FUJI错误代码查询.pdf - 第1960页
Remedy: Re-execute the function. If the error recurs, re-boot MCS. ------------------------------ Code: 21007721 Display: Write pipe create error Used by: Cause: Unable to create the pipe. Remedy: Re-execute the function…
Used by:
Cause: The seek function did not work on the nozzle assignment table file.
Remedy: Check the filename and the file contents. If there is a startup error or if the contents of the file
are damaged, rebuild the file.
------------------------------
Code: 21007719
Display: MTT file open error
Used by:
Cause: Unable to open the MTT file.
Remedy: Re-install the software.
------------------------------
Code: 2100771A
Display: MTT file read error
Used by:
Cause: Unable to read the MTT file.
Remedy: Re-install the software.
------------------------------
Code: 2100771B
Display: MTT file seek error
Used by:
Cause: The seek function did not work on the MTT file.
Remedy: Re-install the software.
------------------------------
Code: 2100771C
Display: MTT file path read error
Used by:
Cause: Unable to read the machine type table path.
Remedy: Re-install the system.
------------------------------
Code: 2100771D
Display: Index file open error
Used by:
Cause: Unable to open the index file.
Remedy: Re-install the software.
------------------------------
Code: 2100771E
Display: Index file read error
Used by:
Cause: Unable to read the index file.
Remedy: Re-install the software.
------------------------------
Code: 2100771F
Display: Memory full
Used by:
Cause: Memory is full.
Remedy: Re-boot MCS.
------------------------------
Code: 21007720
Display: Read pipe create error
Used by:
Cause: Unable to create the pipe.
第 1959 页
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 21007721
Display: Write pipe create error
Used by:
Cause: Unable to create the pipe.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 21007722
Display: Dequeuing error
Used by:
Cause: Unable to dequeue the memory.
Remedy: Re-boot MCS.
------------------------------
Code: 21007723
Display: Queing error
Used by:
Cause: Unable to process the memory.
Remedy: Re-boot MCS.
------------------------------
Code: 21007724
Display: Que data moving error
Used by:
Cause: Unable to process the memory.
Remedy: Re-boot MCS.
------------------------------
Code: 21007725
Display: Strategy file read error
Used by:
Cause: Unable to read the system (strategy) file.
Remedy: Re-install the software.
------------------------------
Code: 21007726
Display: Make not mark sequence
Used by:
Cause: Special sequences were not created.
Remedy: This warning message displays when there is an input program without special sequences.
------------------------------
Code: 21007727
Display: No entry Input file name
Used by:
Cause: The input program filename has not been input.
Remedy: Input the filename.
------------------------------
Code: 21007728
Display: Output file already exist
Used by:
Cause: An output file with the same name already exists.
Remedy: Either change the name of the output file, or overwrite the old file.
------------------------------
Code: 21007729
第 1960 页
Display: File data type unmatch.
Used by:
Cause: The input program data type is inappropriate.
Remedy: Check the file.
------------------------------
Code: 2100772A
Display: File machine type unmatch
Used by:
Cause: The input program data type is inappropriate.
Remedy: Check the file.
------------------------------
Code: 2100772B
Display: Production file expand error
Used by:
Cause: During expansion of the input program, an error occurred.
Remedy: Use [Cntrl] + [E] to check the contents of the expander.
------------------------------
Code: 2100772C
Display: Not get Part data file name
Used by:
Cause: A Part data name is not entered in the device number being used in Sequence data.
Remedy: Check the Part data name in the production program device data.
------------------------------
Code: 2100772D
Display: Not get Nozzle assignment table file name
Used by:
Cause: The nozzle table file name was not entered in the production program.
Remedy: Input the table file name.
------------------------------
Code: 2100772E
Display: Not get nozzle size
Used by:
Cause: The nozzle size cannot be called up.
Remedy: Check the nozzle table.
------------------------------
Code: 2100772F
Display: Same davice comment entry in PST file
Used by:
Cause: A device comment with the same name exists in the PST file.
Remedy: The same name cannot be used. Change the comment.
------------------------------
Code: 21007730
Display: No entry Cartridge name in PST file
Used by:
Cause: The feeder name has not been entered in the PST file.
Remedy: Input the feeder name.
------------------------------
Code: 21007731
Display: Can not feedback Fix device
Used by:
Cause: Unable to feed back the fixed device. The fixed device's device number is incorrect.
第 1961 页