FUJI错误代码查询.pdf - 第98页

Code: 1101D05A Display: Used by: CP5,CP6,CP6M,CP65,CP642,CP643 Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +- 2.8mm. if the sixth …

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

Code: 1101D056

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the

transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the

transmitted program exceeds this range.

CP5(D84-97)

CP-6/6M/65,CP-642(D79-91)

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

Code: 1101D057

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the

transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the

transmitted program exceeds this range.

CP5(D98-111)

CP-6/6M/65,CP-642(D92-104)

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

Code: 1101D058

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the vAlue is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the

transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the

transmitted program exceeds this range.

CP5(D112-125)

CP-6/6M/65,CP-642(D105-117)

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

Code: 1101D059

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the

transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the

transmitted program exceeds this range.

CP5(D126-139)

CP-6/6M/65,CP-642(D118-130)

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

第 97 页

Code: 1101D05A

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the value is

+-5.0mm. For the CP5,device 1 or 30 in a pallet in the transmitted program exceeds this range. For the

CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the transmitted program exceeds this range.

CP5(D140-153)

CP-6/6M/65,CP-642(D131-140)

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

Code: 1101D05B

Display:

Used by: CP5

Cause: If bit 6 of machine_status_B is set to zero, D_offset_CP for pallet device 1 or 30 must be between -

2.8 mm and +2.8 mm. If bit 6 of machine_status_B is set to one, D_offset_CP for pallet device 1 or 30

must be between -5.0 mm and +5.0 mm. This value has been exceeded (devices 154~167 on the CP5).

Remedy: Check the values in D_offset_CP.

------------------------------

Code: 1101D05C

Display:

Used by: CP5

Cause: If bit 6 of machine_status_B is set to zero, D_offset_CP for pallet device 1 or 30 must be between -

2.8 mm and +2.8 mm. If bit 6 of machine_status_B is set to one, D_offset_CP for pallet device 1 or 30

must be between -5.0 mm and +5.0 mm. This value has been exceeded (devices 168~181 on the CP5).

Remedy: Check the values in D_offset_CP.

------------------------------

Code: 1101D05D

Display:

Used by: CP5

Cause: If bit 6 of machine_status_B is set to zero, D_offset_CP for pallet device 1 or 30 must be between -

2.8 mm and +2.8 mm. If bit 6 of machine_status_B is set to one, D_offset_CP for pallet device 1 or 30

must be between -5.0 mm and +5.0 mm. This value has been exceeded (devices 182~195 on the CP5).

Remedy: Check the values in D_offset_CP.

------------------------------

Code: 1101D05E

Display:

Used by: CP5

Cause: If bit 6 of machine_status_B is set to zero, D_offset_CP for pallet device 1 or 30 must be between -

2.8 mm and +2.8 mm. If bit 6 of machine_status_B is set to one, D_offset_CP for pallet device 1 or 30

must be between -5.0 mm and +5.0 mm. This value has been exceeded (devices 196~209 on the CP5).

Remedy: Check the values in D_offset_CP.

------------------------------

Code: 1101D05F

Display:

Used by: CP5

Cause: If bit 6 of machine_status_B is set to zero, D_offset_CP for pallet device 1 or 30 must be between -

2.8 mm and +2.8 mm. If bit 6 of machine_status_B is set to one, D_offset_CP for pallet device 1 or 30

must be between -5.0 mm and +5.0 mm. This value has been exceeded (devices 210 on the CP5).

Remedy: Check the values in D_offset_CP.

第 98 页

------------------------------

Code: 1101D060

Display:

Used by: CP652C,IP3

Cause: If the part is placed at the specified pressure, the nozzle stroke goes out of range.

Remedy: Specify a nozzle (in Part data) which has a weak spring pressure. Adjust the pressure value in

Part data downwards. Adjust the pressure origin sensor.

------------------------------

Code: 1101D070

Display:

Used by: CP652C,IP3

Cause: On the FLT or the FIP3, in device data check, there is a device to be used for which there is no

nozzle that can be used. This error refers to device numbers 1 to 50.

Remedy: Use nozzles that can pick and place parts from the device in question, or

change17.Nozzle_size_max, 18.N0zzle_size_min or 24.Nozzle_name in Part data's Carrying_data.

------------------------------

Code: 1101D071

Display:

Used by: CP652C

Cause: On the FLT or the FIP3, in device data check, there is a device to be used for which there is no

nozzle that can be used. This error refers to device numbers 51 to 100.

Remedy: Use nozzles that can pick and place parts from the device in question, or

change17.Nozzle_size_max, 18.Nozzle_size_min or 24.Nozzle_name in Part data's Carrying_data.

------------------------------

Code: 1101D072

Display:

Used by: CP652C

Cause: On the FLT or the FIP3, in device data check, there is a device to be used for which there is no

nozzle that can be used. This error refers to device numbers 101 to 300.

Remedy: Use nozzles that can pick and place parts from the device in question, or

change17.Nozzle_size_max, 18.Nozzle_size_min or 24.Nozzle_name in Part data's Carrying_data.

------------------------------

Code: 1101D073

Display:

Used by: CP652C,IP3

Cause: On the FLT or the FIP3, in device data check, there is a device to be used for which there is no

nozzle that can be used. This error refers to device numbers 301 to 500.

Remedy: Use nozzles that can pick and place parts from the device in question, or

change17.Nozzle_size_max, 18.Nozzle_size_min or 24.Nozzle_name in Part data's Carrying_data.

------------------------------

Code: 1101D074

Display:

Used by: CP652C,IP3

Cause: The component height has not been specified in Part data. This error refers to device numbers 1

to 50.

Remedy: Specify the correct value in 1.Component_height in Part data's Package_and_appearance_data.

------------------------------

Code: 1101D075

Display:

Used by:

Cause: The component height has not been specified in Part data. This error refers to device numbers 51

第 99 页