FUJI错误代码查询.pdf - 第1177页

Cause: Calibration was already being carried out. Remedy: If this error occurs often, contact Fuji. ------------------------------ Code: 1C410004 Display: Used by: Cause: A logical error occurred. This error code may occ…

Cause: The camera Proper data has not been set. Camera Proper data has not undergone training. A

section of the mark training data has been overwritten. Use the SAVE command to make a copy of the

hard disk and use this to see whether there has been corrupted data.

Remedy: Re-measure the camera Proper data. Change the data which is different at the terminal. If

booting up from the ROM card, the part of the system which is overwritten will not start.

------------------------------

Code: 1C310011

Display:

Used by:

Cause: During calibration, a contradiction occurred. There is a contradiction with the Proper data being

used. When there are many programs in the machine, and these programs use different nozzle sizes or

cameras but the Part data files bear the same name, these file GDDUs are downloaded and saved. When

using the relevant device description, the machine will only use the last file downloaded. Therefore, when

production starts, the wide field camera is being used when the data calls for a narrow field camera, or

vice versa, and this error occurs. Alternately, if the nozzle sizes differ, error 1C410011 occurs.

Remedy: This error generally does not occur. Delete all programs from the machine and transmit only

that program which is needed.

------------------------------

Code: 1C310013

Display:

Used by:

Cause: During calibration, a movement command contradiction occurred.

Remedy: If this error occurs often, contact Fuji.

------------------------------

Code: 1C310015

Display:

Used by:

Cause: During calibration, a movement command contradiction occurred.

Remedy: If this error occurs often, contact Fuji.

------------------------------

Code: 1C310016

Display:

Used by:

Cause: During calibration, a movement command contradiction occurred.

Remedy: If this error occurs often, contact Fuji.

------------------------------

Code: 1C310017

Display:

Used by:

Cause: During calibration, a movement command contradiction occurred.

Remedy: If this error occurs often, contact Fuji.

------------------------------

Code: 1C310018

Display:

Used by:

Cause: During calibration, a movement command contradiction occurred.

Remedy: If this error occurs often, contact Fuji.

------------------------------

Code: 1C310019

Display:

Used by:

第 1176 页

Cause: Calibration was already being carried out.

Remedy: If this error occurs often, contact Fuji.

------------------------------

Code: 1C410004

Display:

Used by:

Cause: A logical error occurred. This error code may occur during device training or inspection.

Remedy: If this error occurs often, contact Fuji and be prepared to give as many details as possible.

------------------------------

Code: 1C410100

Display:

Used by:

Cause: There is no element. There is no description of the element in the device description. This error

may occur during device training.

Remedy: Check the device description. Enter a correct element description.

When using GDG, check the contents of Part data.

PD. computer_vision_no

PD. direction

PD. body_size_x,y

PD. lead_length_x,y

PD. lead_pitch

PD. lead_width

PD. lead_quality_0_3

PD. lead_information

------------------------------

Code: 1C410101

Display:

Used by:

Cause: Device segments have no edges that can be inspected. This error may occur during device

training.

Remedy: Check the device description. Enter a correct edge description.

When using e1-e4 polarity GDG, check the contents of Part data.

PD. computer_vision_no

PD. direction

PD. body_size_x,y

PD. lead_length_x,y

PD. lead_pitch

PD. lead_width

PD. lead_information

------------------------------

Code: 1C410102

Display:

Used by:

Cause: There is a mistake in the segment ID.

Remedy: Check the segment ID in the device description. Enter a correct segment ID description. When

using GDG, check the contents of of Part data.

PD. computer_vision_no

PD. direction

PD. body_size_x,y

PD. lead_length_x,y

PD. lead_pitch

第 1177 页

PD. lead_width

PD. lead_quality_0_3

PD. lead_information

------------------------------

Code: 1C410103

Display:

Used by:

Cause: The placement flag has not been set. This error may occur during device training.

Remedy: Check the device description placement flag. Enter a correct placement flag. This value is

generally set at 15.

------------------------------

Code: 1C410104

Display:

Used by:

Cause: There are too many pickup errors. Either the lead tip edge or the body edge is not perpendicular

to both lead side edges. This error can occur during device inspection.

Remedy: Set smaller tolerance settings (total tolerance x, total tolerance y, rotation tolerance) at the

device description. The lead edge and body edge must have a tolerance of within 90 deg +-7 deg.. Check

the part shape. For parts such as 1608 parts, if the nozzle protrudes from the corner of the part, this

error can also occur.

------------------------------

Code: 1C410105

Display:

Used by:

Cause: The coarse edge is inappropriate.

Remedy: Check the device description's coarse edge.

Enter a correct coarse edge.

PD. computer_vision_no

PD. direction

PD. body_size_x,y

PD. lead_length_x,y

PD. lead_pitch

PD. lead_width

PD. lead_quality_0_3

PD. lead_information

------------------------------

Code: 1C410106

Display:

Used by:

Cause: The nozzle being used is larger than the nozzle size entered. When there are many programs in

the machine, and these programs use different nozzle sizes or cameras but the Part data files bear the

same name, these file GDDU are downloaded and saved. When using the relevant device description, the

machine will only use the last file downloaded. Therefore, when production starts, the wide field camera is

being used when the data calls for a narrow field camera, or vice versa, and error 1C31011 occurs.

Alternately, if the nozzle sizes differ, error 1C410006 occurs.

Remedy: Choose a smaller nozzle size. Check the following nozzle sizes in Part data: If the camera,

nozzle size or backlight size was changed, create a new Part data file with a different name.

PD Nozzle_size_CP4

PD Nozzle_size_Max

------------------------------

Code: 1C410107

第 1178 页