" and "FILESTRUCT" settings in "UNIT", "STRUCT" - "BLOCK", "HEADER-"
in the specified file.
------------------------------
Code: 51??0052
Display: Not Proper data.
Used by:
Cause: The specified file is not Proper data.
Remedy: Check the "FILETYPE" and "FILESTRUCT" settings in "UNIT", "STRUCT" - "BLOCK", "HEADER-"
in the specified file.
第 2187 页