FUJI错误代码查询.pdf - 第2255页
Used by: Cause: This is an unknown block. Remedy: Generally this is caused by an error in another block's name. Check the reported block name. ------------------------------ Code: 51??5113 Display: Unnecessary block…
------------------------------
Code: 51??5006
Display: Same line multiply defined in multiple item data.
Used by:
Cause: In multiple item data, a line with the same number has been multiply defined. When
downloading, the first of the data lines is taken as being the valid data line.
Remedy: Check the data line settings.
------------------------------
Code: 51??5010
Display: Values for size defining items are incorrect or they have been omitted.
Used by:
Cause: The entries for the items "DEV_NUM", "EL_NUM" or "TRAY_NUM" in "UNIT", "PROGRAM" -
"BLOCK", "HEADER" for SMD3 compatible machines have either been omitted or they are incorrect.
Correct values are reported together with the item names. Unnecessary items are not reported to the
applicable machine. When downloading, the program size is calculated using the registered values.
However, if values which exceed the maximum permissible are entered, they are changed to the maximum
and the program size is calculated.
Remedy: Check the entries for the relevant items in "UNIT", "PROGRAM" - "BLOCK", "HEADER-" in the
production program.
------------------------------
Code: 51??5100
Display: Meaningless unit.
Used by:
Cause: Although this entry is not correct it is ignored when the program is downloaded. This error may
occur in the following cases. A unit name other than "UNIT", "MARK" or "UNIT", "NOZZLE" is entered prior
to "UNIT", "PROGRAM". A unit name other than "UNIT", "PARTS" is entered prior to "UNIT", "PROGRAM".
Remedy: Check the entries for the production program.
------------------------------
Code: 51??5101
Display: Unused "UNIT", "PARTS".
Used by:
Cause: "UNIT", "PARTS" is entered in the production program but it is not used and not referred to in the
device line.
Remedy: When the number of entries for unused "UNIT", "PARTS" is high, an error may occur when
downloading.
------------------------------
Code: 51??5110
Display: Block description is omitted.
Used by:
Cause: There is no "BLOCK" line for the block being reported. When downloading, the data for the
applicable block takes its default values.
Remedy: Check the block settings. If necessary, input the "BLOCK" line.
------------------------------
Code: 51??5111
Display: Block is multiply defined.
Used by:
Cause: The "BLOCK" line for the block being reported is multiply defined.
Remedy: Check the block settings.
------------------------------
Code: 51??5112
Display: Unknown block.
第 2254 页
Used by:
Cause: This is an unknown block.
Remedy: Generally this is caused by an error in another block's name. Check the reported block name.
------------------------------
Code: 51??5113
Display: Unnecessary block for this machine type.
Used by:
Cause: This block is not used in the corresponding machine type and is therefore unnecessary. This
report is made if the machine type has no device lines and "BLOCK", "DEVICE+" in "UNIT", "PROGRAM" is
input. This report is made if the machine type has no sequence lines
and"BLOCK","SEQUENCE+"in"UNIT","PROGRAM"is input. This report is made if the machine type has not
GSS data lines and"BLOCK","SOLDER"or"BLOCK","SOLCO"in"UNIT","PROGRAM"is input.
Remedy:
------------------------------
Code: 51??5114
Display: Unnecessary block.
Used by:
Cause: There is a "BLOCK" in device data which is not referred to from sequence data. This report is
made if "BLOCK", "DEVICE+" is input for a production program in which there are no entries in the device
line in sequence data.
Remedy:
------------------------------
Code: 51??5120
Display: Unused GSS data element.
Used by:
Cause: This error is reported if there is an element in GSS data which is not referenced from the
sequence data and is,therefore,unnecessary.
Remedy:
------------------------------
Code: 52??0000
Display: Normal ending or normal start.
Used by:
Cause: The command was completed normally or started normally (when using immediate return mode).
Remedy:
------------------------------
Code: 52??0001
Display: Command format error.
Used by:
Cause: One of the following mistakes has been made in the format of the command. Either the
subcommand name is incorrect, the number of arguments is incorrect or an invalid argument has been
specified as the option argument.
Remedy: Check that there are no mistakes in the command format.
------------------------------
Code: 52??0002
Display: Nickname error.
Used by:
Cause: The nickname is incorrect.
Remedy: Check the specified nickname.
------------------------------
Code: 52??0003
Display: Either the file name or path name is too long.
第 2255 页
Used by:
Cause: File names may be up to 23 characters and path names may be up to 127 characters.
Remedy: Check the specified file and path names.
------------------------------
Code: 52??0004
Display: The file name is incorrect.
Used by:
Cause: The specified file name is incorrect.
Remedy: Check the specified file name.
------------------------------
Code: 52??0005
Display: Machine not supported.
Used by:
Cause: Either the machine type or the command is not supported.
Remedy: Check the specified nickname and machine type.
------------------------------
Code: 52??0006
Display: Revision not supported.
Used by:
Cause: The revision cannot be supported by the machine or a mistake has been made in specifying the
revision.
Remedy: Check how the revision was specified.
------------------------------
Code: 52??0007
Display: Specified revision does not exist.
Used by:
Cause: This revision does not exist in the machine.
Remedy:
------------------------------
Code: 52??0008
Display: Specified job number is out of range.
Used by:
Cause: The job number specified in the command line is incorrect.
Remedy: Check the specified job number.
------------------------------
Code: 52??0009
Display: Specified job does not exist.
Used by:
Cause: The job specified by the nickname and job number does not exist.
Remedy:
------------------------------
Code: 52??0010
Display: Partial data setting is incorrect.
Used by:
Cause: There is an error in the partial data setting specified in the command line.
Remedy: Check the partial data setting.
------------------------------
Code: 52??0011
Display: Read level setting is incorrect.
Used by:
Cause: There is an error in the read level setting specified in the command line.
第 2256 页