FUJI错误代码查询.pdf - 第31页

Remedy: For the CP4 or CP43, change the value for one of the program items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part data items,&q…

items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part

data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. For the CP-

6/6M/65/642, change the nozzle assignment table to include the nozzles wihtin the range established in

part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data.

------------------------------

Code: 11011091

Display:

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP642,CP643

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size"(CP4,CP43). The nozzle size specified in

Part data (Nozzle_size_min .,Nozzle_size_max .) cannot be found in the nozzle assignment table(CP-

6/6M/65/642). The applicable part data is that listed in lines 14-26 in "D_data".

Remedy: For the CP4 or CP43, change the value for one of the program

items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part

data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. For the CP-

6/6M/65/642, change the nozzle assignment table to include the nozzles wihtin the range established in

part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data.

------------------------------

Code: 11011092

Display:

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP642,CP643

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size"(CP4,CP43). The nozzle size specified in

Part data (Nozzle_size_min .,Nozzle_size_max .) cannot be found in the nozzle assignment table(CP-

6/6M/65/642). The applicable part data is that listed in lines 27-39 in "D_data".

Remedy: For the CP4 or CP43, change the value for one of the program

items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part

data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. For the CP-

6/6M/65/642, change the nozzle assignment table to include the nozzles wihtin the range established in

part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data.

------------------------------

Code: 11011093

Display:

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP642,CP643

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size"(CP4,CP43). The nozzle size specified in

Part data (Nozzle_size_min .,Nozzle_size_max .) cannot be found in the nozzle assignment table(CP-

6/6M/65/642). The applicable part data is that listed in lines 40-52 in "D_data".

Remedy: For the CP4 or CP43, change the value for one of the program

items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part

data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. For the CP-

6/6M/65/642, change the nozzle assignment table to include the nozzles wihtin the range established in

part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data.

------------------------------

Code: 11011094

Display:

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP642,CP643

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size"(CP4,CP43). The nozzle size specified in

Part data (Nozzle_size_min .,Nozzle_size_max .) cannot be found in the nozzle assignment table(CP-

6/6M/65/642). The applicable part data is that listed in lines 53-65 in "D_data".

第 30 页

Remedy: For the CP4 or CP43, change the value for one of the program

items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part

data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. For the CP-

6/6M/65/642, change the nozzle assignment table to include the nozzles wihtin the range established in

part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data.

------------------------------

Code: 11011095

Display:

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP642,CP643

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size"(CP4,CP43). The nozzle size specified in

Part data (Nozzle_size_min .,Nozzle_size_max .) cannot be found in the nozzle assignment table(CP-

6/6M/65/642). The applicable part data is that listed in lines 66-78 in "D_data".

Remedy: For the CP4 or CP43, change the value for one of the program

items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part

data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. For the CP-

6/6M/65/642, change the nozzle assignment table to include the nozzles wihtin the range established in

part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data.

------------------------------

Code: 11011096

Display:

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP642,CP643

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size"(CP4,CP43). The nozzle size specified in

Part data (Nozzle_size_min .,Nozzle_size_max .) cannot be found in the nozzle assignment table(CP-

6/6M/65/642). The applicable part data is that listed in lines 79-91 in "D_data".

Remedy: For the CP4 or CP43, change the value for one of the program

items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part

data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. For the CP-

6/6M/65/642, change the nozzle assignment table to include the nozzles wihtin the range established in

part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data.

------------------------------

Code: 11011097

Display:

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP642,CP643

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size"(CP4,CP43). The nozzle size specified in

Part data (Nozzle_size_min .,Nozzle_size_max .) cannot be found in the nozzle assignment table(CP-

6/6M/65/642). The applicable part data is that listed in lines 92-104 in "D_data".

Remedy: For the CP4 or CP43, change the value for one of the program

items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part

data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. For the CP-

6/6M/65/642, change the nozzle assignment table to include the nozzles wihtin the range established in

part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data.

------------------------------

Code: 11011098

Display:

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP642,CP643

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size"(CP4,CP43). The nozzle size specified in

Part data (Nozzle_size_min .,Nozzle_size_max .) cannot be found in the nozzle assignment table(CP-

第 31 页

6/6M/65/642). The applicable part data is that listed in lines 105-117 in "D_data".

Remedy: For the CP4 or CP43, change the value for one of the program

items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part

data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. For the CP-

6/6M/65/642, change the nozzle assignment table to include the nozzles wihtin the range established in

part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data.

------------------------------

Code: 11011099

Display:

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP642,CP643

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size"(CP4,CP43). The nozzle size specified in

Part data (Nozzle_size_min .,Nozzle_size_max .) cannot be found in the nozzle assignment table(CP-

6/6M/65/642). The applicable part data is that listed in lines 118-130 in "D_data".

Remedy: For the CP4 or CP43, change the value for one of the program

items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part

data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. For the CP-

6/6M/65/642, change the nozzle assignment table to include the nozzles wihtin the range established in

part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data.

------------------------------

Code: 1101109A

Display:

Used by: CP4-1,CP4-2,CP4-3,CP6,CP6M,CP65,CP642,CP643

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size"(CP4,CP43). The nozzle size specified in

Part data (Nozzle_size_min .,Nozzle_size_max .) cannot be found in the nozzle assignment table(CP-

6/6M/65/642). The applicable part data is that listed in lines 131-140 in "D_data".The applicable part

data is that listed in lines 131-143 in "D_data"(CP43).

Remedy: For the CP4 or CP43, change the value for one of the program

items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size" so that it is within the range established in part

data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data. For the CP-

6/6M/65/642, change the nozzle assignment table to include the nozzles wihtin the range established in

part data items,"Nozzle_size_min" and "Nozzle_size_max". Alternatively, change the part data.

------------------------------

Code: 1101109B

Display:

Used by: CP4-3

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size". The applicable part data is that listed in

lines 144-156 in "D_data".

Remedy: Change the value for one of the program items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size"

so that it is within the range established in part data items,"Nozzle_size_min" and "Nozzle_size_max".

Alternatively, change the part data.

------------------------------

Code: 1101109C

Display:

Used by: CP4-3

Cause: The nozzle size specified in Part data (Nozzle_size_min.,Nozzle_size_max.) cannot be found in the

program items "S_nozzle_size","M_nozzle_size",or "L_nozzle_size". The applicable part data is that listed in

lines 157-160 in "D_data".

Remedy: Change the value for one of the program items,"S_nozzle_size","M_nozzle_size",or "L_nozzle_size"

第 32 页