FUJI错误代码查询.pdf - 第1338页

Remedy: Check how the parts are being supplied. ------------------------------ Code: 1D0AD080 Display: Used by: Cause: The part pickup slippage was too large (Y direction). Remedy: Check how the parts are being supplied.…

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D0AC2??

Display:

Used by:

Cause: A lead could not be detected on the right side of the part. The two final digits indicate the lead

number.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D0AC3??

Display:

Used by:

Cause: A lead could not be detected on the upper side of the part. The two final digits indicate the lead

number.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D0AC4??

Display:

Used by:

Cause: An edge could not be detected on the left side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D0AC5??

Display:

Used by:

Cause: An edge could not be detected on the lower side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D0AC6??

Display:

Used by:

Cause: An edge could not be detected on the right side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D0AC7??

Display:

Used by:

Cause: An edge could not be detected on the upper side of the part.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D0AD000

Display:

Used by:

Cause: The part pickup slippage was too large (X direction).

第 1337 页

Remedy: Check how the parts are being supplied.

------------------------------

Code: 1D0AD080

Display:

Used by:

Cause: The part pickup slippage was too large (Y direction).

Remedy: Check how the parts are being supplied.

------------------------------

Code: 1D0AE???

Display:

Used by:

Cause: The image in vision processing is not correct so operation was canceled.

Remedy: Check the part. Check the direction of part supply. Check the entries in Part data and Device

data.

------------------------------

Code: 1D0AF???

Display:

Used by:

Cause: There was a logical error in the management program.

Remedy: Check Part data.

------------------------------

Code: 1D0B0001

Display:

Used by:

Cause: The value of the Part data Direction item is not between 0 and 3.

Remedy: Check the value of the Part data Direction item.

------------------------------

Code: 1D0B0002

Display:

Used by:

Cause: The part could not be found.

Remedy: Check the conditions under which the part is being fed.

------------------------------

Code: 1D0B0003

Display:

Used by:

Cause: The value of the Part data Direction item is not between 0 and 3.

Remedy: Check the value of the Part data Direction item.

------------------------------

Code: 1D0B0004

Display:

Used by:

Cause: A correct image could not be taken. The lead or a related item is defective. Alternately, one or

more of the values entered in Part data (PDG) (such as Lead length or Pitch) are wrong and therefore vision

processing cannot be carried out.

Remedy: Check that the nozzle is not dirty, that foreign matter is not stuck to the part and that the

correct part was picked.

------------------------------

Code: 1D0B0005

Display:

Used by:

第 1338 页

Cause: The length in the Y direction is too long.