FUJI错误代码查询.pdf - 第893页

Code: 1220004D Display: HOME sensor error. Used by: Cause: The HOME sensor is detected at the wrong timing in the homing. Remedy: The noise may be mixed in the HOME sensor input terminal. Please check the dirt of a HOME …

100%1 / 5282
------------------------------
Code: 12200045
Display: The magnetic pole detection failure.
Used by:
Cause: The execution of the Detected Magnet Pole is timeout.
Remedy: Check to ensure that the linear motor axis is no interference or that the axis movement is not
impeded.
------------------------------
Code: 12200046
Display: Program error.
Used by:
Cause: The specified function is effective only with the linear motor.
Remedy: There is possibility that version up isn't correct.Reinstall the recovery media software.
------------------------------
Code: 12200047
Display: The magnetic pole detection failure.
Used by:
Cause: It has executed magnetic pole detection.
Remedy: There is possibility that version up isn't correct.Reinstall the recovery media software.
------------------------------
Code: 12200048
Display: Program error.
Used by:
Cause: An indicated axis is registered on the other operation control at present.
Remedy: There is possibility that version up isn't correct.Reinstall the recovery media software.
------------------------------
Code: 12200049
Display: System error.
Used by:
Cause: The fault which it is impossible to recover occurs.
Remedy: This error is impossible to detect.
There is possibility that version up isn't correct.Reinstall the recovery media software.
------------------------------
Code: 1220004A
Display: Coordinate motion error.
Used by:
Cause: The draw time of the specified diagram is too long.
Remedy: Check the diagram information.If no abnormalities are found, and get a trace file.
------------------------------
Code: 1220004B
Display: Profile error.
Used by:
Cause: The profile could not be made as specified.
Remedy: Check to ensure that there is no interference or that the axis movement is not impeded.
------------------------------
Code: 1220004C
Display: Coordinate motion error.
Used by:
Cause: The coodinate motion of the specified handle isn't declarative in the use.
Remedy: There is possibility that version up isn't correct.Reinstall the recovery media software.
------------------------------
第 892 页
Code: 1220004D
Display: HOME sensor error.
Used by:
Cause: The HOME sensor is detected at the wrong timing in the homing.
Remedy: The noise may be mixed in the HOME sensor input terminal.
Please check the dirt of a HOME sensor light input part,
Please check that poor connection has not occurred between the SERVO board (amplifier) and a
HOME sensor.
------------------------------
Code: 12200050
Display: Board error.
Used by:
Cause: The servo board set in the servo initialization file is not supported.
Remedy: Check the setting in the servo initialization file, and that the servo control board is correct.
If no abnormalities are found, the board could be damaged.
------------------------------
Code: 12200051
Display: Failed to create object.
Used by:
Cause: Failed to create a servo object.
Remedy: Reinstall the software because the initial installation could have failed.
If this error is not corrected, the servo control board could be damaged.
------------------------------
Code: 12200052
Display: Abnormal ADC number.
Used by:
Cause: The ADC number setting does not exist.
Remedy: Check the value in the servo initialization file.
If no abnormalities are found, reinstall the software.
------------------------------
Code: 12200053
Display: Axis number is outside the valid range.
Used by:
Cause: An invalid value has been set in the parameter's argument (axis number).
Remedy: Reinstall the software because the initial installation could have failed.
------------------------------
Code: 12200054
Display: Board number is outside the valid range.
Used by:
Cause: The setting for the servo controller board number is incorrect.
Remedy: Reinstall the software because the initial installation could have failed.
------------------------------
Code: 12200055
Display: Acceleration time is outside the valid range.
Used by:
Cause: The acceleration time setting is outside the valid range.
Remedy: Reinstall the software because the initial installation could have failed.
------------------------------
Code: 12200056
Display: Deceleration time is outside the valid range.
Used by:
第 893 页
Cause: The deceleration time setting is outside the valid range.
Remedy: Reinstall the software because the initial installation could have failed.
------------------------------
Code: 12200057
Display: Jerk ratio is outside the valid range.
Used by:
Cause: The jerk ratio setting is outside the valid range (1-100).
Remedy: Reinstall the software because the initial installation could have failed.
------------------------------
Code: 12200058
Display: Position is outside the valid range.
Used by:
Cause: The position parameter setting is outside the valid range.
Remedy: Reinstall the software because the initial installation could have failed.
------------------------------
Code: 12200059
Display: Abnormal GAIN-INDEX.
Used by:
Cause: The GAIN-INDEX setting (Moving, Settling, ...)is invalid.
Remedy: Reinstall the software because the initial installation could have failed.
------------------------------
Code: 1220005a
Display: Abnormal GAIN table number.
Used by:
Cause: The GAIN table number setting is invalid.
Remedy: Reinstall the software because the initial installation could have failed.
------------------------------
Code: 1220005b
Display: Speed is outside the valid range.
Used by:
Cause: The traveling speed setting is outside the valid range.
Remedy: Reinstall the software because the initial installation could have failed.
------------------------------
Code: 1220005c
Display: Axis number is outside the valid range.
Used by:
Cause: Unable to reference the gain table as the specified axis number is invalid.
Remedy: Reinstall the software because the initial installation could have failed.
------------------------------
Code: 1220005d
Display: No parameter.
Used by:
Cause: A parameter is not set in the GAIN table ID.
Remedy: Reinstall the software because the initial installation could have failed.
------------------------------
Code: 1220005e
Display: Previous goal position is not set.
Used by:
Cause: The movement operation cannot be performed because the previous goal position is not set so it
cannot be referenced.
Remedy: Reinstall the software because the initial installation could have failed.
第 894 页