FUJI错误代码查询.pdf - 第1211页

Code: 1CC06003 Display: 1CC06003 Used by: Cause: 2D code could not be found. Remedy: Reinspect the image to check whether the 2D code was correctly captured or not. ------------------------------ Code: 1CC06004 Display: …

100%1 / 5282
Code: 1CC04003
Display: 1CC04003
元件的方向不对。(XP242)
Used by: XP242
Cause: 元件的方向不对。
Remedy: 请确认元件的供应方向。请确认定位点检查位置·范围。
------------------------------
Code: 1CC04004
Display: 1CC04004
Used by:
Cause: Incorrect setting value in the Part data's Fst_Pin_check_data item (for MCS), or in the Check
Mode algorithm (for F4G).
Remedy: Enter "0, 4, or 5" at the part data's Fst_pin_check_data item (for MCS), or at the Check mode
algorithm (For F4G).
For the CUT mode, enter "0" at the algorithm. For the MARK mode, enter "4" or "5".
------------------------------
Code: 1CC05001
Display: 1CC05001
Used by:
Cause: The mark check area (range) is outside the body of the part.
Remedy: Correct the coordinates of the mark check area (range).
------------------------------
Code: 1CC05002
Display: 1CC05002
Used by:
Cause: Invalid setting for the mark check range.
Remedy: This error occurs if X1 and X2 are the same or smaller, or if Y1 and Y2 are the same or smaller.
The smallest range is five pixels. Ensure the setting is five pixels or greater.
------------------------------
Code: 1CC05003
Display: 1CC05003
Used by:
Cause: The part orientation is not correct.
Remedy: Check the feeding direction of the part.Check the mark check area (range).
------------------------------
Code: 1CC06001
Display: 1CC06001
Used by:
Cause: Failed to register the 2D code object.
Remedy: This error occurs when an attempt is made to create an object without deleting the old one. This
is a rarely occurring error. There could be a problem with the vision system. Cut and then resupply power
to the machine. If this does not rectify the problem, contact Fuji. Obtain a trace report.
------------------------------
Code: 1CC06002
Display: 1CC06002
Used by:
Cause: Failed to delete the 2D code object.
Remedy: This error occurs when an attempt is made to delete an object when no registered object exists.
This is a rarely occurring error. There could be a problem with the vision system. Cut and then resupply
power to the machine. If this does not rectify the problem, contact Fuji. Obtain a trace report.
------------------------------
第 1210 页
Code: 1CC06003
Display: 1CC06003
Used by:
Cause: 2D code could not be found.
Remedy: Reinspect the image to check whether the 2D code was correctly captured or not.
------------------------------
Code: 1CC06004
Display: 1CC06004
Used by:
Cause: An error occurred during 2D code training. 2D code could not be found.
Remedy: Reinspect the image to check whether the 2D code was correctly captured or not.
------------------------------
Code: 1CC06005
Display: 1CC06005
Used by:
Cause: Security violation occurred.
Remedy: The 2D code reader license key could not be found. Check the license key.
------------------------------
Code: 1CFF0000
Display: Application Error
Used by:
Cause: This error occurs when element data is not transmitted from the MCS because device data names
in the production program are described in both upper and lower letters.
Remedy: Describe them either in upper-case or lower-case letters, or upgrade the MCS software. MCS/2H
V1.20 or later.MCS/2E V.3.10 or later.
------------------------------
Code: 1CFF0001
Display: 1CFF0001
Used by:
Cause: RTX main process failed to start (initialize).
Remedy: Failed to generate or open a resource such as a shared memory, an event, or a semaphore, etc..
This is not a common error. There could be a visionsystem abnormality. Restart the system. Obtain the
trace data and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF0002
Display: 1CFF0002
Used by:
Cause: "NT execution" process failed to start (initialize).
Remedy: Failed to generate or open a resource such as a shared memory, an event, or a semaphore, etc..
This is not a common error. There could be a visionsystem abnormality. Restart the system. Obtain the
trace data and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF0003
Display: 1CFF0003
Used by:
Cause: "RTX execute" process failed to start (initialize).
Remedy: Failed to generate or open a resource such as a shared memory, an event, or a semaphore, etc..
This is not a common error. There could be a visionsystem abnormality. Restart the system. Obtain the
trace data and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF0004
第 1211 页
Display: 1CFF0004
Used by:
Cause: Shared memory failed to open.
Remedy: The shared memory which contains the start conditions for the vision processing process group
failed to open. This is not a common error. There could be a visionsystem abnormality. Restart the
system. Obtain the trace data and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF0005
Display: 1CFF0005
Used by:
Cause: Error at vision processing board.
Remedy: An error reply was received from the Cognex vision processing board. The reply code from the
board is in the ulSubCode. This is not a common error. There could be a visionsystem abnormality.
Restart the system. Obtain the trace data and contact Fuji if this error occurs multiple times.
------------------------------
Code: 1CFF0010
Display: 1CFF0010
Used by:
Cause: The prescribed number of "acquire thread" starts was exceeded, and a vision processing request
occurred.
Remedy: Obtain the vision processing results, and specify the "Idle" mode for the acquire thread.
------------------------------
Code: 1CFF0011
Display: 1CFF0011
Used by:
Cause: Could not connect to the shared memory for vision processing data.
Remedy: An error occurred at the RtOpenSharedMemory(). This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF0012
Display: 1CFF0012
Used by:
Cause: Failed to generate a handling semaphore.
Remedy: An error occurred at the RtCreateSemaphore(). This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF0013
Display: 1CFF0013
Used by:
Cause: Failed to transmit the image acquisition command.
Remedy: An error occurred at ffSendStartTrigAcquireCmd(). The reply value for
ffSendStartTrigAcquireCmd() is in the ulSubCode. This is not a common error. There could be a
visionsystem abnormality. Restart the system. Obtain the trace data and contact Fuji if this error occurs
multiple times.
------------------------------
Code: 1CFF0014
Display: 1CFF0014
Used by:
Cause: Failed to transmit the acquisition area command.
第 1212 页