FUJI错误代码查询.pdf - 第714页

Code: 12070?02 Display: "ICM(PMC?,SCU?) Error Code:********" (QP2) "Wrong Module Number" (QP2) PM?? ERROR Code:******** (QP132) Used by: QP242,QP201,QP202,QP203,QP132 Cause: The module number is incor…

100%1 / 5282
Cause:
Remedy:
------------------------------
Code: 1206B00A
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1206B00B
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1206B00C
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1206B00D
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 1207?E49
Display: "ICM (PMC?,SCU?) Error Code:********" (QP2)
"Measurement completion command processing error" (QP2)
Coplanarity error(NP2,QP3)
Used by: QP242,NP2,QP3
Cause: The light beam of the LLL may not be interrupted during processing. ? is the module number.
"****" is the error code.(QP2)
Measurement completion command processing error.The laser beam may not have been blocked
during processing.(NP2,QP3)
Remedy: Move the X measurement position a little closer to the LLL.
------------------------------
Code: 12070?01
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Command Error" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: An unsupported command has been received. The command in question may not be available
due to a firmware malfunction, or there may be a error in the command format.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty production program or PMC control board may be the cause.
------------------------------
第 713 页
Code: 12070?02
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Wrong Module Number" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The module number is incorrect.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty production program or PMC control board may be the cause.
------------------------------
Code: 12070?03
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"In Auto Mode" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The command cannot be executed because the machine is operating in automatic mode.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?04
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Servo is ON" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The command cannot be executed because the servo has not been turned off.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?05
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Operating in ST" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The command cannot be executed because the machine is being operated from a handy terminal.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Stop handy terminal operation, or re-execute the command after handy terminal processing is
completed.
------------------------------
Code: 12070?06
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"PMC is Busy" (QP2)
PM?? ERROR Code:******** (QP132)
第 714 页
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The command cannot be executed because the PMC is busy.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?07
Display: "ICM (PMC?, SCU?) Error code: ********" (QP-2)
"Unexecutable(Axis Moving)" (QP2)
"Processing: Cannot execute"(QP132)
PM?? ERROR Code: ******** (QP-132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The command cannot be executed because the axis is moving.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, or restart the machine. If the problem occurs again,
use a reset-start to transmit the control software to the PMCs. If the problem is recurring, issues such as
a faulty PMC control board may be the cause.
------------------------------
Code: 12070?08
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"Nozzle Holding Parts" (QP2)
PM?? ERROR Code:******** (QP132)
Used by: QP242,QP201,QP202,QP203,QP132
Cause: The command cannot be executed because the nozzle is holding a component.
(value replacing "?" is module number; error code appears in place of asterisks)
(value replacing "??" is module number)(QP132)
Remedy: Press the RESET button to clear the error, then use commands to dump parts. If the problem
occurs again, use a reset-start to transmit the control software to the PMCs. If the problem is recurring,
issues such as a faulty PMC control board may be the cause.
------------------------------
Code: 12070?09
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"No Chuck" (QP2)
Used by: QP242,QP201,QP202,QP203
Cause: There is no chuck.
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: This error should not occur under normal conditions.
------------------------------
Code: 12070?0A
Display: "ICM(PMC?,SCU?) Error Code:********" (QP2)
"X-drct pickup tol.error"(QP2)
Used by: QP242
Cause: The amount of pick up misalignment has exceeded the value specified at the part data item,
"Tolerance Pickup X ??".
(value replacing "?" is module number; error code appears in place of asterisks)
Remedy: Check the way the part is picked up or check the validity of part data setting.
------------------------------
Code: 12070?0B
第 715 页