FUJI错误代码查询.pdf - 第905页

Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor- Shell could be damaged. ------------------------------ Code: 1220300E Display: Axis error Used by: Cause: The axis be…

100%1 / 5282
Cause: The Syntax error occurred in the stepping motor controller.
Remedy: Replace stepping motor controller board with a new one if this error is not corrected after reboot,
because the controller board could be damaged.
------------------------------
Code: 12203004
Display: Link error
Used by:
Cause: The link communication error occurred in the stepping motor controller.
Remedy: The cause is possible that the noise from outside or
that the power has been turned on and off during communication.
Reboot the machine.
------------------------------
Code: 12203005
Display: Check sum error
Used by:
Cause: The Check sum error occurred in the stepping motor controller.
Remedy: Replace stepping motor controller board with a new one if this error is not corrected after reboot,
because the controller board could be damaged.
------------------------------
Code: 12203006
Display: Break signal error
Used by:
Cause: The stepping motor shell received the break signal.
Remedy: Replace stepping motor controller board with a new one if this error is not corrected after reboot,
because the controller board could be damaged.
------------------------------
Code: 1220300A
Display: Multiple open
Used by:
Cause: The Stepping-Motor-Shell been already opened.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 1220300B
Display: Port error
Used by:
Cause: The Stepping-Motor-Shell is not still opend.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 1220300C
Display: Initialize error
Used by:
Cause: Initialization of the shell did not end within a prescribed time.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 1220300D
Display: Timeout
Used by:
Cause: There is no response from a controller after transmitting a command.
第 904 页
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 1220300E
Display: Axis error
Used by:
Cause: The axis been already opened.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 1220300F
Display: Axis error
Used by:
Cause: The axis is not still opened.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203010
Display: Axis error
Used by:
Cause: The axis is not still initialize.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203011
Display: DLL open error
Used by:
Cause: Failed to open DLL.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203012
Display: COM port error
Used by:
Cause: Failed to open COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203013
Display: COM port error
Used by:
Cause: Failed to initialize COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203014
Display: COM port error
Used by:
Cause: Failed to a setting of time-out interval of COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
第 905 页
------------------------------
Code: 12203015
Display: COM port error
Used by:
Cause: Failed to write to COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203016
Display: COM port error
Used by:
Cause: Failed to read from COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203017
Display: COM port error
Used by:
Cause: Failed to terminate COM port.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
Code: 12203018
Display: Response code error
Used by:
Cause: The stepping motor controller has returned the code
which is not ACK or NAK.
Remedy: Replace stepping motor controller with a new one if this error is not corrected after reboot,
because the controller could be damaged.
------------------------------
Code: 12203019
Display: Response data error
Used by:
Cause: The stepping-motor-shell has not received data correctly.
Remedy: Replace stepping motor controller board with a new one if this error is not corrected after reboot,
because the controller board could be damaged.
------------------------------
Code: 1220301A
Display: Response error
Used by:
Cause: There is no response from the stepping motor controller.
Remedy: Replace stepping motor controller board with a new one if this error is not corrected after reboot,
because the controller board could be damaged.
------------------------------
Code: 1220301B
Display: Que error
Used by:
Cause: The number of que which stores a command became the maximum.
Remedy: Reinstall software if this error cannot be corrected after reboot, because the Stepping-Motor-
Shell could be damaged.
------------------------------
第 906 页