FUJI错误代码查询.pdf - 第615页

Code: 12063015 Display: "Screen Error Print Pos" Used by: GP551,GP6 Cause: Stencil transport was not possible because the stencil at the print position is not set correctly. (GSP5) The stencil at the print posi…

Remedy: Check that the parts are correct.

------------------------------

Code: 1206300D

Display: Check Name Length

Used by:

Cause: The screen name is too long.

Remedy: Screen name must not exceed 20 characters. Check the screen name heading in the production

program.

------------------------------

Code: 1206300E

Display: cleaner not at origin

Used by: GSP5,GP551,GP6

Cause: The cleaner position is unknown.

Remedy: Return the cleaner to the origin position.

------------------------------

Code: 1206300F

Display: not enough solvent

Used by: GSP5

Cause: There is no cleaning fluid.

Remedy: Add cleaning fluid.

------------------------------

Code: 12063010

Display:

Used by: GP551,GP6

Cause: Ultrasonic oscillator alarm at the cleaner.

Remedy: Check that the power is on. If this error occurs frequently replace the oscillator.

------------------------------

Code: 12063011

Display:

Used by: GSP5

Cause: The solder supply/stop command was issued, but operation was not confirmed.

Remedy: The solder supply machine communication line is probably cut. Check the line.

------------------------------

Code: 12063012

Display:

Used by: GSP5

Cause: Operation could not be carried out because the solder supply machine was incorrectly positioned.

Remedy: After returning the solder supply machine to its origin position, restart operation.

------------------------------

Code: 12063013

Display: "Screen at rear cleaning position"

Used by:

Cause: The storage command cannot be executed because there is a screen at the rear cleaning position.

Remedy: Re-execute the storage command after removing the screen from the rear cleaning position.

------------------------------

Code: 12063014

Display:

Used by:

Cause: There is no screen in the backside cleaning position so the supply command cannot be executed.

Remedy: Set a screen in the backside cleaning position and execute the command.

------------------------------

第 614 页

Code: 12063015

Display: "Screen Error Print Pos"

Used by: GP551,GP6

Cause: Stencil transport was not possible because the stencil at the print position is not set correctly.

(GSP5) The stencil at the print position is not correctly set. (GP6)

Remedy: Move the stencil that was in the process of being transported, to the proper position. (GSP5)

Set the stencil that is at the print position, in the appropriate position to allow the stencilto be clamped.

This error will occur if the stencil cannot be properly clamped at this time. (GP6)

------------------------------

Code: 12063016

Display:

Used by:

Cause: The screen is not set properly in the backside cleaning position so it cannot be transported.

Remedy: Move the screen to where it can be properly transported.

------------------------------

Code: 12063017

Display: "No Stencil At Print Pos"

Used by: GP6

Cause: Automatic operation could not be started because there was no stencil at the print position. Or a

stencil could not be stored in the stocker.

Remedy: Set a stencil.

------------------------------

Code: 12063018

Display:

Used by:

Cause: The mask receiving unit is ascended.

Remedy: Lower the mask receiving unit.

------------------------------

Code: 12063019

Display:

Used by: GSP5

Cause: Even though the camera station is out, the S-axis wants to move out.

Remedy: Retract the camera station.

------------------------------

Code: 1206301A

Display:

Used by: GSP5

Cause: When the camera station is moving, it interferes with the Y-axis. Alternately, the Y-axis interlock

sensor is not working correctly.

Remedy: Retract the Y-axis so that it does not interfere with the camera station. Also, check the interlock

sensor.

------------------------------

Code: 1206301B

Display:

Used by: GSP5

Cause: When the camera station is moving, it interferes with the S-axis. Alternately, the S-axis interlock

sensor is not working correctly.

Remedy: Retract the S-axis so that it does not interfere with the camera station. Also, check the interlock

sensor.

------------------------------

Code: 1206301C

第 615 页

Display:

Used by: GSP5,GP551,GP6

Cause: When the Y- or Z-axis is moving, it interferes with the board holder. Alternately, the board holder

interlock sensor is not working correctly.

Remedy: Retract the board holder so that it does not interfere with the camera station. Also, check the

interlock sensor.

------------------------------

Code: 1206301D

Display:

Used by: GSP5

Cause: The board and the mask expansion rate exceeds the production program's elongation_limit item.

Remedy: Increase the value of the elongation_limit in the production program or change the mask and

board. Alternately, set elongation_limit to 0 and this item will be disabled.

------------------------------

Code: 1206301E

Display:

Used by: GSP5,GP2,GP3

Cause: The screen position compensation was carried out, but the pulse motor moved more than the

value allowed in the Proper data item Max Limit Position ***.

Remedy: Check the mark coordinates in the program. Adjust the screen frame spacers. Check that the

Proper data item Max Limit Position is not set to 0.

------------------------------

Code: 1206301F

Display:

Used by:

Cause: Process timeout occurred during communication.

Remedy: Contact Fuji if this happens frequently.

------------------------------

Code: 12063020

Display:

Used by:

Cause: The stocker data set signal was output, but no reply was received.

Remedy: Check the wiring. Check that the stocker sequencer is operating correctly.

------------------------------

Code: 12063021

Display:

Used by:

Cause: A command was sent to the stocker communication unit but a response was not received within

the specified time limit.

Remedy: Check the wiring. If this error occurs frequently, check the machine version and the stocker

ROM version, and contact Fuji.

------------------------------

Code: 12063022

Display:

Used by: GSP5,GP2,GP3,GP551,GP6

Cause: Communication could not be carried out with the printing measurement machine.

Remedy: Check the wiring between the terminal and the printing measurement machine.

------------------------------

Code: 12063023

Display:

Used by: GSP5

第 616 页