FUJI错误代码查询.pdf - 第1159页

Used by: NXTP Cause: 从前道工序到换乘传感器或者电路板到达传感器为止电路板没有到达。 Remedy: １．请确认搬运轨道间的电路板载入是否顺畅。 ２．请确认换乘传感器(RX0A0,RX0A1)、电路板到达传感器(RX0A2)能正常检测电路板。 <img src="$LKEY_ERRIMG_MC$/15040A02.PNG"> ------------------------------…

100%1 / 5282
through sensor at the in-conveyor end.
Remedy: Check the X068: P.IN ARRV CK operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040885
Display: UNLD-CHGMODULE CHANGE TUP
Loader error: 15040885
Used by: QP132
Cause: The pallet did not activate the unloading pallet interlock when it was moved from the pallet
unloader to the changeover module.
Remedy: Check the X027: P.OUT INTERLCK operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040886
Display: CHGMODULE-UNLD CHANGE TUP
Loader error: 15040886
Used by: QP132
Cause: The pallet did not activate the unloading pallet interlock when it was moved from the changeover
module to the pallet unloader.
Remedy: Check the X027: P.OUT INTERLCK operation using I/O commands and adjust if necessary.
------------------------------
Code: 15040887
Display: Chgst Bar Ext Pos Error
Loader error: 15040887
Used by: QP132
Cause: The change station bar has not reached its extended position in the time allowed.
Remedy: Check the operation of the change station bar with I/O X06C: CHG BAR FWEND and make any
necessary adjustments.
------------------------------
Code: 15040888
Display: Chgst Bar Ret Pos Error
Loader error: 15040888
Used by: QP132
Cause: The change station bar has not reached its retract position in the time allowed.
Remedy: Check the operation of the change station bar with I/O X06C: CHG BAR BWEND and make any
necessary adjustments.
------------------------------
Code: 15040901
Display: Abolished.
Used by: QP122
Cause: Abolished.
Remedy: Abolished.
------------------------------
Code: 15040A01
Display: 电路板载入异常　往复臂L
Used by: NXTP
Cause: 从前道工序到换乘传感器或者电路板到达传感器为止电路板没有到达。
Remedy: １．请确认搬运轨道间的电路板载入是否顺畅。
２．请确认换乘传感器(RX080,RX081)，电路板到达传感器(RX082)能正常检测电路板。
<img src="$LKEY_ERRIMG_MC$/15040A01.PNG">
------------------------------
Code: 15040A02
Display: 电路板载入异常　往复臂R
第 1158 页
Used by: NXTP
Cause: 从前道工序到换乘传感器或者电路板到达传感器为止电路板没有到达。
Remedy: １．请确认搬运轨道间的电路板载入是否顺畅。
２．请确认换乘传感器(RX0A0,RX0A1)、电路板到达传感器(RX0A2)能正常检测电路板。
<img src="$LKEY_ERRIMG_MC$/15040A02.PNG">
------------------------------
Code: 15040B01
Display: 通道2 电路板搬运异常
Used by: NXTP
Cause: 电路板搬运超时。
电路板在中途停止或者落下了。
Remedy: 请从通道2取出电路板。
不关闭门时不能解除此错误。
<img src="$LKEY_ERRIMG_MC$/15040B01.PNG">
------------------------------
Code: 15040B02
Display: 通道2 电路板排出异常
Used by: NXTP
Cause: 虽然从通道２送出了电路板，但是往复臂的电路板到达传感器没有在规定时间内成为电路板到达状态。
Remedy: 请检查是否在搬运轨道上有被卡住的电路板。
不打开前门进行电路板的有无确认时，不能解除错误。
<img src="$LKEY_ERRIMG_MC$/15040B02.PNG">
------------------------------
Code: 15040B03
Display: 通道2 变更宽度时有电路板错误
Used by: NXTP
Cause: 变更宽度时有电路板。
Remedy: 请取出电路板。
<img src="$LKEY_ERRIMG_MC$/15040B03.PNG">
------------------------------
Code: 15040B04
Display: 电路板载入异常　通道２
Used by: NXTP
Cause: 从前道工序到换乘到传感器为止电路板没有到达。
Remedy: １．请确认搬运轨道间的电路板载入是否顺畅。
２．请确认换乘传感器(RX063)能正常检测电路板。
<img src="$LKEY_ERRIMG_MC$/15040B04.PNG">
------------------------------
Code: 15040B05
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 15040B06
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 15040B07
第 1159 页
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 15040B08
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 15040B09
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 15040B0A
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 15040B0B
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 15040B0C
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 15040B0D
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 15040B0E
Display:
Used by:
Cause:
Remedy:
------------------------------
Code: 15040B0F
Display:
Used by:
Cause:
第 1160 页