FUJI错误代码查询.pdf - 第53页

Code: 1101169E Display: Used by: IP2 Cause: There has been a mark reading sequence found after in the placing sequences (sequences 1751~1875). Fiducial mark or block skip mark reading sequences must all be executed befor…

Cause: There has been a mark reading sequence found after in the placing sequences (sequences

1001~1125). Fiducial mark or block skip mark reading sequences must all be executed before any placing

sequences.

Remedy: Alter the production program so that the mark reading sequences are executed before any

placing sequences. The relevant sequences for this message are 1001~1125.

------------------------------

Code: 11011699

Display:

Used by: IP2

Cause: There has been a mark reading sequence found after in the placing sequences (sequences

1126~1250). Fiducial mark or block skip mark reading sequences must all be executed before any placing

sequences.

Remedy: Alter the production program so that the mark reading sequences are executed before any

placing sequences. The relevant sequences for this message are 1126~1250.

------------------------------

Code: 1101169A

Display:

Used by: IP2

Cause: There has been a mark reading sequence found after in the placing sequences (sequences

1251~1375). Fiducial mark or block skip mark reading sequences must all be executed before any placing

sequences.

Remedy: Alter the production program so that the mark reading sequences are executed before any

placing sequences. The relevant sequences for this message are 1251~1375.

------------------------------

Code: 1101169B

Display:

Used by: IP2

Cause: There has been a mark reading sequence found after in the placing sequences (sequences

1376~1500). Fiducial mark or block skip mark reading sequences must all be executed before any placing

sequences.

Remedy: Alter the production program so that the mark reading sequences are executed before any

placing sequences. The relevant sequences for this message are 1376~1500.

------------------------------

Code: 1101169C

Display:

Used by: IP2

Cause: There has been a mark reading sequence found after in the placing sequences (sequences

1501~1625). Fiducial mark or block skip mark reading sequences must all be executed before any placing

sequences.

Remedy: Alter the production program so that the mark reading sequences are executed before any

placing sequences. The relevant sequences for this message are 1501~1625.

------------------------------

Code: 1101169D

Display:

Used by: IP2

Cause: There has been a mark reading sequence found after in the placing sequences (sequences

1626~1750). Fiducial mark or block skip mark reading sequences must all be executed before any placing

sequences.

Remedy: Alter the production program so that the mark reading sequences are executed before any

placing sequences. The relevant sequences for this message are 1626~1750.

------------------------------

第 52 页

Code: 1101169E

Display:

Used by: IP2

Cause: There has been a mark reading sequence found after in the placing sequences (sequences

1751~1875). Fiducial mark or block skip mark reading sequences must all be executed before any placing

sequences.

Remedy: Alter the production program so that the mark reading sequences are executed before any

placing sequences. The relevant sequences for this message are 1751~1875.

------------------------------

Code: 1101169F

Display:

Used by: IP2

Cause: There has been a mark reading sequence found after in the placing sequences (sequences

1876~2000). Fiducial mark or block skip mark reading sequences must all be executed before any placing

sequences.

Remedy: Alter the production program so that the mark reading sequences are executed before any

placing sequences. The relevant sequences for this message are 1876~2000.

------------------------------

Code: 11011700

Display:

Used by: IP2

Cause: On the IP2, an unsupported feeder type has been specified in Part data (somewhere in devices

1~25).

Remedy: Check the above mentioned devices and enter the correct feeder type in Part data.

------------------------------

Code: 11011701

Display:

Used by: IP2

Cause: On the IP2, an unsupported feeder type has been specified in Part data (somewhere in devices

26~37).

Remedy: Check the above mentioned devices and enter the correct feeder type in Part data.

------------------------------

Code: 11011702

Display:

Used by: IP2

Cause: On the IP2, an unsupported feeder type has been specified in Part data (somewhere in devices

51~75).

Remedy: Check the above mentioned devices and enter the correct feeder type in Part data.

------------------------------

Code: 11011703

Display:

Used by: IP2

Cause: On the IP2, an unsupported feeder type has been specified in Part data (somewhere in devices

76~87).

Remedy: Check the above mentioned devices and enter the correct feeder type in Part data.

------------------------------

Code: 11011704

Display: 11011704

Used by: IP2

Cause: A package type which is not supported on the FIP-II has been set in Part data. The relevant

device is within the range D101 ~ 110 or D111 ~ 120.

第 53 页

Remedy: Refer to the above device numbers and enter correct values for the package type in Part data.

------------------------------

Code: 11011710

Display:

Used by: IP2

Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an

MTU on the machine, these devices cannot be used. This is to prevent possible interference between

feeders and the carrier. This message applies to sequences 1~125.

Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3

(85~87 if there is a left MTU) are not used.

------------------------------

Code: 11011711

Display:

Used by: IP2

Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an

MTU on the machine, these devices cannot be used. This is to prevent possible interference between

feeders and the carrier. This message applies to sequences 126~250.

Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3

(85~87 if there is a left MTU) are not used.

------------------------------

Code: 11011712

Display:

Used by: IP2

Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an

MTU on the machine, these devices cannot be used. This is to prevent possible interference between

feeders and the carrier. This message applies to sequences 251~375.

Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3

(85~87 if there is a left MTU) are not used.

------------------------------

Code: 11011713

Display:

Used by: IP2

Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an

MTU on the machine, these devices cannot be used. This is to prevent possible interference between

feeders and the carrier. This message applies to sequences 376~500.

Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3

(85~87 if there is a left MTU) are not used.

------------------------------

Code: 11011714

Display:

Used by: IP2

Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an

MTU on the machine, these devices cannot be used. This is to prevent possible interference between

feeders and the carrier. This message applies to sequences 501~625.

Remedy: Check the above mentioned sequences and alter the production program so that devices 1~3

(85~87 if there is a left MTU) are not used.

------------------------------

Code: 11011715

Display:

Used by: IP2

Cause: An attempt was made to use devices 1~3 (85~87) when an MTU is installed. When there is an

第 54 页