FUJI错误代码查询.pdf - 第9页

Display: DVX11010316 Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643 Cause: The cam speed is not specified in Part data 079~091 (CP4). Remedy: Check Part data items 079~091. Enter an appropriate cam speed. --…

Cause: The nozzle designated in Part data is outside the accepted range of 0~3. On the IP-II, the nozzle

number is set incorrectly.

Remedy: Check the nozzle number in Part data. The system memory may have rejected the contents. In

this case, perform Reset- start.

On the IP-II, when nozzle 2 or 3 is being used, check the settings in the production program, as these

nozzles are fixed.

------------------------------

Code: 1101030D

Display: Cartridge type

Used by: IP2,QP242,QP201,QP202,QP203

Cause: An inoperative value has been entered as a feeder type in Part data

(IP2).

Remedy: After checking that the value is correct, re-transmit the production program.

------------------------------

Code: 11010310

Display: DVX11010310

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: The cam speed is not specified in Part data 001~013 (CP4).

Remedy: Check Part data items 001~013. Enter an appropriate cam speed.

------------------------------

Code: 11010311

Display: DVX11010311

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: The cam speed is not specified in Part data 014~026 (CP4).

Remedy: Check Part data items 014~026. Enter an appropriate cam speed.

------------------------------

Code: 11010312

Display: DVX11010312

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: The cam speed is not specified in Part data 027~039 (CP4).

Remedy: Check Part data items 027~039. Enter an appropriate cam speed.

------------------------------

Code: 11010313

Display: DVX11010313

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: The cam speed is not specified in Part data 040~052 (CP4).

Remedy: Check Part data items 040~052. Enter an appropriate cam speed.

------------------------------

Code: 11010314

Display: DVX11010314

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: The cam speed is not specified in Part data 053~065 (CP4).

Remedy: Check Part data items 053~065. Enter an appropriate cam speed.

------------------------------

Code: 11010315

Display: DVX11010315

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: The cam speed is not specified in Part data 066~078 (CP4).

Remedy: Check Part data items 066~078. Enter an appropriate cam speed.

------------------------------

Code: 11010316

第 8 页

Display: DVX11010316

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: The cam speed is not specified in Part data 079~091 (CP4).

Remedy: Check Part data items 079~091. Enter an appropriate cam speed.

------------------------------

Code: 11010317

Display: DVX11010317

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: The cam speed is not specified in Part data 091~104 (CP4).

Remedy: Check Part data items 091~104. Enter an appropriate cam speed.

------------------------------

Code: 11010318

Display: DVX11010318

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: The cam speed is not specified in Part data 105~117 (CP4).

Remedy: Check Part data items 105~117. Enter an appropriate cam speed.

------------------------------

Code: 11010319

Display: DVX11010319

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: The cam speed is not specified in Part data 118~130 (CP4).

Remedy: Check Part data items 118~130. Enter an appropriate cam speed.

------------------------------

Code: 1101031A

Display: DVX1101031A

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP652C,CP642,CP643

Cause: The cam speed is not specified in Part data 131~143 (CP4).

Remedy: Check Part data items 131~143. Enter an appropriate cam speed.

------------------------------

Code: 1101031B

Display: DVX1101031B

Used by: CP4-3,CP652C

Cause: The cam speed is not specified in Part data 144~156 (CP4).

Remedy: Check Part data items 144~156.

------------------------------

Code: 1101031C

Display: DVX1101031C

Used by: CP4-3,CP652C

Cause: The cam speed is not specified in Part data 157~169 (CP4).

Remedy: Check Part data items 157~169.

------------------------------

Code: 1101031D

Display: DVX1101031D

Used by: CP652C

Cause: The cam speed is not specified in Part data 170~182 (CP4).

Remedy: Check Part data items 170~182.

------------------------------

Code: 1101031E

Display: DVX1101031E

Used by: CP652C

Cause: The cam speed is not specified in Part data 183~195 (CP4).

第 9 页

Remedy: Check Part data items 183~195.

------------------------------

Code: 1101031F

Display: DVX1101031F

Used by: CP652C

Cause: The cam speed is not specified in Part data 196~208.

Remedy: Check Part data items 196~208.

------------------------------

Code: 11010320

Display: Claw may interfere with parts

Used by: QP3OF

Cause: When placing adjacent parts, a claw may interfere with parts that have already been placed.

Remedy: If a claw interferes with parts, change the claw used for placing the adjacent parts to type 2 or 3,

or set the claw乫s Q-axis pick-up rotation to 90 degrees.If no interference occurs, production can be

commenced using the existing recipe.The following examples are when this error is output without actual

interference occurring: *The height of the part to be placed is lower than that of adjacent parts already

placed. *The claw pick-up width for the adjacent part to be placed is set for clamping the inner section of a

part, and is narrower than the part outline.

------------------------------

Code: 11010401

Display:

Used by: QP242,QP201,QP202,QP203

Cause: The item "Recipe_number" is out of range.

Remedy: After checking "Recipe_number" in MCS, transmit the program.

When the next production stage is the reflow oven, the MBID range is 1~30. In other words, when

Machine_type = 7 and

Machine_control_mode = 5 the Recipe_number = 1~30.

Otherwise, there are no special settings.

------------------------------

Code: 11010402

Display:

Used by: QP242,QP201,QP202,QP203

Cause: The "Cvyr_speed" setting is incorrect.

Remedy: After checking "Cnvyr_speed" in MCS, transmit the program.

When the next production stage is the reflow oven, the MBID range is 1~42. In other words, when

Machine_type = 7 and

Machine_control_mode = 5, then Cnvyr_speed = 1~42.

Otherwise, there are on special settings.

------------------------------

Code: 11010403

Display:

Used by: QP242,QP201,QP202,QP203

Cause: The "Oven_data" setting is incorrect.

Remedy: After checking "Oven_data" in MCS, transmit the program.

------------------------------

Code: 11010404

Display:

Used by: QP242,QP201,QP202,QP203

Cause: The "Oven_check_data" setting is incorrect.

Remedy: After checking "Oven_check_data" in MCS, transmit the program.

------------------------------

第 10 页