FUJI错误代码查询.pdf - 第1933页

------------------------------ Code: 2100741C Display: Station device over Used by: Cause: The device is not placed on the station. Remedy: Join the feeder. Alternately, stop using the PST and base program. -------------…

100%1 / 5282
Remedy: Check the input filename.
------------------------------
Code: 21007414
Display: PST file open error
Used by:
Cause: Unable to read the PST file.
Remedy: Check the file.
------------------------------
Code: 21007415
Display: Offset table read error
Used by:
Cause: Unable to read the file.
Remedy: Check the file and save it.
------------------------------
Code: 21007416
Display: Station over
Used by:
Cause: The device cannot go into the station.
Remedy: Join the feeders. Alternately, stop using the PST and base program.
------------------------------
Code: 21007417
Display: Cartridge data read error
Used by:
Cause: Unable to read feeder data.
Remedy: Check the Part data input headings.
------------------------------
Code: 21007418
Display: coefficient read error
Used by:
Cause: The fixed device was to have been placed where it could not be placed.
Remedy: Depending on the feeder width, there are cases where the feeders cannot be placed on the ends
of the stations. Change the location.
------------------------------
Code: 21007419
Display: Occupancy error
Used by:
Cause: The fixed device table tried to place devices where they could not be placed.
Remedy: Depending on the feeder width, there are cases where the feeders cannot be placed next to each
other. Change the location.
------------------------------
Code: 2100741A
Display: Slot info read error
Used by:
Cause: Unable to read the information.
Remedy: Re-install the software.
------------------------------
Code: 2100741B
Display: Occupancy data not found
Used by:
Cause: Unable to read the information.
Remedy: Re-install the software.
第 1932 页
------------------------------
Code: 2100741C
Display: Station device over
Used by:
Cause: The device is not placed on the station.
Remedy: Join the feeder. Alternately, stop using the PST and base program.
------------------------------
Code: 2100741D
Display: Station3 device over
Used by:
Cause: The device is not placed on station 3.
Remedy: Join the feeder. Alternately, stop using the PST and base program.
------------------------------
Code: 2100741E
Display: Production file write err
Used by:
Cause: Unable to write to the file.
Remedy: Check how much memory remains in the hard disk.
------------------------------
Code: 2100741F
Display: Memory is full
Used by:
Cause: Memory is full.
Remedy: Re-boot MCS.
------------------------------
Code: 21007421
Display: Part data open error
Used by:
Cause: Unable to open Part data.
Remedy: Check the file.
------------------------------
Code: 21007422
Display: Part data read error
Used by:
Cause: Unable to read Part data.
Remedy: Check the file.
------------------------------
Code: 21007423
Display: PST read error
Used by:
Cause: Unable to read the PST file.
Remedy: Check the file.
------------------------------
Code: 21007424
Display: Index file not found
Used by:
Cause: Index file not found.
Remedy: Re-install the software.
------------------------------
Code: 21007425
Display: Index file open error
第 1933 页
Used by:
Cause: Unable to open the index file.
Remedy: Re-install the software.
------------------------------
Code: 21007426
Display: Strategy file get error
Used by:
Cause: There is no strategy file.
Remedy: Re-install the software.
------------------------------
Code: 21007427
Display: Make not mark sequence
Used by:
Cause: Mark data was not created.
Remedy: This message occurs when there is a program without mark data.
------------------------------
Code: 21007428
Display: Prod file not write
Used by:
Cause: Unable to write to file.
Remedy: Check how much memory remains in the hard disk. If there is insufficient, delete unnecessary
files or execute the "H/D maintenance" function.
------------------------------
Code: 21007429
Display: Source file not found
Used by:
Cause: There is no source file.
Remedy: Check the source file name.
------------------------------
Code: 2100742A
Display: Source file open error
Used by:
Cause: Unable to open source file.
Remedy: Check the file.
------------------------------
Code: 2100742B
Display: Output file not found
Used by:
Cause: The output file does not exist.
Remedy: Re-start the MCS.
------------------------------
Code: 2100742C
Display: Output file open error
Used by:
Cause: Unable to open the output file.
Remedy: Check that the write protect function is not on.
------------------------------
Code: 2100742E
Display: Can not use Cartridge type
Used by:
Cause: Unable to use feeder type.
第 1934 页