FUJI错误代码查询.pdf - 第1859页

compatible versions. ------------------------------ Code: 21002001 Display: in_out path change error Used by: Cause: Unable to change the input path. Remedy: Re-boot the system. ------------------------------ Code: 21002…

100%1 / 5282
Cause: One of the following errors exists in the specified PTN file (GSP5 pattern file). The specified PTN
file does not exist or the specified file name is the directory name.
Remedy: Check the PTN file. Specify the correct file name, and resume operation.
------------------------------
Code: 21001C02
Display: Program file not found
Used by:
Cause: The specified production program name is not the name of the production program file.
Remedy: Check the production program name. Specify the correct file name and resume operation.
------------------------------
Code: 21001C03
Display: PTN file not found
Used by:
Cause: The specified PTN file (GSP5 pattern file) is not the name of the PTN file.
Remedy: Check the PTN file name. Specify the correct file name and resume operation.
------------------------------
Code: 21001C04
Display: Machine type mismatch
Used by:
Cause: The machine type for the production program and the PTN file (GSP5 pattern file) are not the
same. It is necessary for the machine type in the production program in use at the time of PTN conversion
and the machine type in the PTN file to be the same.
Remedy: Check the production program and PTN file. Choose the same machine type and resume
operation.
------------------------------
Code: 21001C05
Display: File read error
Used by:
Cause: A file read error occurred during the conversion process. It is possible that the specified
production program or the PTN file has been corrupted. It is also possible that the disk itself is damaged.
Remedy: Check the specified production program and PTN file (GSP5 pattern file) by using the MCS2
editor. Use the DCHECK command in the status display (accessed by simultaneously pressing the control
button and "G" at the UCI screen) to check if there is any problem with the hard disk or floppy disk.
------------------------------
Code: 21001C06
Display: File descriptor not found (Program)
Used by:
Cause: There is no file descriptor for the specified production program or it has been corrupted.
Remedy: Re-install the system.
------------------------------
Code: 21001C07
Display: File descripter not found (PTN)
Used by:
Cause: There is no file descriptor for the specified PTN file (GSP5 pattern file) or it has been corrupted.
Remedy: Re-install the system.
------------------------------
Code: 21002000
Display: Illigal parameter
Used by:
Cause: The start-up format is incorrect.
Remedy: Check the version numbers on the system and the GD editor. If they are not compatible, install
第 1858 页
compatible versions.
------------------------------
Code: 21002001
Display: in_out path change error
Used by:
Cause: Unable to change the input path.
Remedy: Re-boot the system.
------------------------------
Code: 21002002
Display: Message file set error
Used by:
Cause: Unable to set the message file.
Remedy: Re-boot the system. If the problem recurs re-install the system.
------------------------------
Code: 21002003
Display: CRT event link error
Used by:
Cause: Unable to link the CRT event.
Remedy: Re-boot the system.
------------------------------
Code: 21002004
Display: PD file open error
Used by:
Cause: Unable to open the Part data file.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002005
Display: PD file header read error
Used by:
Cause: Unable to read the Part data header.
Remedy: If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002006
Display: No support parts type
Used by:
Cause: The part type is unsupported.
Remedy: Check the Part data computer vision number.
------------------------------
Code: 21002007
Display: PD file not found
Used by:
Cause: There is no Part data file.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002008
Display: Parts vision data read error
Used by:
Cause: There was a vision data read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002009
第 1859 页
Display: Parts side & appearance data read error
Used by:
Cause: There was a parts side and appearance data read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 2100200A
Display: PD file offset table read error
Used by:
Cause: There was a Part data file offset table read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 2100200B
Display: This device no elements
Used by:
Cause: This device has no elements.
Remedy: Check the Part data clearance.
------------------------------
Code: 2100200C
Display: GD file create error
Used by:
Cause: There was a GD file create error.
Remedy: Check the Part data overwrite setting, and check the available memory on the hard disk.
------------------------------
Code: 2100200D
Display: GD file write error
Used by:
Cause: There was a GD file write error.
Remedy: Check the Part data overwrite setting, and check the available memory on the hard disk.
------------------------------
Code: 2100200E
Display: TOO large nozzle diameter
Used by:
Cause: The nozzle diameter is too large.
Remedy: Check the nozzle diameter settings in Part data.
------------------------------
Code: 2100200F
Display: GD file protect error
Used by:
Cause: The file created at the GD editor could not automatically create GDs. When creating GDs cancel
the write protect function at the GD editor.
Remedy: When creating GDs cancel the write protect function at the GD editor.
------------------------------
Code: 21002010
Display: Parts carry data read error
Used by:
Cause: There was a carrying data read error.
Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.
------------------------------
Code: 21002011
Display: Parts tolerance information data read error
Used by:
第 1860 页