FUJI错误代码查询.pdf - 第1862页

Code: 21002102 Display: Filename is protected Used by: Cause: The filename is protected. Remedy: Check the file. ------------------------------ Code: 21002103 Display: Filename is required Used by: Cause: The filename wa…

Cause: There was a tolerance information data read error.

Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.

------------------------------

Code: 21002012

Display: Parts gd information data read error

Used by:

Cause: There was a GD information data read error.

Remedy: Check the Part data file. If the Part data file is correct, re-boot the system.

------------------------------

Code: 21002013

Display: Parts Data read error

Used by:

Cause: Part data cannot be read because it is corrupted.

Remedy: Install the correct disk.

------------------------------

Code: 21002014

Display: Media full

Used by:

Cause: Same as the code.

Remedy: Install a disk which has enough space.

------------------------------

Code: 21002015

Display: Device not ready

Used by:

Cause: Same as the code.

Remedy: Install the correct disk.

------------------------------

Code: 21002016

Display: Bad type media

Used by:

Cause: Same as the code.

Remedy: Check the disk format.

------------------------------

Code: 21002017

Display: Not found

Used by:

Cause: Same as the code

Remedy: Install the correct disk and check the directory.

------------------------------

Code: 21002018

Display: Write protect

Used by:

Cause: Same as the code

Remedy: Release the write protection.

------------------------------

Code: 21002101

Display: Illigal parameter[s]

Used by:

Cause: The startup format was incorrect.

Remedy: Check the input command.

------------------------------

第 1861 页

Code: 21002102

Display: Filename is protected

Used by:

Cause: The filename is protected.

Remedy: Check the file.

------------------------------

Code: 21002103

Display: Filename is required

Used by:

Cause: The filename was not input.

Remedy: Input the filename.

------------------------------

Code: 21002104

Display: Discripter format error

Used by:

Cause: The descriptor format is incorrect.

Remedy: Re-install the descriptor.

------------------------------

Code: 21002105

Display: Cannot memory allocate

Used by:

Cause: Cannot allocate memory

Remedy: If something is being executed in the background, wait until this is finished. If not, re-boot

MCS.

------------------------------

Code: 21002106

Display: Gd file format error

Used by:

Cause: The GD file format is incorrect.

Remedy: Delete the file and re-create it.

------------------------------

Code: 21002107

Display: Discripter not found

Used by:

Cause: The descriptor was not found.

Remedy: Re-install the system.

------------------------------

Code: 21002108

Display: Message file not found

Used by:

Cause: The message file was not found.

Remedy: Re-install the system.

------------------------------

Code: 21002109

Display: Logical error

Used by:

Cause: There was a logical error.

Remedy: Re-boot MCS.

------------------------------

Code: 21002110

Display: I/O error

第 1862 页

Used by:

Cause: There was a system error.

Remedy: Re-boot MCS.

------------------------------

Code: 21002201

Display: Parameter syntax error

Used by:

Cause: The startup parameters were wrong.

Remedy: Re-install the system.

------------------------------

Code: 21002202

Display: Environment File open error

Used by:

Cause: Unable to open the ID file.

Remedy: After entering ":/h0/cmds/del/ h0/mcs2/.sys/idt" from the UCI menu, input ":idg -a".

------------------------------

Code: 21002203

Display: Instance_ID data error (ERROR)

Used by:

Cause: There was no ID number.

Remedy: Input ":idg -a" from the UCI menu.

------------------------------

Code: 21002204

Display: File not found.

Used by:

Cause: The file was not found.

Remedy: Check the input filename.

------------------------------

Code: 21002205

Display: Instance_ID data error (WARNING)

Used by:

Cause: The ID number could not be found.

Remedy: Input ":idg -a" at the UCI menu.

------------------------------

Code: 21003A03

Display: can't get err_file event

Used by:

Cause: A console event could not be set.

Remedy: Start up from the UCI menu.

------------------------------

Code: 21003A04

Display: can't find error file

Used by:

Cause: The error file does not exist.

Remedy: There was no error. If an error occurs an error file will be automatically created.

------------------------------

Code: 21003A05

Display: can't open error file

Used by:

Cause: The error file could not be opened.

Remedy: The file can be destroyed. Execute the next command from the UCI menu, and delete the error

第 1863 页