FUJI错误代码查询.pdf - 第1968页
Remedy: The filename must be 23 characters or less. ------------------------------ Code: 2100780B Display: Output file name is too long Used by: Cause: The output filename is too long. Remedy: The filename must be 23 cha…
Display: CRT event link error
Used by:
Cause: The CRT event could not be linked.
Remedy: Re-boot MCS.
------------------------------
Code: 21007803
Display: Read pipe create error
Used by:
Cause: The read pipe could not be created.
Remedy: Re-boot MCS.
------------------------------
Code: 21007804
Display: Write pipe create error
Used by:
Cause: The write pipe could not be created.
Remedy: Re-boot MCS.
------------------------------
Code: 21007805
Display: Illegal parameter
Used by:
Cause: The parameters are illegal.
Remedy: Check the startup parameters and re-boot.
------------------------------
Code: 21007806
Display: No entry Input file name
Used by:
Cause: The input program name has not been registered.
Remedy: Register the input program name.
------------------------------
Code: 21007807
Display: No entry Nozzle file name
Used by:
Cause: The nozzle information file name has not been registered.
Remedy: Register the nozzle information file name.
------------------------------
Code: 21007808
Display: No entry Tray file name
Used by:
Cause: The tray information file name has not been registered.
Remedy: Register the tray information file name.
------------------------------
Code: 21007809
Display: Output file already exist
Used by:
Cause: The output file already exists.
Remedy: Either specify rewrite or change the output filename.
------------------------------
Code: 2100780A
Display: Input file name is too long
Used by:
Cause: The input filename is too long.
第 1967 页
Remedy: The filename must be 23 characters or less.
------------------------------
Code: 2100780B
Display: Output file name is too long
Used by:
Cause: The output filename is too long.
Remedy: The filename must be 23 characters or less.
------------------------------
Code: 2100780C
Display: PT file name is too long
Used by:
Cause: The PT filename is too long.
Remedy: The filename must be 23 characters or less.
------------------------------
Code: 2100780D
Display: Nozzle file name is too long
Used by:
Cause: The nozzle information filename is too long.
Remedy: The filename must be 23 characters or less.
------------------------------
Code: 2100780E
Display: Tray file name is too long
Used by:
Cause: The tray filename is too long.
Remedy: The filename must be 23 characters or less.
------------------------------
Code: 2100780F
Display: Input file open error
Used by:
Cause: Input file open error.
Remedy: Edit the input program at the editor.
------------------------------
Code: 21007810
Display: Input file read error
Used by:
Cause: Input file read error.
Remedy: Edit the input program at the editor.
------------------------------
Code: 21007811
Display: Input file data type unmatch
Used by:
Cause: The input program data type is not a program.
Remedy: Specify an input program in the program file.
------------------------------
Code: 21007812
Display: Input file machine type unmatch
Used by:
Cause: A non-IP3 program was specified for optimization.
Remedy: Specify an IP3 program.
------------------------------
Code: 21007813
第 1968 页
Display: Output file open error
Used by:
Cause: There is not enough memory in the hard disk.
Remedy: Delete unnecessary files.
------------------------------
Code: 21007814
Display: Output file write error
Used by:
Cause: There is not enough memory in the hard disk.
Remedy: Delete unnecessary files.
------------------------------
Code: 21007815
Display: PT file open error
Used by:
Cause: PT file open error.
Remedy: Edit the file at the editor.
------------------------------
Code: 21007816
Display: PT file read error
Used by:
Cause: PT file read error.
Remedy: Edit the file at the editor.
------------------------------
Code: 21007817
Display: PT file data type unmatch
Used by:
Cause: The Permanent set table file has the wrong data type.
Remedy: Put PT data into the PT file.
------------------------------
Code: 21007818
Display: PD file open error
Used by:
Cause: Part data file open error.
Remedy: Edit the file at the editor.
------------------------------
Code: 21007819
Display: PD file read error
Used by:
Cause: Part data file read error.
Remedy: Edit the file at the editor.
------------------------------
Code: 2100781A
Display: PD file data type unmatch
Used by:
Cause: The wrong type of data is in Part data.
Remedy: Specify the Part data in the input program.
------------------------------
Code: 2100781B
Display: Nozzle file open error
Used by:
Cause: Nozzle file open error.
第 1969 页