FUJI错误代码查询.pdf - 第2051页
Display: Offset table file open error. Used by: Cause: An error occurred when the work file for generating the offset table was opened. Remedy: Re-execute Eval_conv. ------------------------------ Code: 2100B5F8 Display:…
Display: Merge work file write error
Used by:
Cause: The work file for combining the Eval files could not be written to.
Remedy: After completing the present operation, re-execute the file. Do not combine files which exceed
the Fuji specified file size.
------------------------------
Code: 2100B5F0
Display: Eval_conv start format is differenct.
Used by:
Cause: The Eval_conv start format is wrong.
Remedy: Re-execute the Eval_conv after correcting the Eval_conv start format.
------------------------------
Code: 2100B5F1
Display: Input file not found.
Used by:
Cause: When Eval_conv was started, the specified input file could not be found.
Remedy: Re-execute Eval_conv after ensuring that the specified input file exists.
------------------------------
Code: 2100B5F2
Display: Message file read error.
Used by:
Cause: The message file cannot be expanded.
Remedy: Re-install the system.
------------------------------
Code: 2100B5F3
Display: Memory allocation error.
Used by:
Cause: The memory field could not be secured.
Remedy: After completing the present operation, execute Eval_conv again. If this does not work, reboot
the MCS.
------------------------------
Code: 2100B5F4
Display: Input file open error.
Used by:
Cause: The input file could not be opened.
Remedy: Ensure that the input file has not been corrupted.
------------------------------
Code: 2100B5F5
Display: Input file read error.
Used by:
Cause: The input file could not be read.
Remedy: Ensure that the input file has not been corrupted.
------------------------------
Code: 2100B5F6
Display: Offset table file create error.
Used by:
Cause: An error occurred when the file for generating the offset table was created.
Remedy: After completing the present operation, execute Eval_conv again. If this does not work, reboot
the MCS.
------------------------------
Code: 2100B5F7
第 2050 页
Display: Offset table file open error.
Used by:
Cause: An error occurred when the work file for generating the offset table was opened.
Remedy: Re-execute Eval_conv.
------------------------------
Code: 2100B5F8
Display: Offset table file read error.
Used by:
Cause: Data could not be read from the file for generating the offset table.
Remedy: Re-execute Eval_conv.
------------------------------
Code: 2100B5F9
Display: Offset table file write error.
Used by:
Cause: Data could not be written to the file for generating the offset table.
Remedy: After completing the present operation, re-execute Eval_conv. If this does not work, reboot the
MCS.
------------------------------
Code: 2100B5FA
Display: Work distination file create error.
Used by:
Cause: The work file for Eval file conversion could not be created.
Remedy: After completing the present operation, re-execute Eval_conv. If this does not work, reboot the
MCS.
------------------------------
Code: 2100B5FB
Display: Work distination file open error.
Used by:
Cause: An error occurred when the work file for Eval file conversion was opened.
Remedy: Re-execute Eval_conv.
------------------------------
Code: 2100B5FC
Display: Work distination file write error.
Used by:
Cause: The work file for Eval file conversion could not be written to.
Remedy: After completing the present operation, re-execute Eval_conv. If this does not work, reboot the
MCS.
------------------------------
Code: 2100B5FD
Display: Distination file copying error.
Used by:
Cause: Data could not be copied to the output file from the file for Eval file conversion.
Remedy: Re-execute Eval_conv.
------------------------------
Code: 2100BF00
Display: Environment file read error
Used by:
Cause: Unable to read the environment file.
Remedy: Check the log_file_size heading in the environment file.
------------------------------
Code: 2100BF01
第 2051 页
Display: Directory open error (PROD)
Used by:
Cause: The PROD directory does not exist.
Remedy: Check that the directory exists.
------------------------------
Code: 2100BF02
Display: Directory open error (LOG)
Used by:
Cause: Unable to open the LOG directory.
Remedy: Check that the directory can be read, and check the file services directory. If the directory
cannot be read, delete that directory.
------------------------------
Code: 2100BF03
Display: Directory open error (LINE)
Used by:
Cause: Unable to open the LOG directory.
Remedy: Check that the directory can be read, and check the file services directory. If the directory
cannot be read, delete that directory.
------------------------------
Code: 2100BF04
Display: Directory open error (MACHINE)
Used by:
Cause: Unable to open the LOG directory.
Remedy: Check that the directory can be read, and check the file services directory. If the directory
cannot be read, delete that directory.
------------------------------
Code: 2100BF05
Display: File delete error (****)
Used by:
Cause: Unable to delete the **** file.
Remedy: Check that the delete protect (lock) setting is not set on this file.
------------------------------
Code: 2100C002
Display: Command syntax error
Used by:
Cause: An incorrect direct command was entered to boot up the File Services or wild card characters (*,?)
were used when renaming a file.
Remedy: Check and input the correct command. Wild card characters are not allowed.
------------------------------
Code: 2100C003
Display: Invalid File Name
Used by:
Cause: No file exists with the input file name, or when using the copy function, the source and
destination files have been given exactly the same name and path.
Remedy: Use the directory function in the file services menu to check the file. Check that no two
filenames are the same.
------------------------------
Code: 2100C004
Display: No Saved File
Used by:
Cause: There is no file in the recovery buffer. This is a warning.
第 2052 页