FUJI错误代码查询.pdf - 第460页

Remedy: Ensure there is no overlapping of settings (i.e., the same port is used for connection to more than one peripheral) and that all Proper data settings are within the acceptable range. Also check that the 6 channel…

100%1 / 5282
Display: SMI creation error
Used by:
Cause: An error occurred due to a lack of memory and duplicated settings when the TC8577 (SMI) driver
was generated. This error occurred when Fuji OS system call_create_smi() was used. The last number in
the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203724?
Display: SMI DBG creation error
Used by:
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate debugger MC8577 (ACIA). This error occurred when Fuji OS system call_create_smi_d() was
used. The last number in the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203725?
Display: ARCNET creation error
Used by: CP3,CP5,QP242,QP201,QP202,QP203
Cause: An error occurred due to a lack of memory and duplicated settings when the ARCNET driver was
generated. This error occurred when Fuji OS system call_create_arcnet() was used. The last number in
the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203726?
Display: PIA PRN creation error
Used by: CP642,CP643
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
create the driver for the PIA (MC6821) printer port. This error occurred when Fuji OS system
call_create_pia_prn() was used. The last number in the error code indicates the unit in which the error
occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203727?
Display: SECS/GEM creation error
Used by: CP642,CP643,QP242,QP201,QP202,QP203,GP6
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate the SECS/GEM driver. This error occurred when Fuji OS system call_create_vme132() was used.
The last number in the error code indicates the unit number in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 1203728?
Display: VM1440 creation error
Used by: CP3,CP4-1,CP4-2,CP4-3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP132
Cause: The machine control software failed to boot up the first 6 channel communications board. This
may be caused by insufficient memory or overlapping settings for that board. The final digit of the error
code indicates the device in question.
第 459 页
Remedy: Ensure there is no overlapping of settings (i.e., the same port is used for connection to more
than one peripheral) and that all Proper data settings are within the acceptable range. Also check that the
6 channel board (VM1440/FH1016) is in correct working order.
------------------------------
Code: 1203729?
Display: VM1440 creation error
Used by: CP3,CP4-1,CP4-2,CP4-3,CP5,GL541,GP551,GP6,QP132
Cause: The machine control software failed to boot up the second 6 channel communications board.
This may be caused by insufficient memory or overlapping settings for that board. The final digit of the
error code indicates the device in question.
Remedy: Ensure there is no overlapping of settings (i.e., the same port is used for connection to more
than one peripheral) and that all Proper data settings are within the acceptable range. Also check that the
6 channel board (VM1440/FH1016) is in correct working order.
------------------------------
Code: 120372A?
Display: VME070 creation error
Used by: CP3,CP4-1,CP4-2,CP5
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate the first driver for the 4 channel communication board. This error occurred when Fuji OS
system call_create_070() was used. The last number in the error code indicates the unit number in which
the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 120372B?
Display: VME070 creation error
Used by: CP3,CP4-1,CP4-2,CP5
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate the second driver for the 4 channel communication board. This error occurred when Fuji OS
system call_create_070() was used. The last number in the error code indicates the unit number in which
the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 120372C?
Display: LCU ARCNET creation error
Used by:
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate the ARCNET driver for LCU. This error occurred when Fuji OS system call_create_lcuarc() was
used. The last number in the error code indicates the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 120372D?
Display: COM20020B creation error
Used by: QP242,QP201,QP202,QP203
Cause: The ARCNET driver could not be generated by the FUJI OS System Call_create_20020B() in the
machine software's internal processing due to a problem such as insufficient memory or multiple settings.
The last digit of the error code represents the number of units whose generation was attempted. (?
represents the unit number.)
Remedy: Boot up the machine using the reset-start procedure. If the machine still does not work properly
第 460 页
or if this problem occurs often, contact Fuji.
------------------------------
Code: 120372E?
Display: ETHERNET creation error
Used by: CP3
Cause: In conjunction with the internal processing of the machine software, an attempt was made to
create an Ethernet driver using the _create_ether() system call of the Fuji operation system. However,
creation of the Ethernet driver was not successful because of insufficient memory. The last digit in the
error code indicates the number of the unit for which creation was attempted (?: indicatesthe unit
number).
Remedy: Reboot the machine using the reset-start procedure. If operation works properly after the reset-
start then wait in this status for several minutes. Consult Fuji if nothing changes even after a reset-start
is carried out or if the same type of symptoms occur frequently.
------------------------------
Code: 120373??
Display: MT LINK creation error
Used by: CP3,CP4-1,CP4-2,CP4-
3,CP5,CP6,CP6M,CP65,CP652C,CP642,CP643,GL541,GP551,GP6,QP242,QP201,QP202,QP203
Cause: An error occurred when an attempt was made to generate a unit control block and a link for the
carriage return terminate communication module. This error occurred when Fuji OS system call_mt_link()
was used. The last two numbers in the error code indicate the unit in which the error occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 120374??
Display: IP LINK creation error
Used by: CP3,CP5,QP242,QP201,QP202,QP203
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate the unit control block (UCB) in the IP module. This error occurred when Fuji OS system
call_ip_link() was used. The last two numbers in the error code indicate the unit in which the error
occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 120375??
Display: UDP LINK creation error
Used by: CP3,CP5
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
generate the unit control block (UCB) in the UDP module. This error occurred when Fuji OS system
call_udp_link() was used. The last two numbers in the error code indicate the unit in which the error
occurred.
Remedy: Press RESET and then resume operation. If this error occurs frequently or cannot be corrected,
notify Fuji.
------------------------------
Code: 120376??
Display: UDP BIND creation error
Used by: CP3,CP5
Cause: An error occurred due to a lack of memory and duplicated settings when an attempt was made to
branch and generate the unit for the UDP module. This error occurred when Fuji OS system
call_udp_bind() was used. The last two numbers in the error code indicate the unit in which the error
occurred.
第 461 页