FUJI错误代码查询.pdf - 第2033页

Code: 2100B1AC Display: not enough memory ! Used by: Cause: The command cannot execute because of a shortage of memory. Remedy: Execute the command after other commands are finished. ------------------------------ Code: …

Code: 2100B1A4

Display: Device error file creat error

Used by:

Cause: Unable to create the device error file.

Remedy: Evaluate and correct the file. If the RAM disk has not enough free memory, shorten the

evaluation time.

------------------------------

Code: 2100B1A5

Display: Device error file open error

Used by:

Cause: Unable to open the device error file.

Remedy: Evaluate and correct the file.

------------------------------

Code: 2100B1A6

Display: Device error file read error

Used by:

Cause: Unable to read the device error file.

Remedy: Evaluate and correct the file.

------------------------------

Code: 2100B1A7

Display: Device error file write error

Used by:

Cause: Unable to write to the device error file.

Remedy: Evaluate and correct the file.

------------------------------

Code: 2100B1A8

Display: History print file creat error.

Used by:

Cause: The history print file could not be created due to a lack of RAM.

Remedy: Re-execute the function. If the problem recurs, re-boot MCS.

------------------------------

Code: 2100B1A9

Display: History print file write error.

Used by:

Cause: The history print file could not be written to due to a lack of RAM.

Remedy: Re-execute the function. If the problem recurs, re-boot MCS.

------------------------------

Code: 2100B1AA

Display: command error

Used by:

Cause: The command could not be executed.

Remedy: Check that the file partitions are in execution format. Check that the file exists. If it does not,

re-install the software.

------------------------------

Code: 2100B1AB

Display: Loading error occurred - program may be destroyed!

Used by:

Cause: Too many commands are being executed in the program. The command cannot be executed.

Remedy: Re-execute the function. If the error recurs, wait for the other commands to finish. Then

execute the function.

------------------------------

第 2032 页

Code: 2100B1AC

Display: not enough memory !

Used by:

Cause: The command cannot execute because of a shortage of memory.

Remedy: Execute the command after other commands are finished.

------------------------------

Code: 2100B1AD

Display: not found.

Used by:

Cause: The command does not exist.

Remedy: Check that the command was input correctly.

------------------------------

Code: 2100B1B3

Display: Undecided nozzle size for FCP6.

Used by:

Cause: An attempt was made to acquire a nozzle number from the nozzle assignment table but the nozzle

size set in Part data could not be found.

Remedy: Return to the nozzle assignment table, the Part data and the production program used during

production and then re-execute the Analyzer.

------------------------------

Code: 2100B1B4

Display: Coplanarity display file create error.

Used by:

Cause: The directory for creating the file used to display the results of the coplanarity check does not

exist.

Remedy: After completing the operation presently being executed, select "NO" at the analyzer screen to

end. Return to the UCI screen and re-execute the analyzer.

------------------------------

Code: 2100B1B5

Display: Coplanarity display file open error.

Used by:

Cause: The file for displaying the coplanarity check results cannot be opened.

Remedy: At the analyzer screen select "NO" to end, return to the UCI screen, and re-execute the analyzer.

------------------------------

Code: 2100B1B6

Display: Coplanarity display file read error.

Used by:

Cause: The file for displaying the coplanarity check results cannot be read.

Remedy: Select "NO" to end at the analyzer screen, return to the UCI screen, and re-execute the analyzer.

------------------------------

Code: 2100B1B7

Display: Coplanarity display file write error.

Used by:

Cause: Data cannot be written to the file for displaying the results of the coplanarity check.

Remedy: After completing the operation presently being executed, select "NO" at the analyzer screen to

end. Return to the UCI screen and re-execute the analyzer. Alternatively shorten the time frame being

analyzed.

------------------------------

Code: 2100B1B8

Display: Mainte coplanarity work file create error.

Used by:

第 2033 页

Cause: The coplanarity check work file for maintenence could not be created.

Remedy: Select "NO" to end at the Analyzer screen and then re-execute the Analyzer. If the error recurs

reset the MCS.

------------------------------

Code: 2100B1B9

Display: Mainte coplanarity work file open error.

Used by:

Cause: The coplanarity check work file for maintenance could not be opened.