FUJI错误代码查询.pdf - 第2084页

Display: can't read runlevel_list_file /R0 Used by: Cause: The Run Level List file (R0/USER/r_list) could not be read. Remedy: Re-boot MCS. ------------------------------ Code: 2100EB44 Display: can't fork runl…

100%1 / 5282
Remedy: Create a run level list file (password, r_list). It is not a problem if there is no file.
------------------------------
Code: 2100EB02
Display: can't find ranlevel_list file /H0
Used by:
Cause: Unable to find the run level list file.
Remedy: Create a run level list file (password, r_list). It is not a problem if there is no file.
------------------------------
Code: 2100EB03
Display: can't open runlevel_list_file /R0
Used by:
Cause: The Run Level List file (R0/USER/r_list) could not be opened.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EB04
Display: can't read runlevel_list_file /H0
Used by:
Cause: The Run Level List file (H0/USER/SYS/r_list) could not be read.
Remedy: Create a run level list file (password, r_list).
------------------------------
Code: 2100EB05
Display: can't allocate runlevel_list_data area
Used by:
Cause: Not possible to allocate sufficient memory area.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EB06
Display: can't write runlevel_list_file /H0
Used by:
Cause: Data could not be written to the Run Level List file (H0/USER/SYS/r_list).
Remedy: Re-execute the function from the beginning.
------------------------------
Code: 2100EB07
Display: can't write runlevel_list_file /R0
Used by:
Cause: Runlevel list file (R0) cannot be executed.
Remedy: Reboot MCS.
------------------------------
Code: 2100EB08
Display:
Used by:
Cause: Unable to expand the string file.
Remedy: Re-install the software.
------------------------------
Code: 2100EB41
Display: can't open runlevel_list_file /R0
Used by:
Cause: The run level List file (R0/USER/r_list) could not be opened.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EB43
第 2083 页
Display: can't read runlevel_list_file /R0
Used by:
Cause: The Run Level List file (R0/USER/r_list) could not be read.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EB44
Display: can't fork runlevel_change_process
Used by:
Cause: The function to change the run level could not be started up.
Remedy: Re-execute the function. If the error recurs, re-install the software.
------------------------------
Code: 2100EB46
Display: can't read level data /R0
Used by:
Cause: The file cannot be read because it has been damaged or destroyed.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EB47
Display: can't level data file seek /R0
Used by:
Cause: The file cannot be read because it has been damaged or destroyed.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EB48
Display: can't level data file open /R0
Used by:
Cause: The file cannot be read because it has been damaged or destroyed.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EB49
Display: can't level data file write /R0
Used by:
Cause: There is not enough RAM disk memory, or the file has been destroyed.
Remedy: Reboot MCS.
------------------------------
Code: 2100EB80
Display: illegal option
Used by:
Cause: The start-up parameters are incorrect.
Remedy: Correct the input command if this error occurred due to a direct command.
------------------------------
Code: 2100EB81
Display: can't set named pipe
Used by:
Cause: The named pipe for the terminal could not be set.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EB82
Display: String file expand error
Used by:
Cause: A string file could not be expanded.
第 2084 页
Remedy: Re-install the software.
------------------------------
Code: 2100EB83
Display: can't open password file
Used by:
Cause: The password file could not be opened.
Remedy: Check the file.
------------------------------
Code: 2100EB84
Display: can't read in password file
Used by:
Cause: The password file header or offset table could not be read.
Remedy: Delete the file and re-create it.
------------------------------
Code: 2100EB85
Display: can't allocate data buffer
Used by:
Cause: Sufficient memory area could not be allocated for the password file.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EB86
Display: can't read password file
Used by:
Cause: The password file could not be read.
Remedy: Check the file.
------------------------------
Code: 2100EB87
Display: can't open level file
Used by:
Cause: The run level file (R0/USER/level) could not be opened.
Remedy: Check the file.
------------------------------
Code: 2100EB88
Display: can't read level file
Used by:
Cause: The run level file (R0/USER/level) header or offset table could not be read.
Remedy: Delete the file and re-create it.
------------------------------
Code: 2100EB89
Display: can't allocate data buffer
Used by:
Cause: Sufficient memory area could not be allocated for the run level file.
Remedy: Re-boot MCS.
------------------------------
Code: 2100EB8A
Display: can't read level file
Used by:
Cause: The run level file could not be read.
Remedy: Check the file.
------------------------------
Code: 2100EB8B
第 2085 页