FUJI错误代码查询.pdf - 第68页

Remedy: Set a correct "X" value in N_data in the production program. ------------------------------ Code: 1101C045 Display: Used by: Cause: The coordinates specified for the X-axis in placing sequence data are …

100%1 / 5282
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the +
direction. This error applies to sequences 261 to 280.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C03E
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the +
direction. This error applies to sequences 281 to 300.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C03F
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the +
direction. This error applies to sequences 301 to the final sequence.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C040
Display:
Used by: IP3
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 1 to 20.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C041
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 21 to 40.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C042
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 41 to 60.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C043
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 61 to 80.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C044
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 81 to 100.
第 67 页
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C045
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 101 to 120.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C046
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 121 to 140.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C047
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 141 to 160.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C048
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 161 to 180.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C049
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 181 to 200.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C04A
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 201 to 220.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C04B
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 221 to 240.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
第 68 页
Code: 1101C04C
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 241 to 260.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C04D
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 261 to 280.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C04E
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 281 to 300.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C04F
Display:
Used by:
Cause: The coordinates specified for the X-axis in placing sequence data are out of range in the -
direction. This error applies to sequences 301 to the final sequence.
Remedy: Set a correct "X" value in N_data in the production program.
------------------------------
Code: 1101C050
Display:
Used by: IP3
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the +
direction. This error applies to sequences 1 to 20.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C051
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the +
direction. This error applies to sequences 21 to 40.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C052
Display:
Used by:
Cause: The coordinates specified for the Y-axis in placing sequence data are out of range in the +
direction. This error applies to sequences 41 to 60.
Remedy: Set a correct "Y" value in N_data in the production program.
------------------------------
Code: 1101C053
Display:
第 69 页