FUJI错误代码查询.pdf - 第601页
Remedy: If this error occurs frequently, there may be a parts height sensor failure. ------------------------------ Code: 1206101F Display: Feeder feed retract limit error. Used by: CP-742ME, CP-742E, CP-752E Cause: Feed…
Display: ST1:Nozzle up/down error
ST1:UP-lmt sensor ON
Used by: CP643
Cause: The ST1 cylinder upper limit sensor is ON even though the machine has lowered the nozzle at
ST1 to pick up a part.
Remedy: Check the ST1 cylinder upper limit sensor(X06A)
------------------------------
Code: 12061019
Display: ST11:Nozzle up/down error
ST11:UP-lmt sensor OFF
Used by: CP643
Cause: The ST11 cylinder upper limit sensor was OFF even though the stopper has been engaged to
prevent the nozzle at ST11 from descending,after the head at ST10 was a skipped head during at the start
of automatic operation.
Remedy: Check the ST11 stopper and the ST11 cylinder upper limit sensor(X06B)
------------------------------
Code: 1206101A
Display: ST11:Nozzle up/down error
ST11:UP/DWN sensor error
Used by: CP643
Cause: Both the cylinder upper limit and lower limit sensors are ON even though the machine has
lowered the nozzle ae ST11 to place a part.
Remedy: Check the ST11 cylinder upper limit sensor(X06B)
------------------------------
Code: 1206101B
Display: Production method does not match
Check Proper and header data
Used by: CP643
Cause: The production program item "Multiple pcb set" is set to "2", even though the Proper data item
"mc_pcb_type" is set to "1". These data do not match.
Remedy: Use one of the following remedies.
1. Set Proper item "mc_pcb_type" to "0".
2. Set the production program item "Multiple pcb set" to "1" and ensure there is only one board's worth of
sequences in the sequence data.
------------------------------
Code: 1206101C
Display: Nozzle holder origin position error.
Used by: CP-742ME, CP-742E, CP-752E
Cause: The nozzle holder is not at its origin position.
Remedy: Frequent occurrences of this error at the same shaft indicates a shaft rotation problem.
------------------------------
Code: 1206101D
Display: Parts height sensor malfunction.
Used by: CP-742ME, CP-742E, CP-752E
Cause: Parts height sensor is soiled.
Remedy: Wipe the sensor beam emitter and receptor lenses with a soft object such as a cotton swab, etc.
------------------------------
Code: 1206101E
Display: Parts height sensor error.
Used by: CP-742ME, CP-742E, CP-752E
Cause: Parts height sensor processing was not completed in the prescribed period of time.
第 600 页
Remedy: If this error occurs frequently, there may be a parts height sensor failure.
------------------------------
Code: 1206101F
Display: Feeder feed retract limit error.
Used by: CP-742ME, CP-742E, CP-752E
Cause: Feeder feed retract limit error.
Remedy: Check to see if the feeder feed lever is at the retract limit position. If not, perform an I/O check
to retract the feed lever. If the retract limit sensor fails to switch on even though the feed lever is
retracted, adjust the sensor and dog positions. If the error persists even after the adjustments, there may
be a sensor wiring problem or a sensor failure.
------------------------------
Code: 12061020
Display: The X-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The X-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Remedy: Verify that the X-axis coordinates are correct in the production program.
------------------------------
Code: 12061021
Display: The X-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The X-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Remedy: Verify that the X-axis coordinates are correct in the production program.
------------------------------
Code: 12061022
Display: The Y-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The Y-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Remedy: Verify that the Y-axis coordinates are correct in the production program.
------------------------------
Code: 12061023
Display: The Y-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The Y-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Remedy: Verify that the Y-axis coordinates are correct in the production program.
------------------------------
Code: 12061024
Display: The Z-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The Z-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Remedy: Verify that the parts height is set correctly in Part data.
------------------------------
Code: 12061025
Display: The Z-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The Z-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Remedy: Verify that the parts height is set correctly in Part data.
------------------------------
Code: 12061026
Display: The D1-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The D1-axis target position exceeds the plus-limit of the travel range specified in Proper data.
第 601 页
Remedy: Verify that the correct slot number is specified in the production program. Alternatively, verify
that the device offset settings are correctly specified in Part data and Proper data.
------------------------------
Code: 12061027
Display: The D1-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The D1-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Remedy: Verify that the correct slot number is specified in the production program. Alternatively, verify
that the device offset settings are correctly specified in part data and Proper data.
------------------------------
Code: 12061028
Display: The D2-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The D2-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Remedy: Verify that the correct slot number is specified in the production program. Alternatively, verify
that the device offset settings are correctly specified in Part data and Proper data.
------------------------------
Code: 12061029
Display: The D2-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The D2-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Remedy: Verify that the correct slot number is specified in the production program. Alternatively, verify
that the device offset settings are correctly specified in Part data and Proper data.
------------------------------
Code: 1206102A
Display: The NZ-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The NZ-axis target position exceeds the plus-limit of the travel range specified in Proper data.
Remedy: Verify that a suitable pickup height offset is specified in Part data.
------------------------------
Code: 1206102B
Display: The NZ-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The NZ-axis target position exceeds the minus-limit of the travel range specified in Proper data.
Remedy: Verify that a suitable pickup height offset is specified in Part data.
------------------------------
Code: 1206102C
Display: Head A detection error.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: Head A detection error.
Remedy: Check to see if the Head A sensor is operating properly.
------------------------------
Code: 1206102D
Display: Head A detection sensor error.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
Cause: The Head A detection sensor is not operating properly.
Remedy: Check the sensor wiring. If the wiring is OK, replace the sensor.
------------------------------
Code: 1206102E
Display: Feeder ID reading error.
Used by: CP-732E, CP-742ME, CP-742E, CP-752E
第 602 页