FUJI错误代码查询.pdf - 第1777页
Display: Used by: Cause: Vision processing could not take a normal image. The upper or lower areas were too uneven or there was foreign matter stuck to the part. Remedy: Check the camera, vision processing board, cable a…
------------------------------
Code: 1D660011
Display:
Used by:
Cause: Unable to detect parts.
Remedy: Check the image taken by vision processing. check the body size X/Y, number of leads and lead
pitch values in Part data.
------------------------------
Code: 1D660012
Display:
Used by:
Cause: The Y length of the part is not within the acceptable range.
Remedy: Check the shape of the part.
------------------------------
Code: 1D660013
Display:
Used by:
Cause: Unable to detect parts.
Remedy: Check the image taken by vision processing. check the body size X/Y, number of leads and lead
pitch values in Part data.
------------------------------
Code: 1D660014
Display:
Used by:
Cause: Unable to detect parts.
Remedy: Check the image taken by vision processing. check the body size X/Y, number of leads and lead
pitch values in Part data.
------------------------------
Code: 1D660015
Display:
Used by:
Cause: Unable to detect parts.
Remedy: Check the image taken by vision processing. check the body size X/Y, number of leads and lead
pitch values in Part data.
------------------------------
Code: 1D660016
Display:
Used by:
Cause: Unable to detect parts.
Remedy: Check the image taken by vision processing. check the body size X/Y, number of leads and lead
pitch values in Part data.
------------------------------
Code: 1D660017
Display:
Used by:
Cause: Vision processing could not take a normal image. The upper or lower areas were too uneven or
there was foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D660018
第 1776 页
Display:
Used by:
Cause: Vision processing could not take a normal image. The upper or lower areas were too uneven or
there was foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D660019
Display:
Used by:
Cause: Vision processing could not take a normal image. The upper or lower areas were too uneven or
there was foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D66001A
Display:
Used by:
Cause: The pickup slippage in the X direction is out of the acceptable range.
Remedy: Check that the part is being picked correctly.
------------------------------
Code: 1D66001B
Display:
Used by:
Cause: The pickup slippage in the Y direction is out of the acceptable range.
Remedy: Check that the part is being picked correctly.
------------------------------
Code: 1D66001C
Display:
Used by:
Cause: Vision processing could not take a normal image. The upper or lower areas were too uneven or
there was foreign matter stuck to the part.
Remedy: Check the camera, vision processing board, cable and focus. Make sure foreign matter is not
stuck to the parts.
------------------------------
Code: 1D668002
Display:
Used by:
Cause: The part was not picked. The nozzle used with this part is too large. Vision processing could not
detect any part.
Remedy: Re-supply parts. If parts were picked and this error occurred, make the nozzle smaller. Lower
the CCD level so that parts can be detected.
------------------------------
Code: 1D668100
Display:
Used by:
Cause: This Computer Vision No. is not supported.
Remedy: Check the Computer Vision No. in Part Data.
------------------------------
Code: 1D668110
Display:
第 1777 页
Used by:
Cause: Lead_pitch (pitch between the lead spaces) in Part data has not been specified.
Remedy: Specify Lead_pitch in Part data.
------------------------------
Code: 1D668111
Display:
Used by:
Cause: Lead_width in Part data has not been specified.
Remedy: Specify Lead_width in Part data.
------------------------------
Code: 1D668112
Display:
Used by:
Cause: Lead_length_x in Part data has not been specified.
Remedy: Specify Lead_length_x in Part data.
------------------------------
Code: 1D668113
Display:
Used by:
Cause: Lead_length_y in Part data has not been specified.
Remedy: Specify Lead_length_y in Part data.
------------------------------
Code: 1D668114
Display:
Used by:
Cause: Body_size_1 (body length in the X direction) in Part data has not been specified.
Remedy: Specify Body_size_1 in Part data.
------------------------------
Code: 1D668115
Display:
Used by:
Cause: Body_size_0 (body length in the Y direction) in Part data has not been specified.
Remedy: Specify Body_size_0 in Part data.
------------------------------
Code: 1D668120
Display:
Used by:
Cause: Qty_0 (the number of leads on the left side) in Part data has not been specified.
Remedy: Specify Qty_0.
------------------------------
Code: 1D668121
Display:
Used by:
Cause: Qty_1 (the number of leads on the lower side) in Part data has not been specified.
Remedy: Specify Qty_1.
------------------------------
Code: 1D668122
Display:
Used by:
Cause: Qty_2 (the number of leads on the right side) in Part data has not been specified.
Remedy: Specify Qty_2.
第 1778 页