FUJI错误代码查询.pdf - 第1075页
Code: 14010010 Display: err0010 Used by: GL2,GL5,GSP2,GSP3,IP1 Cause: When performing vision processing using an intersecting squares fiducial mark, a mark smaller than the fiducial mark was discovered. Remedy: Check the…
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010007
Display: err0007
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The perimeter of the fiducial mark is too small.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010008
Display: err0008
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: Processing interrupted as the perimeter of the fiducial mark is too large.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010009
Display: err0009
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: Noise was discovered (small areas with the same color as the mark) but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000A
Display: err000A
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: Small areas with the same color as the mark were discovered but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000B
Display: err000B
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: Small areas with the same color as the mark were discovered but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000C
Display: err000C
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: An area larger than the fiducial mark of the opposite color from the mark was found but no mark
could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000D
Display: err000D
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: An area with the opposite color of the mark was discovered but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 1401000E
Display: err000E
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: An area with the opposite color of the mark was discovered but no mark could be found.
Remedy: Check the CCD level and the program Mark data.
------------------------------
第 1074 页
Code: 14010010
Display: err0010
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: When performing vision processing using an intersecting squares fiducial mark, a mark smaller
than the fiducial mark was discovered.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010014
Display: err0014
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The mark is too large in the X direction.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010015
Display: err0015
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The mark is too big in the X direction.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010016
Display: err0016
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The mark is too small in the X direction.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010017
Display: err0017
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The mark is too big in the Y direction.
Remedy: Check the CCD level and the program Mark data.
------------------------------
Code: 14010018
Display: err0018
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The mark is too small in the Y direction.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010050
Display: err0050
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The distance from the center to the top of the mark exceeds +-20% of the input value.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010051
Display: err0051
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The distance from the center to the bottom of the mark exceeds +-20% of the input value.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010052
Display: err0052
第 1075 页
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The distance from the center to the left side of the mark exceeds +-20% of the input value.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010053
Display: err0053
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The distance from the center to the right side of the mark exceeds +-20% of the input value.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010054
Display: err0054
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The first mark detected is the same color as the mark color set with header data's Black/White
but the boundary (the borderline between the mark and the background) cannot be detected.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010055
Display: err0055
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The first mark detected is the same color as the mark color set with header data's Black/White
but the boundary (the borderline between the mark and the background) cannot be detected.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010056
Display: err0056
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The first mark detected is the same color as the mark color set with header data's Black/White
but the boundary (the borderline between the mark and the background) cannot be detected.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010057
Display: err0057
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The mark's size in the X direction (Size_a) exceeds 10% of the input value.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010058
Display: err0058
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The mark's size in the Y direction (Size_a) exceeds 10% of the input value.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010060
Display: err0060
Used by: GL2,GL5,GSP2,GSP3,IP1
Cause: The slope of the mark in the X direction exceeds +-10% of Size_b.
Remedy: Check the CCD level and the program mark data.
------------------------------
Code: 14010061
Display: err0061
第 1076 页