FUJI错误代码查询.pdf - 第1909页
------------------------------ Code: 2100640E Display: this file is not a program Used by: Cause: The specified file is not a production program. Remedy: Check the production programs. ------------------------------ Code…
Cause: The Ls task could not be started up.
Remedy: Re-execute the function. If it still doesn't work, re-install the software.
------------------------------
Code: 21006406
Display: can't create Ls task pipe
Used by:
Cause: The Ls task pipe could not be created.
Remedy: Re-boot MCS.
------------------------------
Code: 21006407
Display: can't read Ls task pipe
Used by:
Cause: The Ls task pipe could not be read.
Remedy: Re-execute the function. If it still doesn't work, re-install the software.
------------------------------
Code: 21006408
Display: can't load program
Used by:
Cause: The specified production program couldn't be read.
Remedy: Check the file.
------------------------------
Code: 21006409
Display: can't load old permanent set table
Used by:
Cause: The specified permanent set table could not be read.
Remedy: Check the file.
------------------------------
Code: 2100640A
Display: can't get work memory
Used by:
Cause: The working memory could not be recalled.
Remedy: Re-boot MCS.
------------------------------
Code: 2100640B
Display: WARNING!! D_no.:PT data already exists
Used by:
Cause: The device number in the production program is the same as in the previous permanent set table.
Remedy: This is a warning. It is not an error message. It has no effect on processing. Check the device
numbers in the production program.
------------------------------
Code: 2100640C
Display: can't open program file
Used by:
Cause: The specified program file cannot be opened.
Remedy: Check the file.
------------------------------
Code: 2100640D
Display: can't read program file
Used by:
Cause: The specified program file cannot be read.
Remedy: Check the file.
第 1908 页
------------------------------
Code: 2100640E
Display: this file is not a program
Used by:
Cause: The specified file is not a production program.
Remedy: Check the production programs.
------------------------------
Code: 2100640F
Display: this file is not a PST
Used by:
Cause: The specified file is not a permanent set table.
Remedy: Check the file.
------------------------------
Code: 21006410
Display: can't open output PST file
Used by:
Cause: The output permanent set table cannot be opened.
Remedy: Check that the write protect setting is not on. Also, check that the hard disk has sufficient
memory.
------------------------------
Code: 21006411
Display: can't create output PST file
Used by:
Cause: The output permanent set table cannot be created.
Remedy: Check that the write protect setting is not on. Also, check that the hard disk has sufficient
memory.
------------------------------
Code: 21006412
Display: can't write output PST file
Used by:
Cause: The output permanent set table cannot be written.
Remedy: Check that the write protect setting is not on. Also, check that the hard disk has sufficient
memory.
------------------------------
Code: 21006413
Display: WARNING!!****: Cartridge name isn't registered inpart data
Used by:
Cause: The feeder is not registered in part data.
Remedy: This message has no effect on processing. However, check the feeder settings in Part data.
------------------------------
Code: 21006414
Display: can't open part data file
Used by:
Cause: Part data file cannot be opened.
Remedy: Contact Fuji.
------------------------------
Code: 21006415
Display: can't read separator data file
Used by:
Cause: The separator data file cannot be read.
Remedy: Re-install the software.
第 1909 页
------------------------------
Code: 21006500
Display: Illegal parameter
Used by:
Cause: The specified start-up parameter is illegal.
Remedy: Re-install the software.
------------------------------
Code: 21006501
Display: message file read error
Used by:
Cause: There is a message file read error.
Remedy: Re-execute the function. If it still doesn't work, re-install the software.
------------------------------
Code: 21006502
Display: console pipe open error
Used by:
Cause: Unable to open a console path.
Remedy: Re-install the software.
------------------------------
Code: 21006503
Display: CRT semaphore link error
Used by:
Cause: The terminal event could not be linked.
Remedy: Re-execute the function. If it still doesn't work, re-install the software.
------------------------------
Code: 21006505
Display: Separator Standerd File read error
Used by:
Cause: Unable to read the separator standard file.
Remedy: Check the Std file.
------------------------------
Code: 21006506
Display: Source file read error
Used by:
Cause: There was a source file read error.
Remedy: Check the source file.
------------------------------
Code: 21006507
Display: Program file open error
Used by:
Cause: Unable to open the production program.
Remedy: Check the production program.
------------------------------
Code: 21006508
Display: Memory full
Used by:
Cause: There is not enough memory.
Remedy: Check how much available memory is left. If other modules have been started up, wait until
they are finished. Otherwise, re-boot MCS.
------------------------------
Code: 21006509
第 1910 页