FUJI错误代码查询.pdf - 第2114页

Used by: Cause: The specified file does not exist. Remedy: Specify the correct filename. ------------------------------ Code: 2100FF05 Display: can't create output file Used by: Cause: The output file could not be c…

100%1 / 5282
------------------------------
Code: 2100FE0D
Display: all Nozzle_size and Back_light_size are zero
Used by:
Cause: Nozzle_size and Back_light_size settings are all 0.
Remedy: Check and fix those items.
------------------------------
Code: 2100FE0E
Display: Either Nozzle_size or Back_light_size is zero.
Used by:
Cause: Same as the code.
Remedy: Input data into "Nozzle_size" and "Back_light_size"
------------------------------
Code: 2100FE0F
Display: Set Nozzle_size smaller than Back_light_size.
Used by:
Cause: Same as the code
Remedy: Input a larger value into Back_light_size than Nozzle_size.
------------------------------
Code: 2100FE10
Display: Default value is used if no data is entered.
Used by:
Cause: The program structure and descriptor structure are different.
Remedy: This is a warning. Save and correct the file using the editor.
------------------------------
Code: 2100FF00
Display: can't read strings file
Used by:
Cause: The string file (stat_str.E) could not be loaded into memory.
Remedy: Re-boot MCS. If the error recurs, re-install the system.
------------------------------
Code: 2100FF01
Display: Syntax error - illegal '+' option
Used by:
Cause: The '+' option was used improperly at start-up.
Remedy: If this error was produced by a direct command, correct the command.
------------------------------
Code: 2100FF02
Display: Syntax error - illegal '-' option
Used by:
Cause: The '-' option was used improperly at start-up.
Remedy: If this error was produced by a direct command, correct the command.
------------------------------
Code: 2100FF03
Display: Syntax error - check file not found
Used by:
Cause: The name of the check file was not specified.
Remedy: Specify the filename.
------------------------------
Code: 2100FF04
Display: Check file not found on disk
第 2113 页
Used by:
Cause: The specified file does not exist.
Remedy: Specify the correct filename.
------------------------------
Code: 2100FF05
Display: can't create output file
Used by:
Cause: The output file could not be created.
Remedy: Check the RAM for previously created files and for remaining memory. Re-boot MCS.
------------------------------
Code: 2100FF06
Display: can't create print file
Used by:
Cause: The print file could not be created.
Remedy: Check the RAM for previously created files and for remaining memory. Re-boot MCS.
------------------------------
Code: 2100FF07
Display: change console path error
Used by:
Cause: During operation, the specified terminal path could not be changed.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100FF08
Display: CRT event link error
Used by:
Cause: The terminal could not be event linked.
Remedy: Re-execute the function. If the error recurs, re-boot MCS.
------------------------------
Code: 2100FF09
Display: can't load status file on memory
Used by:
Cause: The specified status file could not be loaded into memory.
Remedy: Re-boot MCS.
------------------------------
Code: 2100FF0A
Display: can't load file descriptor on memory
Used by:
Cause: The file descriptor cannot be loaded into memory.
Remedy: Re-boot MCS. If the error recurs, re-install the system.
------------------------------
Code: 2100FF0B
Display: check file is not a status data file
Used by:
Cause: The specified file is not a status file.
Remedy: Specify a status file.
------------------------------
Code: 2100FF0C
Display: can't open Lp pipe
Used by:
Cause: The Lp pipe cannot be opened.
Remedy: Re-boot MCS.
第 2114 页
------------------------------
Code: 2100FF0D
Display: check flag rewrite error
Used by:
Cause: The check flag could not be rewritten.
Remedy: Check that the file overwrite protector is not set to prevent overwriting.
------------------------------
Code: 2100FF0E
Display: Status data no. **** over
Used by:
Cause: The **** status data item is out of range.
Remedy: Correct the item.
------------------------------
Code: 2100FF0F
Display: '+' option not found
Used by:
Cause: The '+' option could not be found at start-up.
Remedy: If this was specified by direct command, correct the command.
------------------------------
Code: 2100FF10
Display: check flag data read error
Used by:
Cause: The check flag could not be read.
Remedy: If this was specified by direct command, correct the command.
------------------------------
Code: 2100FF11
Display: On_line production report is not supported
Used by:
Cause: The on-line function is not currently supported.
Remedy: Specify local or on_line in the production_report section of Status data.
------------------------------
Code: 2110B175
Display: Part data load error
Used by:
Cause: Unable to load Part data.
Remedy: Check that Part data exists.
------------------------------
Code: 2110B176
Display: Can't expand program data.
Used by:
Cause: Cannot expand program data.
Remedy: Check and correct the production program.
------------------------------
Code: 21200EB0
Display: can't write runlevel_list_file /R0
Used by:
Cause: Data could not be written to the Run Level List file (R0/USER/r_list).
Remedy: Re-boot MCS.
------------------------------
Code: 2200750B
Display: DTX750B error
第 2115 页