FUJI错误代码查询.pdf - 第2185页

perform the operation again. ------------------------------ Code: 51??0023 Display: File does not exist. Used by: Cause: The specified file does not exist. Remedy: Check the specified file name. Alternatively copy or cre…

100%1 / 5282
Remedy: Check the partial data setting.
------------------------------
Code: 51??0011
Display: Read level setting is incorrect.
Used by:
Cause: There is an error in the read level setting specified in the command line.
Remedy: Check the read level setting.
------------------------------
Code: 51??0012
Display: The file type setting is incorrect.
Used by:
Cause: There is an error in the file type setting specified in the command line.
Remedy: Check the file type setting.
------------------------------
Code: 51??0013
Display: The host name setting is incorrect.
Used by:
Cause: There is an error in the host name specified in the command line.
Remedy: Check the host name setting.
------------------------------
Code: 51??0014
Display: The block number setting is incorrect.
Used by:
Cause: There is an error in the block number specified in the command line.
Remedy: Check the block number setting.
------------------------------
Code: 51??0015
Display: The line configuration setting is incorrect.
Used by:
Cause: There is an error in the line configuration specified in the command line.
Remedy: Check the line configuration setting.
------------------------------
Code: 51??0020
Display: File format error.
Used by:
Cause: There is a mistake in the format of the production program file, the pallet data file, the partial
data file, the Proper data file or the status data file.
Remedy: Check and correct the file format. Supplementary data may be displayed which will indicate the
approximate location of the error.
------------------------------
Code: 51??0021
Display: Arrived at EOF.
Used by:
Cause: A file was read and an EOF was detected at a location where it was not expected.
Remedy: Check and correct the contents of the file.
------------------------------
Code: 51??0022
Display: File already exists.
Used by:
Cause: The specified file already exists.
Remedy: Check the specified file name. If the file can be overwritten, specify the overwrite command and
第 2184 页
perform the operation again.
------------------------------
Code: 51??0023
Display: File does not exist.
Used by:
Cause: The specified file does not exist.
Remedy: Check the specified file name. Alternatively copy or create the file in the directory.
------------------------------
Code: 51??0024
Display: File in exclusive hold.
Used by:
Cause: The specified file is being used exclusively.
Remedy: Wait until exclusive use of the file has ended and then re-execute the command.
------------------------------
Code: 51??0025
Display: File is not held.
Used by:
Cause: The specified file is not held or it has already been released.
Remedy: Check the setting made for the "release" file name.
------------------------------
Code: 51??0026
Display: File hold time-out error has occurred.
Used by:
Cause: The specified file is being used exclusively and a time-out error occurred while waiting to acquire
it.
Remedy: Wait until exclusive use of the file has ended and then re-execute the command.
------------------------------
Code: 51??0027
Display: File cannot be accessed.
Used by:
Cause: Accessing the specified file is not permitted.
Remedy:
------------------------------
Code: 51??0028
Display: File cannot be opened.
Used by:
Cause: The specified file cannot be opened.
Remedy:
------------------------------
Code: 51??0029
Display: File cannot be read.
Used by:
Cause: An error occurred when the specified file was read. This is believed to be an I/O error.
Remedy:
------------------------------
Code: 51??0030
Display: File cannot be written to.
Used by:
Cause: An error occurred when the specified file was written to. This is believed to be an I/O error.
Remedy:
------------------------------
第 2185 页
Code: 51??0031
Display: No "UNIT', "STRUCT".
Used by:
Cause: There is no "UNIT", "STRUCT" in the specified file. "UNIT", "STRUCT" is necessary at the head of
the file.
Remedy: Input "UNIT", "STRUCT" in the relevant file.
------------------------------
Code: 51??0032
Display: "UNIT", "STRUCT' entry is incorrect.
Used by:
Cause: The content of "UNIT", "STRUCT" in the specified file is incorrect.
Remedy: Check that "BLOCK", "HEADER-" is in "UNIT", "STRUCT" and that the entry for "FILETYPE",
"FILESTRUCT" is correct.
------------------------------
Code: 51??0033
Display: No entry for "FILETYPE".
Used by:
Cause: There is no entry for "FILETYPE" in the specified production program's "UNIT", "STRUCT" -
"BLOCK", "HEADER-".
Remedy: "FILETYPE" is a mandatory item.
------------------------------
Code: 51??0034
Display: No entry for "FILESTRUCT".
Used by:
Cause: There is no entry for "FILESTRUCT" in the specified production program's "UNIT", "STRUCT" -
""BLOCK", 'HEADER-".
Remedy: "FILESTRUCT" is a mandatory item.
------------------------------
Code: 51??0035
Display: Transmission image data file.
Used by:
Cause: The specified production program, partial data, Proper data and status data files are transmission
image format files.
Remedy:
------------------------------
Code: 51??0036
Display: Specified file for different machine type.
Used by:
Cause: The data in the specified file is for a different machine type. For Proper data, the machine type
specified at "MCTYPE" is checked.
Remedy: Specify the correct file or check the file's machine-type definition.
------------------------------
Code: 51??0037
Display: Machine type not defined in specified file.
Used by:
Cause: The machine type is not specified in the header data of the specified file.
Remedy: Enter the "MCTYPE" item.
------------------------------
Code: 51??0038
Display: Name not defined in specified file.
Used by:
第 2186 页