FUJI错误代码查询.pdf - 第1993页

Remedy: Check the filename. ------------------------------ Code: 21009010 Display: not specify check file name Used by: Cause: The file to be checked was not specified in background startup. Remedy: If the error occurred…

100%1 / 5282
Display: can't fork Expand task
Used by:
Cause: The expander task could not be started up.
Remedy: Re-execute the function. If the error recurs, re-install the software.
------------------------------
Code: 21009008
Display: can't fork Program check task
Used by:
Cause: The production program checker could not be started up.
Remedy: Re-execute the function. If the error recurs, re-install the software.
------------------------------
Code: 21009009
Display: can't fork Proper check task
Used by:
Cause: The Proper Data checker could not be started up.
Remedy: Re-execute the function. If the error recurs, re-install the software.
------------------------------
Code: 2100900A
Display: can't fork Status check task
Used by:
Cause: The Status Data checker could not be started up.
Remedy: Re-execute the function. If the error recurs, re-install the software.
------------------------------
Code: 2100900B
Display: can't fork Ls task
Used by:
Cause: The directory could not be started up.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100900C
Display: can't create Ls task pipe
Used by:
Cause: The named pipe for the directory could not be created.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100900D
Display: can't read Ls task pipe
Used by:
Cause: The named pipe for the directory could not be read.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100900E
Display: Ls task error
Used by:
Cause: No error complete or file name returned from directory.
Remedy: Re-execute the function. If the error recurs, re-install the software.
------------------------------
Code: 2100900F
Display: not found check file on disk
Used by:
Cause: The check file was not found.
第 1992 页
Remedy: Check the filename.
------------------------------
Code: 21009010
Display: not specify check file name
Used by:
Cause: The file to be checked was not specified in background startup.
Remedy: If the error occurred due to a direct command, input the command correctly.
------------------------------
Code: 21009011
Display: compress data load memory error (expand)
Used by:
Cause: A compressed file to be expanded could not be loaded.
Remedy: Check the filename.
------------------------------
Code: 21009012
Display: file desc data load memory error (expand)
Used by:
Cause: The File Descriptor could not be loaded.
Remedy: Re-install the software.
------------------------------
Code: 21009013
Display: can't open compressed file
Used by:
Cause: A compressed file could not be opened.
Remedy: The file can be partitioned. Check this at the editor.
------------------------------
Code: 21009014
Display: can't get compressed file size
Used by:
Cause: The size of a compressed file could not be determined.
Remedy: The file can be partitioned. Check this at the editor.
------------------------------
Code: 21009015
Display: can't open output file
Used by:
Cause: The expander output file could not be opened.
Remedy: Check the available RAM memory. If there is not enough, re-boot MCS.
------------------------------
Code: 21009016
Display: can't write compress data
Used by:
Cause: The compressed data could not be written to the file.
Remedy: Check the available RAM memory. If there is not enough, re-boot MCS.
------------------------------
Code: 21009017
Display: expand data allocation error
Used by:
Cause: Sufficient memory area could not be allocated to expand the file.
Remedy: Re-boot MCS.
------------------------------
Code: 21009018
第 1993 页
Display: can't rewrite expand file
Used by:
Cause: The expander cannot write data to a file which already contains expanded data.
Remedy: Check that the file write protect setting is not on.
------------------------------
Code: 21009019
Display: Expander file create error
Used by:
Cause: The file for the Expander output data could not be created.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100901A
Display: specify check file no program
Used by:
Cause: The specified file is not a production program file.
Remedy: Input the correct file name.
------------------------------
Code: 2100901B
Display: specify check file no proper
Used by:
Cause: The specified file is not a Proper Data file.
Remedy: Input the correct file name.
------------------------------
Code: 2100901C
Display: specify check file no status
Used by:
Cause: The specified file is not a Status Data file.
Remedy: Input the correct file name.
------------------------------
Code: 2100901D
Display: '+' option not found
Used by:
Cause: The '+' option was not specified at start-up.
Remedy: If the error occurred during a direct command, check the command option.
------------------------------
Code: 2100901E
Display: over range data of expand program
Used by:
Cause: After the data is expanded, a sequence data X or Y value exceeds the permitted range (-65000 to
65000).
Remedy: Correct the X or Y value in the sequence data.
------------------------------
Code: 2100901F
Display: Block 0 placing sequence present
Used by:
Cause: A placing sequence exists for Block 0.
Remedy: Correct the B data in the sequence. This is a warning message only.
------------------------------
Code: 21009020
Display: Sequence data not found
Used by:
第 1994 页