FUJI错误代码查询.pdf - 第1882页

and Status data. Remedy: Except on the above mentioned data, data check cannot be performed. Save the changes and shut down the editor. ------------------------------ Code: 21005310 Display: File already exists Used by: …

100%1 / 5282
Cause: There was a syntax error.
Remedy: Check the command and try to input it again.
------------------------------
Code: 21005301
Display: Comment must be enclosed by quotation marks (") in direct co
Used by:
Cause: Comments entered when setting the command must be enclosed in quotation marks.
Remedy: Enclose comments in quotation marks.
------------------------------
Code: 21005302
Display: Nickname must be enclosed by quotation marks (") in direct c
Used by:
Cause: A comment not enclosed in quotation marks (") was found when the [end] command was
executed.
Remedy: Insert quotation marks before and after the comment.
------------------------------
Code: 21005303
Display: END command not selected
Used by:
Cause: The F6 [execute] key was pressed before specifying the method of ending the Editor.
Remedy: Select the end method with the cursor keys before pressing the [execute] key.
------------------------------
Code: 21005304
Display: Number of Device data lines is incorrect
Used by:
Cause: When copying in editor or using insert_line, the number of device data lines is incorrect so the
machine attempted to save the file.
Remedy: After altering the number of device data lines to the correct number, save the file.
------------------------------
Code: 21005305
Display: File already exists
Used by:
Cause: The specified file already exists.
Remedy: Either save the file by overwriting whatever is on the other file or change the filename.
------------------------------
Code: 21005306
Display: Now edit file record count over Not execute File save
Used by:
Cause: The file size is too big and cannot be saved.
Remedy: Change the file so that it is within the specified size.
------------------------------
Code: 21005308
Display: file saving error
Used by:
Cause: The temporary file already exists.
Remedy: Turn off the computer power and re-boot the computer.
------------------------------
Code: 21005309
Display: Data checker not execute. (data type error)
Used by:
Cause: An attempt was made to perform file save and data check on items not in the program, Proper
第 1881 页
and Status data.
Remedy: Except on the above mentioned data, data check cannot be performed. Save the changes and
shut down the editor.
------------------------------
Code: 21005310
Display: File already exists
Used by:
Cause: The file specified already exists.
Remedy: Choose whether or not to overwrite the file.
------------------------------
Code: 21005311
Display: Filename not specified
Used by:
Cause: The filename was not specified in the command.
Remedy: Specify the filename.
------------------------------
Code: 21005320
Display: Start_line or End_line not selected
Used by:
Cause: The line was not specified at "blk wrte."
Remedy: After entering the correct starting and finishing line, press the F6 [execute] key.
------------------------------
Code: 21005321
Display: Start_line or End_line record count over
Used by:
Cause: The specified line specified in the blk wrte command does not exist.
Remedy: After checking that the correct starting and finishing lines are specified, re-execute the function.
------------------------------
Code: 21005322
Display: Not "Block" or "Sequence" data
Used by:
Cause: The digitize command was executed for data other than block or sequence data.
Remedy: The digitize command can only be executed on the above mentioned data.
------------------------------
Code: 21005330
Display: Record Field Over
Used by:
Cause: When a read command was executed, the number of data items read exceeded the number able
to be handled by the software.
Remedy: Reduce the number of data items being read.
------------------------------
Code: 21005331
Display: Selected file is not a block data file.
Used by:
Cause: The selected file is not a block data file.
Remedy: Check the block data display contents. Check that "BLOCK" is displayed under the "TYPE"
heading in the ls directory display.
------------------------------
Code: 21005332
Display: Block read data does not match data block format.
Used by:
第 1882 页
Cause: The set file data field does not match the format of the data field.
Remedy: Change either the file or the format. Select F3 to check the data.
------------------------------
Code: 21005333
Display: Selected file not found
Used by:
Cause: The filename does not exist.
Remedy: Select F1 for a directory of files.
------------------------------
Code: 21005350
Display: Generic device editor open error.
Used by:
Cause: The generic device editor will not operate. The generic device editor module does not exist.
Remedy: Install the generic device editor.
------------------------------
Code: 21005390
Display: Failed to create geniric device.
Used by:
Cause: A generic device file could not be created.
Remedy: Check Part data.
------------------------------
Code: 21005400
Display: Index not found
Used by:
Cause: The index was not found when inputting items.
Remedy: Input the index again, and re-execute.
------------------------------
Code: 21005401
Display: Editor descriptor index not found.
Used by:
Cause: The editor descriptor index was not found.
Remedy: Check the index guide and re-execute.
------------------------------
Code: 21005402
Display: This file is not a program file.
Used by:
Cause: This file is not a production program or source program.
Remedy: Select C with the command key. Only these production or source programs can be used.
------------------------------
Code: 21005403
Display: Select index not used not execute line command.
Used by:
Cause: An index error occurred.
Remedy: Re-install the editor software.
------------------------------
Code: 21005404
Display: Srch data not found
Used by:
Cause: The specified data was not found.
Remedy: Check the data.
------------------------------
第 1883 页