FUJI错误代码查询.pdf - 第205页
Display: Used by: Cause: Tray pickup point change indicator T number error. Remedy: Enter the correct T number for the correct tray. ------------------------------ Code: 1107BF08 Display: Used by: Cause: Tray pickup poin…
Code: 1107A?72
Display: abolished
Used by: QP122
Cause: abolished
Remedy: abolished
------------------------------
Code: 1107A?7A
Display: abolished
Used by: QP122
Cause: abolished
Remedy: abolished
------------------------------
Code: 1107A?7C
Display: abolished
Used by: QP122
Cause: abolished
Remedy: abolished
------------------------------
Code: 1107A?7D
Display: abolished
Used by: QP122
Cause: abolished
Remedy: abolished
------------------------------
Code: 1107B100
Display: An error device was reported.
Used by:
Cause: Verifier reported that a feeder for which the error status has not yet been cleared still exists on
the device table.
Remedy: Check the error status of the feeder at the device check panel. Perform verification as normal
using the Handy Terminal or reregister the FIDL and DID association data to clear the error status.
------------------------------
Code: 1107BF01
Display:
Used by:
Cause: Version numbers do not match.
Remedy: None.
------------------------------
Code: 1107BF05
Display:
Used by:
Cause: Syntax check error.
Remedy: An error occurred during communication. Re-establish communication.
------------------------------
Code: 1107BF06
Display:
Used by:
Cause: Positioning D number error.
Remedy: This is an inching axis range error. Input a correct inching axis number.
------------------------------
Code: 1107BF07
第 204 页
Display:
Used by:
Cause: Tray pickup point change indicator T number error.
Remedy: Enter the correct T number for the correct tray.
------------------------------
Code: 1107BF08
Display:
Used by:
Cause: Tray pickup point change indicator # number error.
Remedy: Enter the correct # number for the correct tray.
------------------------------
Code: 1107BF09
Display:
Used by:
Cause: In automatic operation mode, the device mode and original axis cannot change.
Remedy: To change device mode or original axis, interrupt automatic operation mode and perform the
change.
------------------------------
Code: 1107BF0A
Display:
Used by:
Cause: During inching axis change, the machine does not have that mode.
Remedy: Use the correct inching axis.
------------------------------
Code: 1107BF0B
Display:
Used by:
Cause: In automatic operation mode, the device mode and original axis cannot change.
Remedy: To change device mode or original axis, interrupt automatic operation mode and perform the
change.
------------------------------
Code: 1107BF0C
Display:
Used by:
Cause: Because the number of devices in the production program is large, the machine can only operate
in joint mode.
Remedy: Put the machine into joint mode.
------------------------------
Code: 1107BF0D
Display:
Used by:
Cause: Because the Handy Terminal is in use, that request cannot be mode.
Remedy: Wait until after the Handy Terminal is finished.
------------------------------
Code: 1107BF0E
Display:
Used by:
Cause: In automatic operation, device lock cannot change.
Remedy: To remove the device lock interrupt automatic operation.
------------------------------
Code: 1107BF0F
第 205 页
Display:
Used by:
Cause: The pallet is being changed (PCM/PPS) so the device lock is disabled.
Remedy: The device lock cannot be used while the pallet is being changed.
------------------------------
Code: 1107BF10
Display:
Used by:
Cause: While downloading device data, the correct data was not downloaded.
Remedy: Download the device data.
------------------------------
Code: 1107BF11
Display:
Used by:
Cause: Cannot perform device check.
Remedy: None.
------------------------------
Code: 1107BF20
Display:
Used by:
Cause: Invalid parameter value.
Remedy: None.
------------------------------
Code: 1107BF30
Display:
Used by:
Cause: The pickup point cannot change in automatic operation.
Remedy: To change the pickup point, interrupt automatic operation.
------------------------------
Code: 1107BF31
Display:
Used by:
Cause: Program cannot be changed.
Remedy: None.
------------------------------
Code: 1107BF40
Display:
Used by:
Cause: With the Handy Terminal in device check, the specified device check was rejected.
Remedy: None.
------------------------------
Code: 1107BF41
Display:
Used by:
Cause: Because the start button was pressed previously, the reset switch is ineffective.
Remedy: None.
------------------------------
Code: 1107BF42
Display:
Used by:
Cause: The command was rejected because the machine is changing programs.
第 206 页