FUJI错误代码查询.pdf - 第510页

------------------------------ Code: 12050304 Display: "Servo alarm: X-axis overtravel" (CP4,CP6) "Servo alarm: Y-axis overtravel" (CP43) Used by: CP4-1,CP4-2,CP4-3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP64…

------------------------------

Code: 1205020B

Display: 搅拌风扇警告

Used by: GPX,NXTP

Cause: 搅拌风扇异常。这样的话，因无法搅拌，系统有可能过热死机。

Remedy: 请更换搅拌风扇的马达。

------------------------------

Code: 1205020C

Display: 逆变器异常

Used by: NXTP

Cause: [真空泵单元] 逆变器发生异常。

Remedy: 为了重新启动逆变器,请重新启动机器。

即使重新启动也不能解除异常时，请更换逆变器。

------------------------------

Code: 1205020D

Display: 电路板真空泵逆变器异常

Used by: NXTP,GPX,GPX-C

Cause: [真空泵单元] 电路板真空泵的逆变器发生异常。

Remedy: 为了重新启动逆变器,请重新启动机器。

即使重新启动也不能解除异常时，请更换逆变器。若机器不对应电路板真空泵单元则无法使用真空夹紧功能。请将设定

变更为不使用真空夹紧。

------------------------------

Code: 1205020E

Display: 钢板真空压力低下

Used by: NXTP

Cause: 版对准时检测到钢板真空漏气。

Remedy: 请确认钢板和主平台的结合面是否存在异物。

------------------------------

Code: 12050301

Display: Overtravel NG ?? (IP, IP2, GL, GSP) CHECK ?-OT (FCP)

Used by: CP3,GL2,GL5,GL541,GSP2,GSP3,GSP5,IP1,IP2,IP3,GPX-C

Cause: The overtravel sensor indicated by ? has been activated.

Remedy: Move the axis out of the overtravel area, either manually or through inching.

------------------------------

Code: 12050302

Display: "Overtravel [-|+][X |Y |S |Z |SSD ]" "Servo alarm: D-axis overtravel" (CP4)

Used by: CP4-1,CP4-2,GSP5,GP2,GP3,GP551,GP6,NP132,NP133

Cause: The axis named in the display has overtraveled in the indicated direction. The D-axis has

overtraveled.(CP4)

Remedy: Move the indicated axis either by inching or manually to cancel the overtravel. Inch the D-axis to

cancel the overtravel.(CP4)

------------------------------

Code: 12050303

Display: "Servo alarm: X-axis overtravel" (CP43)

Used by: CP4-3

Cause: The X-axis has overtraveled.

Remedy: Inch the X-axis to cancel the overtravel.

第 509 页

------------------------------

Code: 12050304

Display: "Servo alarm: X-axis overtravel" (CP4,CP6) "Servo alarm: Y-axis overtravel" (CP43)

Used by: CP4-1,CP4-2,CP4-3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GSP5

Cause: The X-axis has overtraveled. The Y-axis has overtraveled.(CP43)

Remedy: Inch the X-axis to cancel the overtravel. Inch the Y-axis to cancel the overtravel.(CP43)

------------------------------

Code: 12050305

Display: "Servo alarm: Y-axis overtravel" (CP4,CP6) "Servo alarm: Z-axis overtravel" (CP43)

Used by: CP4-1,CP4-2,CP4-3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GSP5

Cause: The Y-axis has overtraveled. The Z-axis has overtraveled.(CP43)

Remedy: Inch the Y-axis to cancel the overtravel. Inch the Z-axis to cancel the overtravel.(CP43)

------------------------------

Code: 12050306

Display: "Servo alarm: Z-axis overtravel" (CP4,CP6) "Servo alarm: D1-axis overtravel" (CP43)

Used by: CP4-3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GSP5

Cause: The Z-axis has overtraveled. The D1-axis has overtraveled.(CP43)

Remedy: Inch the Z-axis to cancel the overtravel. Inch the D1-axis to cancel the overtravel.(CP43)

------------------------------

Code: 12050307

Display: "Servo alarm: D1-axis overtravel" (CP4,CP6) "Servo alarm: D2-axis overtravel" (CP43) "Servo

alarm: DF-axis overtravel" (CP652C)

Used by: CP4-3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GSP5

Cause: The D1-axis has overtraveled. The D2-axis has overtraveled.(CP43) The DF-axis has

overtraveled.(CP652C)

Remedy: Inch the D1-axis to cancel the overtravel.Inch the D2-axis to cancel the overtravel.(CP43) Inch

the DF-axis to cancel the overtravel.(CP652C)

------------------------------

Code: 12050308

Display: "Servo alarm: D2-axis overtravel" (CP6) "Servo alarm: DR-axis overtravel" (CP652C)

Used by: CP5,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: The D2-axis has overtraveled. The DR-axis has overtraveled.(CP652C)

Remedy: Inch the D2-axis to cancel the overtravel. Inch the DR-axis to cancel the overtravel.(CP652C)

------------------------------

Code: 12050309

Display: Servo error SS-axis:Over travel

Used by: QP132

Cause: The SS-axis is in overtravel.

Remedy: Correct the position of the SS-axis using the inching keys.

------------------------------

Code: 1205030A

Display: Servo error MX-axis:Over travel

Used by: QP132

Cause: The MX-axis is in overtravel.

Remedy: Correct the position of the MX-axis using the inching keys.

------------------------------

Code: 1205030B

Display: Servo error MY-axis:Over travel

Used by: QP132

Cause: The MY-axis is in overtravel.

Remedy: Correct the position of the MY-axis using the inching keys.

第 510 页

------------------------------

Code: 1205030C

Display: Servo error PO-axis:Over travel

Used by: QP132

Cause: The PO-axis is in overtravel.

Remedy: Correct the position of the PO-axis using the inching keys.

------------------------------

Code: 1205030D

Display: Y-axis collision!

Used by: NP2,QP3

Cause: The Y-axis collision sensor has been triggered. There is interference between the Y1 and Y2

axis.(NP2,QP3)

Remedy: Use the inching keys to clear the interference.(NP2,QP3)

------------------------------

Code: 1205030E

Display: 往复臂 O.T.异常

Used by: NXTP

Cause: 往复臂的移动目标值为范围外，从属搬运轨道越过超程传感器。

Remedy: 请向前侧移动，解除传感器。

------------------------------

Code: 1205031?

Display: Servo Ararm ? axis. Overtravel. (CP6)

Used by:

Cause: Overtravel error at the ? axis.

Remedy: Use inching to clear the overtravel condition.

------------------------------

Code: 12050311

Display: 伺服报错超程

Used by: GPX-C

Cause: 显示位置上发生超程现象。

Remedy: 请使用微操作或手操作解除超程现象。

------------------------------

Code: 12050401

Display: 内存备份不良 Memory Backup NG (IP,IP2,GSP)

Used by: GPX,IP, IP2, GSP,NXTP

Cause: 有效的Proper和Status没有被传输。

Remedy: 请传输Proper和Status。此时，在传输Proper和Status后，暂时关闭电源然后重新接通。（有可能伺服的

动作不正常)在每次接通电源后发生时，请检查备份用的电池。进行了复位后也会显示该错误。

------------------------------

Code: 12050402

Display: "Data Transmission Line NG" (IP, GL), "Transmiterr" (CP3)

Used by: GL2

Cause: The machine cannot transmit data to the MCS-16. The memory buffer has become full due to a

failure in communication with the MCS-16.

Remedy: Check the communication cable. Make sure the MCS-16 is not hung up.

------------------------------

Code: 12050403

Display: MFU1 (2) is not ready

Used by: IP2

第 511 页