FUJI错误代码查询.pdf - 第1904页

Cause: The output filename is too long. Remedy: Shorten it to 23 characters or less. ------------------------------ Code: 21006091 Display: Nozzle information file name get error Used by: Cause: An error occurred when th…

100%1 / 5282
Used by:
Cause: The specified file is not a source program.
Remedy: Check the source program.
------------------------------
Code: 21006082
Display: Manual Line Balancer Std_file create error
Used by:
Cause: The preparation file for the separator's manual line balancer could not be created.
Remedy: Check that the write protect setting is not on. Also, check that the hard disk has sufficient
memory.
------------------------------
Code: 21006083
Display: Manual Line Balancer Std_file write error
Used by:
Cause: The preparation file for the separator's manual line balancer could not be written to.
Remedy: Check that the write protect setting is not on. Also, check that the hard disk has sufficient
memory.
------------------------------
Code: 21006084
Display: Manual Line Balancer fork error
Used by:
Cause: The manual line balancer could not be started.
Remedy: Re-execute the function. If it still doesn't work, re-install the software.
------------------------------
Code: 21006085
Display: Manual Line Balancer Std_file open error
Used by:
Cause: The separator's preparation file used by the manual line balancer could not be opened.
Remedy: Check the Std file.
------------------------------
Code: 21006086
Display: Manual Line Balancer Std_file read error
Used by:
Cause: The separator's preparation file used by the manual line balancer could not be read.
Remedy: Check the file.
------------------------------
Code: 21006087
Display: Part_data create error on ram_disk
Used by:
Cause: The necessary Part data could not be created on the RAM disk.
Remedy: Check that the RAM disk has sufficient memory. If it doesn't, re-boot MCS.
------------------------------
Code: 21006088
Display: Part_data write error on ram_disk
Used by:
Cause: The Part data could not be written to the RAM disk.
Remedy: Check that the RAM disk has sufficient memory. If it doesn't, re-boot MCS.
------------------------------
Code: 21006089
Display: Output filename is to long
Used by:
第 1903 页
Cause: The output filename is too long.
Remedy: Shorten it to 23 characters or less.
------------------------------
Code: 21006091
Display: Nozzle information file name get error
Used by:
Cause: An error occurred when the nozzle information filename was read from the environment file.
Remedy: Use the text editor to delete the nozzle information filename from the environment file.
------------------------------
Code: 21006092
Display: Tray information file name get error
Used by:
Cause: An error occurred when the tray information filename was read from the environment file.
Remedy: Use the text editor to delete the tray information filename from the environment file.
------------------------------
Code: 21006093
Display: Nozzle information name is too long
Used by:
Cause: The nozzle information filename is too long.
Remedy: Amend the filename so that it is 23 characters or less.
------------------------------
Code: 21006094
Display: Tray information name is too long
Used by:
Cause: The tray information filename is too long.
Remedy: Amend the filename so that it is 23 characters or less.
------------------------------
Code: 21006095
Display: Nozzle information file not found <%s.%s.nz>
Used by:
Cause: The nozzle information file was not found.
Remedy: Specify a nozzle information file that exists.
------------------------------
Code: 21006096
Display: Tray information file not found <%s.%s.tr>
Used by:
Cause: The tray information file was not found.
Remedy: Specify a tray information file that exists.
------------------------------
Code: 21006097
Display: Nozzle information file not input
Used by:
Cause: Nozzle information file not input.
Remedy: Input a nozzle information file and reexecute.
------------------------------
Code: 21006098
Display: Tray information file not input
Used by:
Cause: Tray information file not input.
Remedy: Input a tray information file and reexecute.
------------------------------
第 1904 页
Code: 21006099
Display: Nozzle information table memory allocation error
Used by:
Cause: The nozzle information table memory could not be allocated correctly.
Remedy: Reboot MCS.
------------------------------
Code: 2100609A
Display: Tray information table memory allocation error
Used by:
Cause: The tray information table memory could not be allocated correctly.
Remedy: Reboot MCS.
------------------------------
Code: 2100609B
Display: Nozzle information file open error
Used by:
Cause: The nozzle information file could not be opened.
Remedy: Try opening a file that exists.
------------------------------
Code: 2100609C
Display: Tray information file open error
Used by:
Cause: The tray information file could not be opened.
Remedy: Try opening a file that exists.
------------------------------
Code: 2100609D
Display: Nozzle information file read error
Used by:
Cause: The nozzle information file could not be read.
Remedy: Fix the file using the editor.
------------------------------
Code: 2100609E
Display: Tray information file read error
Used by:
Cause: The tray information file could not be read.
Remedy: Fix the file using the editor.
------------------------------
Code: 2100609F
Display: Nozzle information file type missmatch
Used by:
Cause: Nozzle information file type is mismatched.
Remedy: Specify the nozzle information in the nozzle information file.
------------------------------
Code: 210060A0
Display: Tray information file type missmatch
Used by:
Cause: Tray information file type is mismatched.
Remedy: Specify the tray information in the tray information file.
------------------------------
Code: 210060A1
Display: Machine fip3 arranged check error
Used by:
第 1905 页