FUJI错误代码查询.pdf - 第2066页

Cause: Either there is no work directory or there is insufficient RAM. Remedy: Reboot the MCS. ------------------------------ Code: 2100CA19 Display: Sample file open error Used by: Cause: Either there is no work file or…

100%1 / 5282
Display: Help task fork error
Used by:
Cause: Either the help task does not exist or it cannot be started.
Remedy: Re-install the system.
------------------------------
Code: 2100CA11
Display: Err_disp task fork error
Used by:
Cause: Either an error display task does not exist or it cannot be started.
Remedy: Re-install the system.
------------------------------
Code: 2100CA12
Display: Memory full
Used by:
Cause: The memory is full.
Remedy: After completing the present operation, reduce the number of files to be copied.
------------------------------
Code: 2100CA13
Display: Directory open error
Used by:
Cause: The directory does not exist.
Remedy: Ensure that the path specified in the input program is correct.
------------------------------
Code: 2100CA14
Display:
Used by:
Cause: Presently not supported.
Remedy:
------------------------------
Code: 2100CA15
Display: Nozzle data empty
Used by:
Cause: The name of the nozzle assignment table has not been entered in the specified production
program.
Remedy: Specify the name of the nozzle assignment table in the production program.
------------------------------
Code: 2100CA16
Display: Environment file open error
Used by:
Cause: The environment file does not exist.
Remedy: Re-install the system.
------------------------------
Code: 2100CA17
Display: Environment file read error
Used by:
Cause: The environment file has been corrupted.
Remedy: Re-install the system.
------------------------------
Code: 2100CA18
Display: Sample file create error
Used by:
第 2065 页
Cause: Either there is no work directory or there is insufficient RAM.
Remedy: Reboot the MCS.
------------------------------
Code: 2100CA19
Display: Sample file open error
Used by:
Cause: Either there is no work file or it has been corrupted.
Remedy: Quit and then re-open the sample file.
------------------------------
Code: 2100CA1A
Display: Sample file read error
Used by:
Cause: Either there is no work file or it has been corrupted.
Remedy: Quit and then re-open the sample file.
------------------------------
Code: 2100CA1B
Display: Sample file write error
Used by:
Cause: Either there is no work file or it has been corrupted.
Remedy: Quit and then re-open the sample file.
------------------------------
Code: 2100CA1C
Display: Header read error
Used by:
Cause: Either the specified production program has been corrupted or the specified file is not in the Fuji
format.
Remedy: Using the editor, check the production program.
------------------------------
Code: 2100CA1D
Display: Offset read error
Used by:
Cause: Either the specified production program has been corrupted or the specified file is not in the Fuji
format.
Remedy: Using the editor, check the production program.
------------------------------
Code: 2100CA1E
Display: Program file open error
Used by:
Cause: Either the specified production program has been corrupted or the specified file is not in the Fuji
format.
Remedy: Using the editor, check the production program.
------------------------------
Code: 2100CA1F
Display: Program file read error
Used by:
Cause: Either the specified production program has been corrupted or the specified file is not in the Fuji
format.
Remedy: Using the editor, check the production program.
------------------------------
Code: 2100CA20
Display: PD file open error
第 2066 页
Used by:
Cause: Either the specified part data has been corrupted or the specified file is not in the Fuji format.
Remedy: Using the editor, check the part data.
------------------------------
Code: 2100CA21
Display: GD file open error
Used by:
Cause: Either the specified GD data has been corrupted or the specified file is not in the Fuji format.
Remedy: Using the editor, check the GD data.
------------------------------
Code: 2100CA22
Display: Nozzle file open error
Used by:
Cause: Either the specified nozzle assignment table has been corrupted or the specified file is not in the
Fuji format.
Remedy: Using the editor, check the nozzle assignment table.
------------------------------
Code: 2100CA23
Display: Pallet file open error
Used by:
Cause: Either the specified pallet data has been corrupted or the specified file is not in the Fuji format.
Remedy: Using the editor, check the pallet data.
------------------------------
Code: 2100CA24
Display: Format error
Used by:
Cause: The format command cannot be started.
Remedy: Re-install the operating system.
------------------------------
Code: 2100CA25
Display: Input file name doesn't exist
Used by:
Cause: The production program name was not specified.
Remedy: Specify the production program name.
------------------------------
Code: 2100CA26
Display: File not found
Used by:
Cause: One or more of the data files (PD, GD, NAT, or PLT) which are described in the production
program is missing.
Remedy: If a file is missing, either create the file or make the necessary corrections in the production
program.
------------------------------
Code: 2100CA27
Display: File exists
Used by:
Cause: A file with the same name already exists at the destination.
Remedy: Proceed as the message indicates.
------------------------------
Code: 2100CA28
Display: Same device
第 2067 页