FUJI错误代码查询.pdf - 第96页

transmitted program exceeds this range. CP5(D14-27) CP-6/6M/65,CP-642(D14-26) Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part data item "D_ofst_x"…

Used by: CP4-3

Cause: The specified diameter of the background disk is smaller than the value in Part data's

Back_light_min (devices 154~167 on the CP5).

Remedy: Input an appropriate nozzle size and retransmit.

------------------------------

Code: 1101D04C

Display:

Used by: CP4-3

Cause: The specified diameter of the background disk is smaller than the value in Part data's

Back_light_min (devices 168~181 on the CP5).

Remedy: Input an appropriate nozzle size and retransmit.

------------------------------

Code: 1101D04D

Display:

Used by:

Cause: The specified diameter of the background disk is smaller than the value in Part data's

Back_light_min (devices 182~195 on the CP5).

Remedy: Input an appropriate nozzle size and retransmit.

------------------------------

Code: 1101D04E

Display:

Used by:

Cause: The specified diameter of the background disk is smaller than the value in Part data's

Back_light_min (devices 196~209 on the CP5).

Remedy: Input an appropriate nozzle size and retransmit.

------------------------------

Code: 1101D04F

Display:

Used by:

Cause: The specified diameter of the background disk is smaller than the value in Part data's

Back_light_min (device 210 on the CP5).

Remedy: Input an appropriate nozzle size and retransmit.

------------------------------

Code: 1101D050

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the

transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the

transmitted program exceeds this range.

CP5(D1-13)

CP-6/6M/65,CP-642(D1-13)

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

Code: 1101D051

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the

transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the

第 95 页

transmitted program exceeds this range.

CP5(D14-27)

CP-6/6M/65,CP-642(D14-26)

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

Code: 1101D052

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the

transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the

transmitted program exceeds this range.

CP5(D28-41)

CP-6/6M/65,CP-642(D27-39)

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

Code: 1101D053

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the

transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the

transmitted program exceeds this range.

CP5(D42-55)

CP-6/6M/65,CP-642(D40-52)

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

Code: 1101D054

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the

transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the

transmitted program exceeds this range.

CP5(D56-69)

CP-6/6M/65,CP-642(D53-65)

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

Code: 1101D055

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the

transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the

transmitted program exceeds this range.

CP5(D70-83)

CP-6/6M/65,CP-642(D66-78)

第 96 页

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

Code: 1101D056

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the

transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the

transmitted program exceeds this range.

CP5(D84-97)

CP-6/6M/65,CP-642(D79-91)

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

Code: 1101D057

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the

transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the

transmitted program exceeds this range.

CP5(D98-111)

CP-6/6M/65,CP-642(D92-104)

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

Code: 1101D058

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the vAlue is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the

transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the

transmitted program exceeds this range.

CP5(D112-125)

CP-6/6M/65,CP-642(D105-117)

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

Code: 1101D059

Display:

Used by: CP5,CP6,CP6M,CP65,CP642,CP643

Cause: if the sixth bit of "Machine_Status B" is set to "0",the part data item"D_ofst_x" value range is +-

2.8mm. if the sixth bit is set to "1",the value is +-5.0mm. For the CP5,device 1 or 30 in a pallet in the

transmitted program exceeds this range. For the CP-6/6M/65 or CP-642, device 1, 70, 71, or 140 in the

transmitted program exceeds this range.

CP5(D126-139)

CP-6/6M/65,CP-642(D118-130)

Remedy: Check the value for the sixth bit in the Proper data item "Machine_Status B" and for the part

data item "D_ofst_x".

------------------------------

第 97 页