FUJI错误代码查询.pdf - 第1901页

Remedy: This is a warning. It is not an error message. Processing continues. ------------------------------ Code: 21006071 Display: file already exists Used by: Cause: The file to be created already exists. Remedy: Check…

100%1 / 5282
Used by:
Cause: The separator's reason file could not be opened.
Remedy: Check that the file exists, and check that the write protect setting is not on.
------------------------------
Code: 21006069
Display: reason file print out error
Used by:
Cause: The separator's reason file could not be printed out.
Remedy: Re-execute the function. If it still doesn't work, re-boot MCS.
------------------------------
Code: 2100606A
Display: reason file read error
Used by:
Cause: The separator's reason file could not be read.
Remedy: Check that the file exists, and check that the write protect setting is not on.
------------------------------
Code: 2100606B
Display: parameter file open error
Used by:
Cause: The separator's parameter status file could not be opened.
Remedy: The file does not exist. Pull a new file from the editor.
------------------------------
Code: 2100606C
Display: illegal parameter file
Used by:
Cause: The separator's parameter status file is illegal.
Remedy: Re-install the automatic programming software.
------------------------------
Code: 2100606D
Display: parameter file open error
Used by:
Cause: The separator's parameter status file could not be opened.
Remedy: The file does not exist. Pull a new file from the editor.
------------------------------
Code: 2100606E
Display: PT file not found <**.**.pt>
Used by:
Cause: Either a processing line in the permanent set table or an entire machine's PT file was not found.
Remedy: This is a warning message. Continue operation when questioned by the machine.
------------------------------
Code: 2100606F
Display: cartridge empty
Used by:
Cause: The feeder specified in the special conditions file was already used. Details are written to the
UN_sep file.
Remedy: Check the contents of the special condition file.
------------------------------
Code: 21006070
Display: no separation
Used by:
Cause: A condition which prohibits separation has been set in the special conditions file.
第 1900 页
Remedy: This is a warning. It is not an error message. Processing continues.
------------------------------
Code: 21006071
Display: file already exists
Used by:
Cause: The file to be created already exists.
Remedy: Check the file process.
------------------------------
Code: 21006072
Display: Illegal sub type (FIP1/FIP2)
Used by:
Cause: The machine sub-type name is illegal.
Remedy: Check the machine sub-type (specified line descriptor, Part data, etc.).
------------------------------
Code: 21006073
Display: GSP2 sequence file create error
Used by:
Cause: The GSP sequence file could not be created.
Remedy: Check the source program.
------------------------------
Code: 21006074
Display: GSP2 sequence file open error
Used by:
Cause: The GSP sequence file could not be opened.
Remedy: Check that the file exists, and check that the write protect setting is not on. Also, check that
there is enough memory remaining in the hard disk.
------------------------------
Code: 21006075
Display: GSP2 sequence file read error
Used by:
Cause: The GSP sequence file cannot be read.
Remedy: Delete the separator file and re-execute the function.
------------------------------
Code: 21006076
Display: GSP2 sequence file write error
Used by:
Cause: The GSP2 sequence file cannot be written to.
Remedy: Check that the file exists, and check that the write protect setting is not on. Also, check that the
hard disk has sufficient memory.
------------------------------
Code: 21006077
Display: special sequence ('F','M') are wanting in source file.
Used by:
Cause: The special sequence (F or M) is missing from the source program.
Remedy: Append the missing sequences to the source program.
------------------------------
Code: 21006078
Display: Special condition file not found
Used by:
Cause: The specified special condition file does not exist.
Remedy: Check the special condition file.
第 1901 页
------------------------------
Code: 21006079
Display: Special condition file open error
Used by:
Cause: The special condition file could not be opened.
Remedy: Check the specified special condition file.
------------------------------
Code: 2100607A
Display: Special condition file read error.
Used by:
Cause: The special condition file could not be read.
Remedy: Check the specified special condition file.
------------------------------
Code: 2100607B
Display: Input special condition file isn't special codition file_typ
Used by:
Cause: The specified file is not a special condition file.
Remedy: Check the special condition files.
------------------------------
Code: 2100607C
Display: /h0/USER/ATP/Sep_parameter isn't Parameter status file_type
Used by:
Cause: The specified file is not the special conditions file type.
Remedy: Check the special condition file.
------------------------------
Code: 2100607D
Display: rewrite switch get error
Used by:
Cause: The rewrite switch could not read.
Remedy: Re-install the automatic programming software.
------------------------------
Code: 2100607E
Display: Input Off-line file isn't Off-line file_type
Used by:
Cause: The specified file is not part of the line descriptor.
Remedy: Check the line descriptor.
------------------------------
Code: 2100607F
Display: Input Pt-file isn't Pt-file_type
Used by:
Cause: The specified file is not a PT file.
Remedy: Check the PT files.
------------------------------
Code: 21006080
Display: Pt-file (***) isn't Pt-file_type
Used by:
Cause: The specified file is not a PT file.
Remedy: Check the PT files.
------------------------------
Code: 21006081
Display: Input Source program isn't Source_program_type
第 1902 页