FUJI错误代码查询.pdf - 第1394页
------------------------------ Code: 1D0F0002 Display: Used by: Cause: The part cannot be found. Remedy: Check the part feeding system. ------------------------------ Code: 1D0F4001 Display: Used by: Cause: The part boun…
------------------------------
Code: 1D0EC6??
Display:
Used by:
Cause: An edge could not be detected on the right side of the part.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D0EC7??
Display:
Used by:
Cause: An edge could not be detected on the upper side of the part.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D0ED000
Display:
Used by:
Cause: The part pickup slippage was too large (X direction).
Remedy: Check how the parts are being supplied.
------------------------------
Code: 1D0ED080
Display:
Used by:
Cause: The part pickup slippage was too large (Y direction).
Remedy: Check how the parts are being supplied.
------------------------------
Code: 1D0EE???
Display:
Used by:
Cause: The image in vision processing is not correct so operation was canceled.
Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device
data.
------------------------------
Code: 1D0EF???
Display:
Used by:
Cause: There was a logical error in the management program.
Remedy: Check Part data.
------------------------------
Code: 1D0EF100
Display:
Used by:
Cause: The part boundaries cannot be detected.
Remedy: Check the part size, and check the image taken by vision processing.
------------------------------
Code: 1D0EF300
Display:
Used by:
Cause: The part boundaries cannot be detected.
Remedy: Check the part size, and check the image taken by vision processing.
第 1393 页
------------------------------
Code: 1D0F0002
Display:
Used by:
Cause: The part cannot be found.
Remedy: Check the part feeding system.
------------------------------
Code: 1D0F4001
Display:
Used by:
Cause: The part boundaries cannot be detected.
Remedy: Check the part shape, and check the image taken by vision processing.
------------------------------
Code: 1D0F4003
Display:
Used by:
Cause: The image is not set (the nozzle is dirty or there is foreign matter on the parts), the part is mis-
shaped (the edges are uneven), and there is a large discrepancy between the part and the values set in
Part data.
Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.
------------------------------
Code: 1D0F4005
Display:
Used by:
Cause: The X length of the body is more than 15% larger than the value in Part data.
Remedy: The nozzle is dirty, there is foreign matter on the parts, or the wrong parts are being used.
------------------------------
Code: 1D0F4006
Display:
Used by:
Cause: The part is tilted too much.
Remedy: Check the way the part is picked. Check the image taken by vision processing.
------------------------------
Code: 1D0F4007
Display:
Used by:
Cause: The part cannot be found.
Remedy: Check the part feeding system.
------------------------------
Code: 1D0F4008
Display:
Used by:
Cause: In the upper or lower area in Part data there are fewer than 2 leads.
Remedy: When using Vision #15 each area must have 2 or more leads. Use an appropriate vision number.
------------------------------
Code: 1D0F4009
Display:
Used by:
Cause: The part boundaries cannot be detected.
Remedy: Check the part size, and check the image taken by vision processing.
------------------------------
第 1394 页
Code: 1D0F400A
Display:
Used by:
Cause: The part boundaries cannot be detected.
Remedy: Check the part size, and check the image taken by vision processing.
------------------------------
Code: 1D0F400B
Display:
Used by:
Cause: The initial lead could not be found.
Remedy: Check the lead width, part feeding orientation and vision processing system.
------------------------------
Code: 1D0F400C
Display:
Used by:
Cause: The first lead could not be found in each area.
Remedy: Check the lead width, the orientation of the parts as they are fed into the machine and check
that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0F400D
Display:
Used by:
Cause: The lead pitch is too wide and/or the lead width is too wide.
Remedy: Check the part.
------------------------------
Code: 1D0F400E
Display:
Used by:
Cause: A missing or broken lead was encountered during vision processing.
Remedy: Check the lead pitch and the orientation of the part.
------------------------------
Code: 1D0F400F
Display:
Used by:
Cause: The lead pitch exceeds the permissible range.
Remedy: Check the shape of the part.
------------------------------
Code: 1D0F4010
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0F4011
Display:
Used by:
Cause: The part boundary could not be found.
Remedy: Check the part shape and check that the vision processing system is taking the image correctly.
------------------------------
Code: 1D0F4012
Display:
第 1395 页